Marlin-A4MaxPro-2.0.x

Marlin-A4MaxPro-2.0.x copied to clipboard

### Bug Description ### My Configurations **Required:** Please include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files. ### Steps to Reproduce 1. [First Step] 2. [Second Step] 3. [and...

anonimus25

[BUG] Constant reboot

11

Hi, thanks a lot for this firmware customization ! ### Bug Description My A4MaxPro keeps rebooting. ### My Configurations No modification in `Configuration.h` and `Configuration_adv.h` [Configuration.zip](https://github.com/Poket-Jony/Marlin-A4MaxPro-2.0.x/files/4535669/Configuration.zip) ### Steps to Reproduce...

MatLeb

Limit switch does not work

1

### Bug Description Limit switch does not work when connecting memory card ### My Configurations v2.1.9-rc (Marlin 2.0.x) ### Steps to Reproduce 1 Enable "Home All" or "Home Z" or...

WoodenLoony

BLTOUCH pin

20

How to wire BLTOUCH to anycubic 4 max pro?

kennethgomez01

[FR] Anycubic 4Max Pro v2 support

6

Hello, Anycubic 4Max Pro v2 is out. Is it tricky to add its support?

me21

It will be grateful to see Z_Offset menu in the 4 max pro printer screen, rather than hasstleling updating code and export to binary just to update the value of...

kennethgomez01

BLtouch precompiled

1

is there a precompiled file that I can just flash as im really new at this whole thing

usmcsni

Manual Bed Mesh Leveling/ Not work

3

Hi, Manual bed leveling does not work. On the SD card, manual leveling is available, the printer levels all 25 points. Unfortunately, at the end (after 20 seconds), nothing happens...

sambroprzem

[BUG] Compilation error with defined CASE_LIGHT_NO_BRIGHTNESS

1

When CASE_LIGHT_NO_BRIGHTNESS is defined in Configuration_adv.h, compilation is aborted with an error: ``` sketch/src/lcd/extui/lib/dwin/DwinTFTCommand.cpp: In member function 'void DwinTFTCommandClass::handleSetCaseLight()': sketch/src/lcd/extui/lib/dwin/DwinTFTCommand.cpp:600:29: error: 'getCaseLightBrightness_percent' is not a member of 'ExtUI' float brightness...

ABATAPA

### Bug Description The printer stops printing timer and shows the message "Printing Done, took x" if command M1001 (ideaMaker adds it by default). ### My Configurations Mainly default config...

UnoPromilo