Logging Settings on FC unclear

[christopherwhull]

Missing in the documentation What is the Debug setting needed on the FC, the output seems incorrect.

version

Betaflight / LUXF4OSD (LUX4) 3.4.0 Jul 2 2018 / 12:25:48 (463d7aa1c) MSP API: 1.39

set debug_mode = NOTCH

###ERROR### Invalid value Allowed values: NONE, CYCLETIME, BATTERY, GYRO_FILTERED, ACCELEROMETER, PIDLOOP, GYRO_SCALED, RC_INTERPOLATION, ANGLERATE, ESC_SENSOR, SCHEDULER, STACK, ESC_SENSOR_RPM, ESC_SENSOR_TMP, ALTITUDE, FFT, FFT_TIME, FFT_FREQ, RX_FRSKY_SPI, GYRO_RAW, DUAL_GYRO, DUAL_GYRO_RAW, DUAL_GYRO_COMBINE, DUAL_GYRO_DIFF, MAX7456_SIGNAL, MAX7456_SPICLOCK, SBUS, FPORT, RANGEFINDER, RANGEFINDER_QUALITY, LIDAR_TF, CORE_TEMP, RUNAWAY_TAKEOFF, SDIO, CURRENT_SENSOR, USB, SMARTAUDIO, RTH, ITERM_RELAX, ACRO_TRAINER, RC_SMOOTHING, RX_SIGNAL_LOSS, RC_SMOOTHING_RATE

[Lord-Quake]

It has changed: set debug_mode = gyro_scaled (Betaflight 3.4 and later) set debug_mode = notch (Betaflight 3.3 and earlier)