logiops
logiops copied to clipboard
PixlOne
Logi Bolt support
I have just bought a MX Master 3 mouse and it acts like it's not supported. With the last git version of logiops, I get the following error (it's only a warning but I guess it prevents the whole thing to work):
dimitri@corwin:~/logiops/build$ ./logid -vV [DEBUG] Unsupported device /dev/hidraw4 ignored [DEBUG] Unsupported device /dev/hidraw3 ignored [DEBUG] Unsupported device /dev/hidraw0 ignored [DEBUG] Unsupported device /dev/hidraw1 ignored [INFO] Detected receiver at /dev/hidraw2 [WARN] Error adding device /dev/hidraw2: No DJ reports
Here are some debugging information:
dimitri@corwin:~/logiops/build$ lsusb | grep Receiver Bus 001 Device 007: ID 046d:c548 Logitech, Inc. USB Receiver
dimitri@corwin:~/logiops/build$ sudo usbhid-dump -d 046d:c548
001:007:002:DESCRIPTOR 1646239789.856274
06 00 FF 09 01 A1 01 85 10 95 06 75 08 15 00 26
FF 00 09 01 81 00 09 01 91 00 C0 06 00 FF 09 02
A1 01 85 11 95 13 75 08 15 00 26 FF 00 09 02 81
00 09 02 91 00 C0
001:007:001:DESCRIPTOR 1646239789.857870 05 01 09 02 A1 01 85 02 09 01 A1 00 95 10 75 01 15 00 25 01 05 09 19 01 29 10 81 02 95 02 75 10 16 01 80 26 FF 7F 05 01 09 30 09 31 81 06 95 01 75 08 15 81 25 7F 09 38 81 06 95 01 05 0C 0A 38 02 81 06 C0 C0 05 0C 09 01 A1 01 85 03 95 02 75 10 15 01 26 FF 02 19 01 2A FF 02 81 00 C0 05 01 09 80 A1 01 85 04 95 01 75 02 15 01 25 03 09 82 09 81 09 83 81 00 75 01 15 00 25 01 09 9B 81 06 75 05 81 03 C0
001:007:000:DESCRIPTOR 1646239789.860069 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 05 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 70 75 01 05 07 19 04 29 73 81 02 95 05 19 87 29 8B 81 02 95 03 19 90 29 92 81 02 C0
Do you understand what happens?
Sorry, those aren't supported right now. I was looking into getting a Logi Bolt receiver to test it out, but that's not compatible with any of the devices I own.
If I find some documentation on it, I'll be glad to work on it though and perhaps you can test it out.
I would be happy to help you in any way. I'm a developer, this can make things easier.
For the moment, I will buy a Bluetooth receiver.
Thanks for your help.
Happy to help with testing here. I just picked up an MX Keys Mini for Business and an MX Master 3 for Business. I am using both via bluetooth at the moment, but plan to use the bolt receiver in the future.
I’m using the new MX Master 3S for a week and it comes with Logi Bolt by default. I’ve tried to deal with it, but DjReports probably won’t work there. Via Bluetooth, it works correctly. If you’ll need any info about the mouse/receiver I’d be happy to help you!
I was able to get the bolt dongle to connect my mouse (MX Master 3S), though it can be laggy. I was curious about getting support for it in the app.
root@arm-ubuntu2004:~# hostnamectl
Static hostname: arm-ubuntu2004
Pretty hostname: arm-ubuntu20_04
Icon name: computer-laptop
Chassis: laptop
Machine ID: c26f23b44f20474d8f6a35fe411b0c4c
Boot ID: 609050293e594547b77458078ccfa078
Operating System: Ubuntu 20.04.4 LTS
Kernel: Linux 5.14.0-1047-oem
Architecture: x86-64
root@arm-ubuntu2004:~# logid --version
v0.2.2-70-gdbe2b28
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0xc548
bcdDevice 5.01
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0054
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 4 MPR05.01_B0010
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 67
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 133
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 54
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
I have a "MX Master 3 for Business" that comes with a Logi Bolt adapter, and would be willing to help with implementing support for it. Any hints to where I should start?
@atombombzero I too have the Master 3S. Were you able to get the bolt working?
@atombombzero Just realized the bolt receiver isn't supported as well. I'm curious how you got this working.
Another new owner reporting in, are there any developments on this issue? Is there any info we could gather or could someone point to a stating point for getting it working?
Anybody make any progress with this yet? Haven't been able to make any headway myself.
I was able to make it work via Bluetooth but not the bolt connector. I have been using it for the past couple of days and haven't faced any lag via Bluetooth. Here's my config if anyone's interested (pretty minimalist) https://github.com/amitrajput1992/logiops/blob/master/logid.amit.cfg
I am using TPLink UB500, with Linux mint kernel 5.15.0-56-generic
I'm more than happy to help with any testing.
how about get some Logitech Bolt code from Solaar project ( https://github.com/pwr-Solaar/Solaar ) or it is not possible?
I worked around this by using Solaar (sudo apt install solaar on ubuntu). Now the DPI is configured to 2000.
I can't believe the default DPI is 1000, which is too small for 4K displayer!
A MX master 3S user here, connected via Bolt. Using solaar as a workaround for now(not a gui fan and I'm connecting the mouse via a kvm), hope the bolt support come soon!
A MX master 3S user here, connected via Bolt. Using solaar as a workaround for now(not a gui fan and I'm connecting the mouse via a kvm), hope the bolt support come soon!
Thank you, I had not heard of the solaar alternative. Are you able to disable mouse acceleration with it?
Thank you, I had not heard of the solaar alternative. Are you able to disable mouse acceleration with it?
Not sure about that, solaar is pretty basic. You can change the DPI tho.
Not sure about that, solaar is pretty basic. You can change the DPI tho.
Yeah, The solaar app is very limited, I cannot customize the side buttons on my mouse(M650 Signature). For the time being, I'm using bluetooth, which is very choppy at times.
Added Logi Bolt support in a branch that also adds preliminary GUI support and many other I/O fixes, please try #362.