lovelace-xiaomi-vacuum-map-card
lovelace-xiaomi-vacuum-map-card copied to clipboard
Published
20 hours ago •
PiotrMachowski
PiotrMachowski
Roborock room cleaning not working
Checklist
- [X] I have updated the card to the latest version available
- [X] I have cleared the cache of my browser
- [X] I have checked if the problem is already reported
The problem
I've noticed that when I select rooms through the card to clean, the vacuum will instead clean the entire floor. Before humbertogontijo/homeassistant-roborock was officially supported in the card, I was able to get everything working in the card through the setup in this issue.
What version of a card has described problem?
2.2.2
What was the last working version card?
not sure
What vacuum model do you have problems with?
Roborock S7
Which integration do you use to control your vacuum (link)?
https://github.com/humbertogontijo/homeassistant-roborock
What browser (browsers/apps) does have this problem?
all
What version of Home Assistant do you use?
2023.8.2
What type of installation are you running?
Home Assistant Container
Card's configuration
type: custom:xiaomi-vacuum-map-card
map_source:
camera: camera.roborock_s7_maxv_map
crop:
top: 60
bottom: 120
left: 80
right: 80
calibration_source:
camera: true
entity: vacuum.roborock_s7_maxv
vacuum_platform: humbertogontijo/homeassistant-roborock
map_modes:
- name: Zone cleanup
icon: mdi:select-drag
run_immediately: false
coordinates_rounding: true
coordinates_to_meters_divider: 1000
selection_type: MANUAL_RECTANGLE
max_selections: 5
repeats_type: EXTERNAL
max_repeats: 3
service_call_schema:
service: roborock.vacuum_clean_zone
service_data:
zone: '[[selection]]'
repeats: '[[repeats]]'
entity_id: '[[entity_id]]'
predefined_selections: []
variables: {}
- name: Pin & Go
icon: mdi:map-marker-plus
run_immediately: false
coordinates_rounding: true
coordinates_to_meters_divider: 1000
selection_type: MANUAL_POINT
max_selections: 999
repeats_type: NONE
max_repeats: 1
service_call_schema:
service: roborock.vacuum_goto
service_data:
x_coord: '[[point_x]]'
y_coord: '[[point_y]]'
entity_id: '[[entity_id]]'
predefined_selections: []
variables: {}
- name: Rooms
icon: mdi:floor-plan
run_immediately: false
coordinates_rounding: true
coordinates_to_meters_divider: 1000
selection_type: ROOM
max_selections: 999
repeats_type: EXTERNAL
max_repeats: 3
service_call_schema:
service: roborock.vacuum_clean_segment
service_data:
segments: '[[selection]]'
entity_id: '[[entity_id]]'
repeats: '[[repeats]]'
predefined_selections:
- id: '16'
icon:
name: mdi:silverware-fork-knife
x: 25950
'y': 26825
label:
text: Dining Area
x: 25950
'y': 26825
offset_y: 35
outline:
- - 24750
- 25250
- - 27150
- 25250
- - 27150
- 28400
- - 24750
- 28400
- id: '17'
icon:
name: mdi:door
x: 23450
'y': 28125
label:
text: Entryway
x: 23450
'y': 28125
offset_y: 35
outline:
- - 22150
- 26150
- - 24750
- 26150
- - 24750
- 30100
- - 22150
- 30100
- id: '18'
icon:
name: mdi:chef-hat
x: 28150
'y': 26600
label:
text: Kitchen
x: 28150
'y': 26600
offset_y: 35
outline:
- - 27100
- 25300
- - 29200
- 25300
- - 29200
- 27900
- - 27100
- 27900
- id: '19'
icon:
name: mdi:sofa
x: 21325
'y': 28125
label:
text: Living Room
x: 21325
'y': 28125
offset_y: 35
outline:
- - 19550
- 26150
- - 23100
- 26150
- - 23100
- 30100
- - 19550
- 30100
- id: '20'
icon:
name: mdi:stairs-down
x: 26350
'y': 30375
label:
text: Downstairs
x: 26350
'y': 30375
offset_y: 35
outline:
- - 25400
- 28400
- - 27300
- 28400
- - 27300
- 32350
- - 25400
- 32350
variables: {}
map_locked: true
card_mod:
style: |
.tile-wrapper.clickable.ripple.tile-wrapper {
background-color: #eeeeee;
border-radius: 10px;
color: #616161
}
:host
div.controls-wrapper>div.vacuum-controls>div {
background-color: #eeeeee;
color: #616161
}
div.controls-wrapper>div.map-controls-wrapper>div>div {
background-color: #D7EBFD;
color: #4D6173
}
div.controls-wrapper>div.map-controls-wrapper>div>div>paper-button.map-actions-item.main.clickable.ripple {
background-color: #BBCFE1;
color: #4D6173
}
div.controls-wrapper>div.map-controls-wrapper>div>ha-button-menu>div>paper-button {
background-color: #2196F3;
color: #D7EBFD
}
div.map-zoom-icons {
background-color: #D7EBFD;
color: #2196F3
}
div.map-zoom-icons>div {
background-color: #2196F3;
color: #D7EBFD
}
div.controls-wrapper>xvmc-icons-wrapper>div>div {
background-color: #D7EBFD;
color: #4D6173
}
div.controls-wrapper>div>div>xvmc-dropdown-menu>ha-button-menu>div>paper-button {
background-color: #D7EBFD;
color: #4D6173
}
#map-zoomer-overlay>div:nth-child(1)>ha-icon {
background-color: #A9A9A9;
color: #E5E5E5
}
icons:
- icon: mdi:play
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: cleaning
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: returning
tooltip: Start
tap_action:
action: call-service
service: vacuum.start
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:pause
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: idle
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: paused
tooltip: Pause
tap_action:
action: call-service
service: vacuum.pause
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:stop
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: idle
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: paused
tooltip: Stop
tap_action:
action: call-service
service: vacuum.stop
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:home-map-marker
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: returning
tooltip: Return to base
tap_action:
action: call-service
service: vacuum.return_to_base
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:target-variant
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: cleaning
- entity: vacuum.roborock_s7_maxv
value_not: returning
tooltip: Clean spot
tap_action:
action: call-service
service: vacuum.clean_spot
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:map-marker
tooltip: Locate
tap_action:
action: call-service
service: vacuum.locate
service_data:
entity_id: vacuum.roborock_s7_maxv
- menu_id: fan_speed
icon: mdi:fan-alert
label: 'off'
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: 'off'
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: 'off'
- menu_id: fan_speed
icon: mdi:fan-alert
label: quiet
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: quiet
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: quiet
- menu_id: fan_speed
icon: mdi:fan-alert
label: balanced
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: balanced
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: balanced
- menu_id: fan_speed
icon: mdi:fan-alert
label: Turbo
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: turbo
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: turbo
- menu_id: fan_speed
icon: mdi:fan-alert
label: max
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: max
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: max
- menu_id: fan_speed
icon: mdi:fan-alert
label: custom
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: custom
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: custom
- menu_id: fan_speed
icon: mdi:fan-alert
label: max_plus
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: max_plus
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: max_plus
- icon: mdi:fan-alert
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: 'off'
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: quiet
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: balanced
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: turbo
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: max
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: custom
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: max_plus
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: 'off'
- type: menu
menu_id: water_box_mode
icon_id: water_box_mode
available_values_attribute: options
icon: mdi:water
icon_mapping:
'off': mdi:water-remove
mild: mdi:water-minus
moderate: mdi:water
intense: mdi:water-plus
custom: mdi:water-sync
tap_action:
action: call-service
service: select.select_option
service_data:
option: '[[value]]'
entity_id: '[[entity_id]]'
entity: select.roborock_s7_maxv_mop_intensity
- type: menu
menu_id: mop_mode
icon_id: mop_mode
available_values_attribute: options
icon: mdi:water
icon_mapping:
standard: mdi:standard-definition
deep: mdi:high-definition
deep_plus: mdi:ultra-high-definition
custom: mdi:fit-to-screen-outline
tap_action:
action: call-service
service: select.select_option
service_data:
option: '[[value]]'
entity_id: '[[entity_id]]'
entity: select.roborock_s7_maxv_mop_mode
tiles:
- tile_id: status
entity: vacuum.roborock_s7_maxv
label: Status
attribute: status
icon: mdi:robot-vacuum
translations:
starting: Starting
charger disconnected: Charger disconnected
idle: Idle
remote control active: Remote control active
cleaning: Cleaning
returning home: Returning home
manual mode: Manual mode
charging: Charging
charging problem: Charging problem
paused: Paused
spot cleaning: Spot cleaning
error: Error
shutting down: Shutting down
updating: Updating
docking: Docking
going to target: Going to target
zoned cleaning: Zoned cleaning
segment cleaning: Segment cleaning
emptying the bin: Emptying the bin
charging complete: Charging complete
device offline: Device offline
- tile_id: battery_level
entity: vacuum.roborock_s7_maxv
label: Battery
attribute: battery_level
icon_source: vacuum.roborock_s7_maxv.attributes.battery_icon
unit: '%'
- tile_id: fan_speed
entity: vacuum.roborock_s7_maxv
label: Fan speed
attribute: fan_speed
icon: mdi:fan
translations:
silent: Silent
standard: Standard
medium: Medium
turbo: Turbo
auto: Auto
gentle: Gentle
- tile_id: sensor_dirty_left
label: Sensors left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: sensor_dirty_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_sensor_dirty_left
icon: mdi:eye-outline
precision: 0
translations: {}
- tile_id: filter_left
label: Filter left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: filter_work_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_filter_left
icon: mdi:air-filter
precision: 0
translations: {}
- tile_id: main_brush_left
label: Main brush left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: main_brush_work_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_main_brush_left
icon: mdi:brush
precision: 0
translations: {}
- tile_id: side_brush_left
label: Side brush left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: side_brush_work_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_side_brush_left
icon: mdi:brush
precision: 0
translations: {}
- tile_id: cleaning_count
label: Cleaning count
entity: sensor.roborock_s7_maxv_total_clean_count
icon: mdi:counter
precision: 0
translations: {}
additional_presets: []
Javascript errors shown in the browser's console (if applicable)
none
Additional information
none
Are you sure room ids are correct?
I didn't make any changes to them after setting up the card. Is there a way to verify them?
They should be visible in attributes of the camera entity (in dev tools)
Can you show your service call? It is shown in a popup when you long press "Start" button or add debug: true to your config
Not able to copy the message from the popup, but here's a screenshot:
Thanks for the help btw!
Made the change, but can't test until tomorrow. I'll comment back after testing.
Just tested and same issue. Started a room cleaning but it just starts cleaning the whole floor.
One more thing to check: can you try starting the cleaning manually in dev tools?
Tried this and it worked:
service: roborock.vacuum_clean_segment
target:
entity_id: vacuum.roborock_s7_maxv
data:
segments:
- 18
Does this one work?
service: roborock.vacuum_clean_segment
data:
entity_id: vacuum.roborock_s7_maxv
repeats: 1
segments:
- 16
Try to use this config:
type: custom:xiaomi-vacuum-map-card
map_source:
camera: camera.roborock_s7_maxv_map
crop:
top: 60
bottom: 120
left: 80
right: 80
calibration_source:
camera: true
entity: vacuum.roborock_s7_maxv
vacuum_platform: humbertogontijo/homeassistant-roborock
map_modes:
- template: vacuum_clean_zone
- template: vacuum_goto
- template: vacuum_clean_segment
id_type: "number"
predefined_selections:
- id: '16'
icon:
name: mdi:silverware-fork-knife
x: 25950
'y': 26825
label:
text: Dining Area
x: 25950
'y': 26825
offset_y: 35
outline:
- - 24750
- 25250
- - 27150
- 25250
- - 27150
- 28400
- - 24750
- 28400
- id: '17'
icon:
name: mdi:door
x: 23450
'y': 28125
label:
text: Entryway
x: 23450
'y': 28125
offset_y: 35
outline:
- - 22150
- 26150
- - 24750
- 26150
- - 24750
- 30100
- - 22150
- 30100
- id: '18'
icon:
name: mdi:chef-hat
x: 28150
'y': 26600
label:
text: Kitchen
x: 28150
'y': 26600
offset_y: 35
outline:
- - 27100
- 25300
- - 29200
- 25300
- - 29200
- 27900
- - 27100
- 27900
- id: '19'
icon:
name: mdi:sofa
x: 21325
'y': 28125
label:
text: Living Room
x: 21325
'y': 28125
offset_y: 35
outline:
- - 19550
- 26150
- - 23100
- 26150
- - 23100
- 30100
- - 19550
- 30100
- id: '20'
icon:
name: mdi:stairs-down
x: 26350
'y': 30375
label:
text: Downstairs
x: 26350
'y': 30375
offset_y: 35
outline:
- - 25400
- 28400
- - 27300
- 28400
- - 27300
- 32350
- - 25400
- 32350
variables: {}
map_locked: true
card_mod:
style: |
.tile-wrapper.clickable.ripple.tile-wrapper {
background-color: #eeeeee;
border-radius: 10px;
color: #616161
}
:host
div.controls-wrapper>div.vacuum-controls>div {
background-color: #eeeeee;
color: #616161
}
div.controls-wrapper>div.map-controls-wrapper>div>div {
background-color: #D7EBFD;
color: #4D6173
}
div.controls-wrapper>div.map-controls-wrapper>div>div>paper-button.map-actions-item.main.clickable.ripple {
background-color: #BBCFE1;
color: #4D6173
}
div.controls-wrapper>div.map-controls-wrapper>div>ha-button-menu>div>paper-button {
background-color: #2196F3;
color: #D7EBFD
}
div.map-zoom-icons {
background-color: #D7EBFD;
color: #2196F3
}
div.map-zoom-icons>div {
background-color: #2196F3;
color: #D7EBFD
}
div.controls-wrapper>xvmc-icons-wrapper>div>div {
background-color: #D7EBFD;
color: #4D6173
}
div.controls-wrapper>div>div>xvmc-dropdown-menu>ha-button-menu>div>paper-button {
background-color: #D7EBFD;
color: #4D6173
}
#map-zoomer-overlay>div:nth-child(1)>ha-icon {
background-color: #A9A9A9;
color: #E5E5E5
}
icons:
- icon: mdi:play
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: cleaning
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: returning
tooltip: Start
tap_action:
action: call-service
service: vacuum.start
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:pause
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: idle
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: paused
tooltip: Pause
tap_action:
action: call-service
service: vacuum.pause
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:stop
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: idle
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: paused
tooltip: Stop
tap_action:
action: call-service
service: vacuum.stop
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:home-map-marker
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: returning
tooltip: Return to base
tap_action:
action: call-service
service: vacuum.return_to_base
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:target-variant
conditions:
- entity: vacuum.roborock_s7_maxv
value_not: docked
- entity: vacuum.roborock_s7_maxv
value_not: error
- entity: vacuum.roborock_s7_maxv
value_not: cleaning
- entity: vacuum.roborock_s7_maxv
value_not: returning
tooltip: Clean spot
tap_action:
action: call-service
service: vacuum.clean_spot
service_data:
entity_id: vacuum.roborock_s7_maxv
- icon: mdi:map-marker
tooltip: Locate
tap_action:
action: call-service
service: vacuum.locate
service_data:
entity_id: vacuum.roborock_s7_maxv
- menu_id: fan_speed
icon: mdi:fan-alert
label: 'off'
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: 'off'
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: 'off'
- menu_id: fan_speed
icon: mdi:fan-alert
label: quiet
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: quiet
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: quiet
- menu_id: fan_speed
icon: mdi:fan-alert
label: balanced
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: balanced
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: balanced
- menu_id: fan_speed
icon: mdi:fan-alert
label: Turbo
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: turbo
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: turbo
- menu_id: fan_speed
icon: mdi:fan-alert
label: max
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: max
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: max
- menu_id: fan_speed
icon: mdi:fan-alert
label: custom
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: custom
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: custom
- menu_id: fan_speed
icon: mdi:fan-alert
label: max_plus
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value: max_plus
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: max_plus
- icon: mdi:fan-alert
conditions:
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: 'off'
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: quiet
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: balanced
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: turbo
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: max
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: custom
- entity: vacuum.roborock_s7_maxv
attribute: fan_speed
value_not: max_plus
tooltip: Change fan speed
tap_action:
action: call-service
service: vacuum.set_fan_speed
service_data:
entity_id: vacuum.roborock_s7_maxv
fan_speed: 'off'
- type: menu
menu_id: water_box_mode
icon_id: water_box_mode
available_values_attribute: options
icon: mdi:water
icon_mapping:
'off': mdi:water-remove
mild: mdi:water-minus
moderate: mdi:water
intense: mdi:water-plus
custom: mdi:water-sync
tap_action:
action: call-service
service: select.select_option
service_data:
option: '[[value]]'
entity_id: '[[entity_id]]'
entity: select.roborock_s7_maxv_mop_intensity
- type: menu
menu_id: mop_mode
icon_id: mop_mode
available_values_attribute: options
icon: mdi:water
icon_mapping:
standard: mdi:standard-definition
deep: mdi:high-definition
deep_plus: mdi:ultra-high-definition
custom: mdi:fit-to-screen-outline
tap_action:
action: call-service
service: select.select_option
service_data:
option: '[[value]]'
entity_id: '[[entity_id]]'
entity: select.roborock_s7_maxv_mop_mode
tiles:
- tile_id: status
entity: vacuum.roborock_s7_maxv
label: Status
attribute: status
icon: mdi:robot-vacuum
translations:
starting: Starting
charger disconnected: Charger disconnected
idle: Idle
remote control active: Remote control active
cleaning: Cleaning
returning home: Returning home
manual mode: Manual mode
charging: Charging
charging problem: Charging problem
paused: Paused
spot cleaning: Spot cleaning
error: Error
shutting down: Shutting down
updating: Updating
docking: Docking
going to target: Going to target
zoned cleaning: Zoned cleaning
segment cleaning: Segment cleaning
emptying the bin: Emptying the bin
charging complete: Charging complete
device offline: Device offline
- tile_id: battery_level
entity: vacuum.roborock_s7_maxv
label: Battery
attribute: battery_level
icon_source: vacuum.roborock_s7_maxv.attributes.battery_icon
unit: '%'
- tile_id: fan_speed
entity: vacuum.roborock_s7_maxv
label: Fan speed
attribute: fan_speed
icon: mdi:fan
translations:
silent: Silent
standard: Standard
medium: Medium
turbo: Turbo
auto: Auto
gentle: Gentle
- tile_id: sensor_dirty_left
label: Sensors left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: sensor_dirty_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_sensor_dirty_left
icon: mdi:eye-outline
precision: 0
translations: {}
- tile_id: filter_left
label: Filter left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: filter_work_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_filter_left
icon: mdi:air-filter
precision: 0
translations: {}
- tile_id: main_brush_left
label: Main brush left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: main_brush_work_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_main_brush_left
icon: mdi:brush
precision: 0
translations: {}
- tile_id: side_brush_left
label: Side brush left
unit: h
multiplier: 0.0002777777777777778
hold_action:
action: call-service
service: vacuum.send_command
confirmation: {}
service_data:
command: reset_consumable
params: side_brush_work_time
entity_id: vacuum.roborock_s7_maxv
entity: sensor.roborock_s7_maxv_side_brush_left
icon: mdi:brush
precision: 0
translations: {}
- tile_id: cleaning_count
label: Cleaning count
entity: sensor.roborock_s7_maxv_total_clean_count
icon: mdi:counter
precision: 0
translations: {}
It should be also ok to remove tiles and icons from config
Hi, I've got similar problem, but when I choose Room cleaning - nothing happens. Can You help? My vacuum is: roborock.vacuum.m1s Standard integration: Xiaomi Miio
My config:
type: custom:xiaomi-vacuum-map-card
map_source:
camera: camera.xiaomi_cloud_map_extractor
calibration_source:
camera: true
entity: vacuum.robot_odkurzajacy
vacuum_platform: default
title: Odkurzanie
map_modes:
- template: vacuum_clean_zone
- template: vacuum_goto
- template: vacuum_clean_segment
id_type: number
predefined_selections:
- id: '16'
icon:
name: mdi:bed
x: 24475
'y': 27425
label:
text: Sypialnia
x: 24475
'y': 27425
offset_y: 35
outline:
- - 22900
- 25300
- - 26050
- 25300
- - 26050
- 29550
- - 22900
- 29550
- id: '17'
icon:
name: mdi:broom
x: 26925
'y': 29675
label:
text: Przedpokój
x: 26925
'y': 29675
offset_y: 35
outline:
- - 26100
- 27150
- - 27750
- 27150
- - 27750
- 32200
- - 26100
- 32200
- id: '18'
icon:
name: mdi:bathtub
x: 26825
'y': 26075
label:
text: Łazienka
x: 26825
'y': 26075
offset_y: 35
outline:
- - 26150
- 25050
- - 27500
- 25050
- - 27500
- 27100
- - 26150
- 27100
- id: '19'
icon:
name: mdi:broom
x: 24500
'y': 31175
label:
text: Kuchnia
x: 24500
'y': 31175
offset_y: 35
outline:
- - 22850
- 30650
- - 26150
- 30650
- - 26150
- 31700
- - 22850
- 31700
- id: '20'
icon:
name: mdi:broom
x: 25200
'y': 33750
label:
text: Salon
x: 25200
'y': 33750
offset_y: 35
outline:
- - 23393
- 32194
- - 27056
- 32194
- - 27056
- 35349
- - 23393
- 35349
variables: {}
map_locked: true
@MagnusS8 It is a different problem.
It might work with following config:
...
- template: vacuum_clean_segment
repeats_type: REPEAT
service_call_schema:
service: xiaomi_miio.vacuum_clean_segment
service_data:
segments: '[[selection]]'
entity_id: '[[entity_id]]'
predefined_selections:
...
@PiotrMachowski Looks like I was wrong. The config you provided did fix room cleaning for when you only select one room. If you select more than 1, it cleans the whole floor like the original issue.
Ya that one. It's strange, it just seems to be inconsistent. The vacuum will respond with different things based on what I tell it to do. Sometimes it does the selective cleaning, with ether 1 or multiple rooms, and sometimes it just starts cleaning the entire floor.
I'm sorry for my poor English. The following sections are for translation.I'm not sure if you can understand. I've got similar problem. it work well when i try starting the cleaning manually in dev tools.
service: dreame_vacuum.vacuum_clean_segment
data:
entity_id: vacuum.dreamebot_s10
repeats: 1
segments:
- 8
and
service: dreame_vacuum.vacuum_clean_segment
target:
entity_id: vacuum.dreamebot_s10
data:
segments:
- 8
But operating in the card will clean the entire room when I operate in the dashboard. My config:
type: custom:xiaomi-vacuum-map-card
entity: vacuum.dreamebot_s10
language: zh
vacuum_platform: default
map_source:
image: /local/ui/设备/扫地机器人白底平面图.png
crop:
top: 30
bottom: 0
calibration_source:
calibration_points:
- vacuum:
x: -8150
y: -950
map:
x: 3715
y: 386
- vacuum:
x: -8150
y: 6350
map:
x: 3715
y: 1843
- vacuum:
x: 8250
y: 6350
map:
x: 439
y: 1843
- vacuum:
x: 8250
y: -950
map:
x: 439
y: 386
two_finger_pan: true
map_locked: true
tiles:
- tile_id: status
label: '扫地机器人状态'
icon: mdi:robot-vacuum
entity: sensor.dreamebot_s10_auto_empty_status
precision: 0
tap_action:
action: none
double_tap_action:
action: none
hold_action:
action: none
translations:
unknown: 设备断开
idle: 空闲
paused: 暂停
cleaning: 正在轻松到
returning: 返回基站
spot_cleaning: 定点清扫
follow_wall_cleaning: 跟随墙壁清洁
charging: 充电
ota: 升级
fct: 功能测试
wifi_set: 设置wifi,
power_off: 关机
factory: 关机
error: 错误
remote_control: 远程遥控
sleeping: 睡眠
self_test: 自检
factory_test: 出厂检验
standby: 待机
room_cleaning: 分区扫清
zone_cleaning: 划区扫清
fast_mapping: 绘制地图
monitor_cruise: 摄像头监控
monitor_spot: 摄像头点监控
summon_clean: 召唤清理
- tile_id: battery_level
entity: sensor.dreamebot_s10_battery_level
label: '电量'
icon: mdi:battery-charging-100
unit: '%'
tap_action:
action: none
double_tap_action:
action: none
hold_action:
action: none
- tile_id: cleaning_mode
entity: vacuum.dreamebot_s10
attribute: cleaning_mode
label: '清洁模式'
icon: mdi:hydro-power
tap_action:
action: call-service
service: dreame_vacuum.select_select_next
data:
cycle: true
target:
entity_id: select.dreamebot_s10_cleaning_mode
double_tap_action:
action: none
hold_action:
action: more-info
translations:
'sweeping': 扫地
'mopping': 拖地
'sweeping and mopping': 扫拖
- tile_id: fan_speed
entity: select.dreamebot_s10_suction_level
label: '吸力等级'
icon: mdi:fan
tap_action:
action: call-service
service: dreame_vacuum.select_select_next
data:
cycle: true
target:
entity_id: select.dreamebot_s10_suction_level
double_tap_action:
action: none
hold_action:
action: more-info
translations:
'quiet': 安静
'standard': 标准
'strong': 强力
'turbo': 超强
'unavailable': 不启用
- tile_id: mop_humidity
entity: vacuum.dreamebot_s10
attribute: mop_pad_humidity
label: '拖布湿度'
icon: mdi:fan
tap_action:
action: call-service
service: dreame_vacuum.select_select_next
data:
cycle: true
target:
entity_id: select.dreamebot_s10_mop_pad_humidity
double_tap_action:
action: none
hold_action:
action: more-info
translations:
'slightly dry': 偏干
'moist': 标准
'wet': 偏湿
'unavailable': 不启用
icons:
- icon: mdi:play
conditions:
- entity: vacuum.dreamebot_s10
value_not: cleaning
- entity: vacuum.dreamebot_s10
value_not: error
- entity: vacuum.dreamebot_s10
value_not: returning
tooltip: '开始'
tap_action:
action: call-service
service: vacuum.start
service_data:
entity_id: vacuum.dreamebot_s10
- icon: mdi:stop
conditions:
- entity: vacuum.dreamebot_s10
value_not: docked
- entity: vacuum.dreamebot_s10
value_not: idle
- entity: vacuum.dreamebot_s10
value_not: error
- entity: vacuum.dreamebot_s10
value_not: paused
tooltip: '暂停'
tap_action:
action: call-service
service: vacuum.stop
service_data:
entity_id: vacuum.dreamebot_s10
- icon: mdi:home-map-marker
conditions:
- entity: vacuum.dreamebot_s10
value_not: docked
- entity: vacuum.dreamebot_s10
value_not: returning
tooltip: '返回基站'
tap_action:
action: call-service
service: vacuum.return_to_base
service_data:
entity_id: vacuum.dreamebot_s10
- icon: mdi:map-marker
tooltip: '定位'
tap_action:
action: call-service
service: vacuum.locate
service_data:
entity_id: vacuum.dreamebot_s10
hold_action:
action: none
map_modes:
- template: vacuum_clean_zone
name: 划区扫清
icon: mdi:select-drag
max_selections: 10
repeats_type: EXTERNAL
max_repeats: 3
service_call_schema:
service: dreame_vacuum.vacuum_clean_zone
service_data:
entity_id: '[[entity_id]]'
zone: '[[selection]]'
repeats: '[[repeats]]'
- name: 指哪到哪
icon: mdi:map-marker-plus
max_repeats: 3
selection_type: MANUAL_POINT
repeats_type: EXTERNAL
service_call_schema:
service: dreame_vacuum.vacuum_clean_spot
service_data:
entity_id: '[[entity_id]]'
points: '[[selection]]'
repeats: '[[repeats]]'
- template: vacuum_clean_segment
name: 分区清扫
icon: mdi:floor-plan
repeats_type: EXTERNAL
max_repeats: 3
service_call_schema:
service: dreame_vacuum.vacuum_clean_segment
service_data:
entity_id: '[[entity_id]]'
segments: '[[selection]]'
repeats: '[[repeats]]'
predefined_selections:
- id: '1'
icon:
name: mdi:broom
x: -575
'y': 5000
label:
text: '次卧'
x: -575
'y': 5000
offset_y: 35
outline:
- - -1850
- 3550
- - 990
- 3550
- - 990
- 6570
- - -2550
- 6570
- - -2550
- 5340
- - -1850
- 5340
- id: '2'
icon:
name: mdi:broom
x: -3900
'y': 3600
label:
text: '书房'
x: -3900
'y': 3600
offset_y: 35
outline:
- - -5470
- 2400
- - -2000
- 2400
- - -2000
- 4890
- - -2400
- 4890
- - -2400
- 5040
- - -5270
- 5040
- - -5270
- 4840
- - -5470
- 4840
- id: '3'
icon:
name: mdi:broom
x: -375
'y': 2800
label:
text: '走廊'
x: -375
'y': 2800
offset_x: 35
outline:
- - -1850
- 2270
- - 1120
- 2270
- - 1120
- 3400
- - -1850
- 3400
- id: '4'
icon:
name: mdi:broom
x: 6925
'y': 2575
label:
text: '餐厅'
x: 6925
'y': 2575
offset_y: 35
outline:
- - 5610
- 1225
- - 8340
- 1225
- - 8340
- 4315
- - 7580
- 4315
- - 7580
- 4225
- - 5610
- 4225
- id: '5'
icon:
name: mdi:broom
x: 600
'y': -400
label:
text: '主卫'
x: 600
'y': -400
offset_x: 35
outline:
- - -700
- -1035
- - 1700
- -1035
- - 1700
- -65
- - 1200
- -65
- - 1200
- 85
- - 770
- 85
- - 400
- 315
- - -700
- 315
- id: '6'
icon:
name: mdi:broom
x: -3025
'y': 600
label:
text: '主卧'
x: -3025
'y': 600
offset_y: 35
outline:
- - -4850
- -1035
- - -850
- -1035
- - -850
- 2120
- - -2000
- 2120
- - -2000
- 2250
- - -4850
- 2250
- id: '7'
icon:
name: mdi:broom
x: 225
'y': 1225
label:
text: '公卫'
x: 225
'y': 1225
offset_y: 35
outline:
- - -600
- 465
- - 1200
- 465
- - 1200
- 1470
- - 1050
- 1470
- - 1050
- 2120
- - -600
- 2120
- id: '8'
icon:
name: mdi:broom
x: 3400
'y': 2225
label:
text: '客厅'
x: 3400
'y': 2225
offset_y: 35
outline:
- - 1850
- 265
- - 5610
- 265
- - 5610
- 4225
- - 1120
- 4225
- - 1120
- 2270
- - 1450
- 2270
- - 1450
- 465
- - 1850
- 465
variables: {}
Previously, this configuration was able to function normally, but recently it was found to be invalid, perhaps after supporting Tashack/dream vacuum integration
@13860605362 try this one:
Config
type: custom:xiaomi-vacuum-map-card
entity: vacuum.dreamebot_s10
language: zh
vacuum_platform: default
map_source:
image: /local/ui/设备/扫地机器人白底平面图.png
crop:
top: 30
bottom: 0
calibration_source:
calibration_points:
- vacuum:
x: -8150
y: -950
map:
x: 3715
y: 386
- vacuum:
x: -8150
y: 6350
map:
x: 3715
y: 1843
- vacuum:
x: 8250
y: 6350
map:
x: 439
y: 1843
- vacuum:
x: 8250
y: -950
map:
x: 439
y: 386
two_finger_pan: true
map_locked: true
tiles:
- tile_id: status
label: '扫地机器人状态'
icon: mdi:robot-vacuum
entity: sensor.dreamebot_s10_auto_empty_status
precision: 0
tap_action:
action: none
double_tap_action:
action: none
hold_action:
action: none
translations:
unknown: 设备断开
idle: 空闲
paused: 暂停
cleaning: 正在轻松到
returning: 返回基站
spot_cleaning: 定点清扫
follow_wall_cleaning: 跟随墙壁清洁
charging: 充电
ota: 升级
fct: 功能测试
wifi_set: 设置wifi,
power_off: 关机
factory: 关机
error: 错误
remote_control: 远程遥控
sleeping: 睡眠
self_test: 自检
factory_test: 出厂检验
standby: 待机
room_cleaning: 分区扫清
zone_cleaning: 划区扫清
fast_mapping: 绘制地图
monitor_cruise: 摄像头监控
monitor_spot: 摄像头点监控
summon_clean: 召唤清理
- tile_id: battery_level
entity: sensor.dreamebot_s10_battery_level
label: '电量'
icon: mdi:battery-charging-100
unit: '%'
tap_action:
action: none
double_tap_action:
action: none
hold_action:
action: none
- tile_id: cleaning_mode
entity: vacuum.dreamebot_s10
attribute: cleaning_mode
label: '清洁模式'
icon: mdi:hydro-power
tap_action:
action: call-service
service: dreame_vacuum.select_select_next
data:
cycle: true
target:
entity_id: select.dreamebot_s10_cleaning_mode
double_tap_action:
action: none
hold_action:
action: more-info
translations:
'sweeping': 扫地
'mopping': 拖地
'sweeping and mopping': 扫拖
- tile_id: fan_speed
entity: select.dreamebot_s10_suction_level
label: '吸力等级'
icon: mdi:fan
tap_action:
action: call-service
service: dreame_vacuum.select_select_next
data:
cycle: true
target:
entity_id: select.dreamebot_s10_suction_level
double_tap_action:
action: none
hold_action:
action: more-info
translations:
'quiet': 安静
'standard': 标准
'strong': 强力
'turbo': 超强
'unavailable': 不启用
- tile_id: mop_humidity
entity: vacuum.dreamebot_s10
attribute: mop_pad_humidity
label: '拖布湿度'
icon: mdi:fan
tap_action:
action: call-service
service: dreame_vacuum.select_select_next
data:
cycle: true
target:
entity_id: select.dreamebot_s10_mop_pad_humidity
double_tap_action:
action: none
hold_action:
action: more-info
translations:
'slightly dry': 偏干
'moist': 标准
'wet': 偏湿
'unavailable': 不启用
icons:
- icon: mdi:play
conditions:
- entity: vacuum.dreamebot_s10
value_not: cleaning
- entity: vacuum.dreamebot_s10
value_not: error
- entity: vacuum.dreamebot_s10
value_not: returning
tooltip: '开始'
tap_action:
action: call-service
service: vacuum.start
service_data:
entity_id: vacuum.dreamebot_s10
- icon: mdi:stop
conditions:
- entity: vacuum.dreamebot_s10
value_not: docked
- entity: vacuum.dreamebot_s10
value_not: idle
- entity: vacuum.dreamebot_s10
value_not: error
- entity: vacuum.dreamebot_s10
value_not: paused
tooltip: '暂停'
tap_action:
action: call-service
service: vacuum.stop
service_data:
entity_id: vacuum.dreamebot_s10
- icon: mdi:home-map-marker
conditions:
- entity: vacuum.dreamebot_s10
value_not: docked
- entity: vacuum.dreamebot_s10
value_not: returning
tooltip: '返回基站'
tap_action:
action: call-service
service: vacuum.return_to_base
service_data:
entity_id: vacuum.dreamebot_s10
- icon: mdi:map-marker
tooltip: '定位'
tap_action:
action: call-service
service: vacuum.locate
service_data:
entity_id: vacuum.dreamebot_s10
hold_action:
action: none
map_modes:
- template: vacuum_clean_zone
name: 划区扫清
icon: mdi:select-drag
max_selections: 10
repeats_type: EXTERNAL
max_repeats: 3
service_call_schema:
service: dreame_vacuum.vacuum_clean_zone
service_data:
entity_id: '[[entity_id]]'
zone: '[[selection]]'
repeats: '[[repeats]]'
- name: 指哪到哪
icon: mdi:map-marker-plus
max_repeats: 3
selection_type: MANUAL_POINT
repeats_type: EXTERNAL
service_call_schema:
service: dreame_vacuum.vacuum_clean_spot
service_data:
entity_id: '[[entity_id]]'
points: '[[selection]]'
repeats: '[[repeats]]'
- template: vacuum_clean_segment
name: 分区清扫
icon: mdi:floor-plan
repeats_type: EXTERNAL
max_repeats: 3
id_type: "number"
service_call_schema:
service: dreame_vacuum.vacuum_clean_segment
service_data:
entity_id: '[[entity_id]]'
segments: '[[selection]]'
repeats: '[[repeats]]'
predefined_selections:
- id: '1'
icon:
name: mdi:broom
x: -575
'y': 5000
label:
text: '次卧'
x: -575
'y': 5000
offset_y: 35
outline:
- - -1850
- 3550
- - 990
- 3550
- - 990
- 6570
- - -2550
- 6570
- - -2550
- 5340
- - -1850
- 5340
- id: '2'
icon:
name: mdi:broom
x: -3900
'y': 3600
label:
text: '书房'
x: -3900
'y': 3600
offset_y: 35
outline:
- - -5470
- 2400
- - -2000
- 2400
- - -2000
- 4890
- - -2400
- 4890
- - -2400
- 5040
- - -5270
- 5040
- - -5270
- 4840
- - -5470
- 4840
- id: '3'
icon:
name: mdi:broom
x: -375
'y': 2800
label:
text: '走廊'
x: -375
'y': 2800
offset_x: 35
outline:
- - -1850
- 2270
- - 1120
- 2270
- - 1120
- 3400
- - -1850
- 3400
- id: '4'
icon:
name: mdi:broom
x: 6925
'y': 2575
label:
text: '餐厅'
x: 6925
'y': 2575
offset_y: 35
outline:
- - 5610
- 1225
- - 8340
- 1225
- - 8340
- 4315
- - 7580
- 4315
- - 7580
- 4225
- - 5610
- 4225
- id: '5'
icon:
name: mdi:broom
x: 600
'y': -400
label:
text: '主卫'
x: 600
'y': -400
offset_x: 35
outline:
- - -700
- -1035
- - 1700
- -1035
- - 1700
- -65
- - 1200
- -65
- - 1200
- 85
- - 770
- 85
- - 400
- 315
- - -700
- 315
- id: '6'
icon:
name: mdi:broom
x: -3025
'y': 600
label:
text: '主卧'
x: -3025
'y': 600
offset_y: 35
outline:
- - -4850
- -1035
- - -850
- -1035
- - -850
- 2120
- - -2000
- 2120
- - -2000
- 2250
- - -4850
- 2250
- id: '7'
icon:
name: mdi:broom
x: 225
'y': 1225
label:
text: '公卫'
x: 225
'y': 1225
offset_y: 35
outline:
- - -600
- 465
- - 1200
- 465
- - 1200
- 1470
- - 1050
- 1470
- - 1050
- 2120
- - -600
- 2120
- id: '8'
icon:
name: mdi:broom
x: 3400
'y': 2225
label:
text: '客厅'
x: 3400
'y': 2225
offset_y: 35
outline:
- - 1850
- 265
- - 5610
- 265
- - 5610
- 4225
- - 1120
- 4225
- - 1120
- 2270
- - 1450
- 2270
- - 1450
- 465
- - 1850
- 465
variables: {}
@13860605362 try this one:
Config
type: custom:xiaomi-vacuum-map-card entity: vacuum.dreamebot_s10 language: zh vacuum_platform: default map_source: image: /local/ui/设备/扫地机器人白底平面图.png crop: top: 30 bottom: 0 calibration_source: calibration_points: - vacuum: x: -8150 y: -950 map: x: 3715 y: 386 - vacuum: x: -8150 y: 6350 map: x: 3715 y: 1843 - vacuum: x: 8250 y: 6350 map: x: 439 y: 1843 - vacuum: x: 8250 y: -950 map: x: 439 y: 386 two_finger_pan: true map_locked: true tiles: - tile_id: status label: '扫地机器人状态' icon: mdi:robot-vacuum entity: sensor.dreamebot_s10_auto_empty_status precision: 0 tap_action: action: none double_tap_action: action: none hold_action: action: none translations: unknown: 设备断开 idle: 空闲 paused: 暂停 cleaning: 正在轻松到 returning: 返回基站 spot_cleaning: 定点清扫 follow_wall_cleaning: 跟随墙壁清洁 charging: 充电 ota: 升级 fct: 功能测试 wifi_set: 设置wifi, power_off: 关机 factory: 关机 error: 错误 remote_control: 远程遥控 sleeping: 睡眠 self_test: 自检 factory_test: 出厂检验 standby: 待机 room_cleaning: 分区扫清 zone_cleaning: 划区扫清 fast_mapping: 绘制地图 monitor_cruise: 摄像头监控 monitor_spot: 摄像头点监控 summon_clean: 召唤清理 - tile_id: battery_level entity: sensor.dreamebot_s10_battery_level label: '电量' icon: mdi:battery-charging-100 unit: '%' tap_action: action: none double_tap_action: action: none hold_action: action: none - tile_id: cleaning_mode entity: vacuum.dreamebot_s10 attribute: cleaning_mode label: '清洁模式' icon: mdi:hydro-power tap_action: action: call-service service: dreame_vacuum.select_select_next data: cycle: true target: entity_id: select.dreamebot_s10_cleaning_mode double_tap_action: action: none hold_action: action: more-info translations: 'sweeping': 扫地 'mopping': 拖地 'sweeping and mopping': 扫拖 - tile_id: fan_speed entity: select.dreamebot_s10_suction_level label: '吸力等级' icon: mdi:fan tap_action: action: call-service service: dreame_vacuum.select_select_next data: cycle: true target: entity_id: select.dreamebot_s10_suction_level double_tap_action: action: none hold_action: action: more-info translations: 'quiet': 安静 'standard': 标准 'strong': 强力 'turbo': 超强 'unavailable': 不启用 - tile_id: mop_humidity entity: vacuum.dreamebot_s10 attribute: mop_pad_humidity label: '拖布湿度' icon: mdi:fan tap_action: action: call-service service: dreame_vacuum.select_select_next data: cycle: true target: entity_id: select.dreamebot_s10_mop_pad_humidity double_tap_action: action: none hold_action: action: more-info translations: 'slightly dry': 偏干 'moist': 标准 'wet': 偏湿 'unavailable': 不启用 icons: - icon: mdi:play conditions: - entity: vacuum.dreamebot_s10 value_not: cleaning - entity: vacuum.dreamebot_s10 value_not: error - entity: vacuum.dreamebot_s10 value_not: returning tooltip: '开始' tap_action: action: call-service service: vacuum.start service_data: entity_id: vacuum.dreamebot_s10 - icon: mdi:stop conditions: - entity: vacuum.dreamebot_s10 value_not: docked - entity: vacuum.dreamebot_s10 value_not: idle - entity: vacuum.dreamebot_s10 value_not: error - entity: vacuum.dreamebot_s10 value_not: paused tooltip: '暂停' tap_action: action: call-service service: vacuum.stop service_data: entity_id: vacuum.dreamebot_s10 - icon: mdi:home-map-marker conditions: - entity: vacuum.dreamebot_s10 value_not: docked - entity: vacuum.dreamebot_s10 value_not: returning tooltip: '返回基站' tap_action: action: call-service service: vacuum.return_to_base service_data: entity_id: vacuum.dreamebot_s10 - icon: mdi:map-marker tooltip: '定位' tap_action: action: call-service service: vacuum.locate service_data: entity_id: vacuum.dreamebot_s10 hold_action: action: none map_modes: - template: vacuum_clean_zone name: 划区扫清 icon: mdi:select-drag max_selections: 10 repeats_type: EXTERNAL max_repeats: 3 service_call_schema: service: dreame_vacuum.vacuum_clean_zone service_data: entity_id: '[[entity_id]]' zone: '[[selection]]' repeats: '[[repeats]]' - name: 指哪到哪 icon: mdi:map-marker-plus max_repeats: 3 selection_type: MANUAL_POINT repeats_type: EXTERNAL service_call_schema: service: dreame_vacuum.vacuum_clean_spot service_data: entity_id: '[[entity_id]]' points: '[[selection]]' repeats: '[[repeats]]' - template: vacuum_clean_segment name: 分区清扫 icon: mdi:floor-plan repeats_type: EXTERNAL max_repeats: 3 id_type: "number" service_call_schema: service: dreame_vacuum.vacuum_clean_segment service_data: entity_id: '[[entity_id]]' segments: '[[selection]]' repeats: '[[repeats]]' predefined_selections: - id: '1' icon: name: mdi:broom x: -575 'y': 5000 label: text: '次卧' x: -575 'y': 5000 offset_y: 35 outline: - - -1850 - 3550 - - 990 - 3550 - - 990 - 6570 - - -2550 - 6570 - - -2550 - 5340 - - -1850 - 5340 - id: '2' icon: name: mdi:broom x: -3900 'y': 3600 label: text: '书房' x: -3900 'y': 3600 offset_y: 35 outline: - - -5470 - 2400 - - -2000 - 2400 - - -2000 - 4890 - - -2400 - 4890 - - -2400 - 5040 - - -5270 - 5040 - - -5270 - 4840 - - -5470 - 4840 - id: '3' icon: name: mdi:broom x: -375 'y': 2800 label: text: '走廊' x: -375 'y': 2800 offset_x: 35 outline: - - -1850 - 2270 - - 1120 - 2270 - - 1120 - 3400 - - -1850 - 3400 - id: '4' icon: name: mdi:broom x: 6925 'y': 2575 label: text: '餐厅' x: 6925 'y': 2575 offset_y: 35 outline: - - 5610 - 1225 - - 8340 - 1225 - - 8340 - 4315 - - 7580 - 4315 - - 7580 - 4225 - - 5610 - 4225 - id: '5' icon: name: mdi:broom x: 600 'y': -400 label: text: '主卫' x: 600 'y': -400 offset_x: 35 outline: - - -700 - -1035 - - 1700 - -1035 - - 1700 - -65 - - 1200 - -65 - - 1200 - 85 - - 770 - 85 - - 400 - 315 - - -700 - 315 - id: '6' icon: name: mdi:broom x: -3025 'y': 600 label: text: '主卧' x: -3025 'y': 600 offset_y: 35 outline: - - -4850 - -1035 - - -850 - -1035 - - -850 - 2120 - - -2000 - 2120 - - -2000 - 2250 - - -4850 - 2250 - id: '7' icon: name: mdi:broom x: 225 'y': 1225 label: text: '公卫' x: 225 'y': 1225 offset_y: 35 outline: - - -600 - 465 - - 1200 - 465 - - 1200 - 1470 - - 1050 - 1470 - - 1050 - 2120 - - -600 - 2120 - id: '8' icon: name: mdi:broom x: 3400 'y': 2225 label: text: '客厅' x: 3400 'y': 2225 offset_y: 35 outline: - - 1850 - 265 - - 5610 - 265 - - 5610 - 4225 - - 1120 - 4225 - - 1120 - 2270 - - 1450 - 2270 - - 1450 - 465 - - 1850 - 465 variables: {}
I have tried to regenerate the card and the corresponding Vancum platform, and found that it is working properly, perhaps due to my previous settings or operation errors. Thank you for your answer