Dell-Inspiron-7590-Hackintosh-Opencore icon indicating copy to clipboard operation
Dell-Inspiron-7590-Hackintosh-Opencore copied to clipboard

现在7590关闭安全引导,OC引导的话启动项里就压根没有。。

Open 1hdtpdc1 opened this issue 4 years ago • 22 comments

1hdtpdc1 avatar May 11 '20 15:05 1hdtpdc1

大兄弟啊,我关了安全引导后,发现如果用oc引导的话,就压根没有从u盘启动的启动项,但是clover引导的的话就ok,我最后没有办法了,就用tctien大神的clover引导安装了。我也不知道为什么😓

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020年5月12日 14:11 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

关闭 Secure Boot 是黑苹果的必要条件啊…… 这是必须关的

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 12 '20 06:05 1hdtpdc1

那就奇怪了啊……不过也有可能后期我对 OC 做改动可能影响到 U 盘读取了…… 总之感谢反馈,我这边也再测试下。毕竟现在我自己没什么安装需求了可能也忽视了这个。

Pinming avatar May 12 '20 11:05 Pinming

嗯嗯,谢谢。

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020年5月12日 19:48 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

那就奇怪了啊……不过也有可能后期我对 OC 做改动可能影响到 U 盘读取了…… 总之感谢反馈,我这边也再测试下。毕竟现在我自己没什么安装需求了可能也忽视了这个。

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 12 '20 13:05 1hdtpdc1

还有使用tctien十几天前的clover版efi安装后,笔记本上的触控板无效,大佬可以帮忙解决一下吗?

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020年5月12日 19:48 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

那就奇怪了啊……不过也有可能后期我对 OC 做改动可能影响到 U 盘读取了…… 总之感谢反馈,我这边也再测试下。毕竟现在我自己没什么安装需求了可能也忽视了这个。

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 12 '20 14:05 1hdtpdc1

还有使用 tctien 十几天前的 clover 版 efi 安装后,笔记本上的触控板无效,大佬可以帮忙解决一下吗?

触控板一般而言是安装上去初次进入系统可能无效吧。 这种情况下终端清缓存再重启就行:sudo kextcache -i /

Pinming avatar May 17 '20 05:05 Pinming

谢谢大佬。 还想问个问题😳,我用的1820a,iCloud和id登陆正常,但是appstore登陆不了(一直重复重复但是上不去),我那个是en2,这种情况需要内建网卡吗?

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020年5月17日 13:07 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

还有使用 tctien 十几天前的 clover 版 efi 安装后,笔记本上的触控板无效,大佬可以帮忙解决一下吗? 发自我的 iPhone … ------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020 年 5 月 12 日 19:48 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题:回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在 7590 关闭安全引导,OC 引导的话启动项里就压根没有。。 (#21) 那就奇怪了啊…… 不过也有可能后期我对 OC 做改动可能影响到 U 盘读取了…… 总之感谢反馈,我这边也再测试下。毕竟现在我自己没什么安装需求了可能也忽视了这个。 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

触控板一般而言是安装上去初次进入系统可能无效吧。 这种情况下终端清缓存再重启就行:sudo kextcache -i /

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 17 '20 16:05 1hdtpdc1

我重装了mac,然后再把原装网卡替换成1820a,自己就成en0了。😂

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020年5月17日 13:07 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

还有使用 tctien 十几天前的 clover 版 efi 安装后,笔记本上的触控板无效,大佬可以帮忙解决一下吗? 发自我的 iPhone … ------------------ 原始邮件 ------------------ 发件人: Pinming <[email protected]> 发送时间: 2020 年 5 月 12 日 19:48 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Author <[email protected]> 主题:回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在 7590 关闭安全引导,OC 引导的话启动项里就压根没有。。 (#21) 那就奇怪了啊…… 不过也有可能后期我对 OC 做改动可能影响到 U 盘读取了…… 总之感谢反馈,我这边也再测试下。毕竟现在我自己没什么安装需求了可能也忽视了这个。 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

触控板一般而言是安装上去初次进入系统可能无效吧。 这种情况下终端清缓存再重启就行:sudo kextcache -i /

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 18 '20 01:05 1hdtpdc1

@1hdtpdc1 网卡位置改en0不至于重装系统😂

ghost avatar May 20 '20 00:05 ghost

@1hdtpdc1 网卡位置改en0不至于重装系统😂

害,问题不大。主要是当时折腾了老半天有点烦躁,没想到重装系统反而是最快的解决方法😂

1hdtpdc1 avatar May 20 '20 00:05 1hdtpdc1

@1hdtpdc1 直接百度 "黑苹果 en0" 解决方法也挺简单

ghost avatar May 20 '20 00:05 ghost

我试了好多,各种替换之类的,都不行。因为我刚开始是插了一个usb网卡,它把那个en0占了。

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: oytian <[email protected]> 发送时间: 2020年5月20日 08:20 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Mention <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

@1hdtpdc1 直接百度 "黑苹果 en0" 解决方法也挺简单

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 20 '20 00:05 1hdtpdc1

我试了好多,各种替换之类的,都不行。因为我刚开始是插了一个 usb 网卡,它把那个 en0 占了。

修复 en0 问题可以参考这篇文章:https://blog.csdn.net/skykingf/article/details/40298543 。 App Store 无法正常使用的话建议使用 OpenCore Configurator 生成一组新的白果三码,加之 en0 修复后应该可以正常使用。 如果对 App Store / iMessage / Facetime 等有要求,不建议直接使用我 EFI 里的三码

Pinming avatar May 23 '20 07:05 Pinming

@Pinming 觉得可以在repo里面提一下这篇文章: https://zhuanlan.zhihu.com/p/117680791,感觉写得挺好的

ghost avatar May 23 '20 07:05 ghost

@Pinming 觉得可以在 repo 里面提一下这篇文章: https://zhuanlan.zhihu.com/p/117680791,感觉写得挺好的

我这边 5/30 可以回学校了,所以能测试网卡了。 待全部测试结束以后还会对 readme 做一次较大修改的。这篇文章我也会考虑加入。

Pinming avatar May 23 '20 07:05 Pinming

@Pinming 觉得可以在 repo 里面提一下这篇文章: https://zhuanlan.zhihu.com/p/117680791,感觉写得挺好的

我这边 5/30 可以回学校了,所以能测试网卡了。 待全部测试结束以后还会对 readme 做一次较大修改的。这篇文章我也会考虑加入。

@Pinming lol期待,现在又用回Win10系统了,感觉黑苹果目前在细节体验方面还是不够好

ghost avatar May 23 '20 07:05 ghost

@Pinming 觉得可以在 repo 里面提一下这篇文章: https://zhuanlan.zhihu.com/p/117680791,感觉写得挺好的

我这边 5/30 可以回学校了,所以能测试网卡了。 待全部测试结束以后还会对 readme 做一次较大修改的。这篇文章我也会考虑加入。

@Pinming lol 期待,现在又用回 Win10 系统了,感觉黑苹果目前在细节体验方面还是不够好

其实勉勉强强可以了…… 现在主要就是没独显没麦克风是大的硬伤 包括英特尔网卡过段时间搞定了应该也会舒服一些,其他软件上的其实都好解决😀

Pinming avatar May 23 '20 07:05 Pinming

@Pinming 😂可能是心理问题吧,觉得在黑苹果下面用着并没有win10流畅,可能是两个系统的动画不太一样。另外就是字体渲染的问题,我的是1080p屏幕,字体边缘总会有点发虚的感觉,没有win10下面看起来舒服,也可能是和网页的字体有关

ghost avatar May 23 '20 07:05 ghost

@Pinming 😂可能是心理问题吧,觉得在黑苹果下面用着并没有 win10 流畅,可能是两个系统的动画不太一样。另外就是字体渲染的问题,我的是 1080p 屏幕,字体边缘总会有点发虚的感觉,没有 win10 下面看起来舒服,也可能是和网页的字体有关

黑苹果还是得搭配 2K 或以上的屏幕体验会好一些……我用着 4K 反正是回不去了 2333333 Win10 1080 的屏幕缩放完以后字体渲染其实也还可以了

Pinming avatar May 23 '20 07:05 Pinming

@Pinming 🤣是啊,当初没有上低配有点后悔,前段时间还跑去问客服能不能升级屏幕 emmm

ghost avatar May 23 '20 07:05 ghost

问一下,你们用1820q的话tx速率是300还是867啊,我这跑的300,不知道怎么注入那个#a的代码😭

发自我的iPhone

------------------ 原始邮件 ------------------ 发件人: oytian <[email protected]> 发送时间: 2020年5月23日 15:16 收件人: Pinming/Dell-Inspiron-7590-Hackintosh-Opencore <[email protected]> 抄送: 1hdtpdc1 <[email protected]>, Mention <[email protected]> 主题: 回复:[Pinming/Dell-Inspiron-7590-Hackintosh-Opencore] 现在7590关闭安全引导,OC引导的话启动项里就压根没有。。 (#21)

@Pinming 🤣是啊,当初没有上低配有点后悔,前段时间还跑去问客服能不能升级屏幕 emmm

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

1hdtpdc1 avatar May 24 '20 02:05 1hdtpdc1

问一下,你们用1820q的话tx速率是300还是867啊,我这跑的300,不知道怎么注入那个#a的代码😭

@1hdtpdc1 虽然我自己还没有能够测试,但是你说 #a 这个地方的话, config.plist 中:将 NVRAM -> Add -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> boot-args 内的

#brcmfx-driver=2 #brcmfx-country=#a

改为:

brcmfx-driver=2 brcmfx-country=#a

就可以了啊。

Pinming avatar May 28 '20 10:05 Pinming

4k夏普的7590顶配有没有朋友用这个装成功的,我的搞不定,能不能帮忙,非常感谢,主要显卡驱动不了

ahoneyboy avatar Jul 01 '20 23:07 ahoneyboy