android-debug-cable-howto

android-debug-cable-howto copied to clipboard

Experiment with female-to-female breakout boards

16

thestinger mentioned to me that unfortunately the PCB has a nasty tendency to have to dangle off the phone with all the weight of the cables added to it, and...

Peter-Easton

Getting UART output, but no "console"

4

I was able to enable UART on my Pixel 2 XL and set up an adapter as described. I get plenty of UART output both in bootloader mode and when...

kjh96

what's the Baud rate of minicom ?

1

I use google pixel 3 XL . thank you

fallshuang

Tested on the Pixel 5

3

Just wanted to let you know this method also works on the Pixel 5! The only thing I changed was inverting the A8 and B8 pins (`A8 -- TX` and...

mrexodia

Trying this on Redmi Note 11

3

Hi, I have been trying this on my Redmi Note 11. I have tried 3 different usb-serial adapters (ft232, cp2102,pl2303). Also changed cable and flipped connection. Enabled these configs in...

daeiron

Hi thank you so much for this great DIY article but unfortunately, I can't find **USB 3.1 CM CF USB 3.1 Male To Female Passthrough Breakout Board - Fully Soldered**...

AafaaqAli

[discussion] Works on Pixel 8 Pro

1

Thanks for creating this guide Side note: this is not an "issue" per se, but since the discussion tab isn't enabled, I filed it as one. Any chance you want...

surlyhacker