AltSoftSerial

AltSoftSerial copied to clipboard

Add Support for ATMEGA328PB Please

2

### Description Describe your problem. Does not appear to have support for ATMEGA328PB. ### Steps To Reproduce Problem Please give detailed instructions needed for anyone to attempt to reproduce the...

maesoph

Implement Inverse flag to invert sense of RX and TX like SoftwareSerial

1

This pull request implements the inverse flag so that AltSoftSerial inverts the sense of RX and TX similar to the inverse flag in SoftwareSerial library. Unlike the earlier pull request...

fourstix

Needed 6-bit format and parity support. Tried PR #52, but did not work for me. Reworked and adjusted.

stattin42

Implement Inverse flag to invert sense of RX and TX like SoftwareSerial

2

As a user I need to reverse the sense of the RX and TX lines to communicate with a particular piece of hardware as in SoftwareSerial, but I also need...

fourstix

Support Request for Arduino Portenta

1

## Support Request for Arduino Portenta The new [Arduino Portenta](https://store.arduino.cc/usa/portenta-h7) has several UART's if using the [Breakout Board](https://store.arduino.cc/usa/portenta-breakout) but by itself it only has SerialUSB and Serial1 at D13, D14,...

hpssjellis

Remove "unused variables" warnings

5

Fixing #46.

szotsaki

Support for Teensy 4.0

2

### Description I am unable to compile any sketches that include against the Teensy 4.0 items I've purchased. ### Steps To Reproduce Problem I am using Arduino IDE 1.8.10 and...

GLBaxter

Support Arduino Nano Every

3

Is there a way to get it wokring with Arduino Nano Every?

harryberlin

added signal invert and mode selection (rx/tx)

2

bikemike

incompatible with nrf52 architecture Adafruit Feather nRF52 Bluefruit LE - nRF52832

1

Hi, I used arduino IDE to code nRF52832 ( https://www.adafruit.com/product/3406 ) when I wrote: #include AltSoftSerial myserial(15,16) I couldn't pass the compiler, and got following error msgs: WARNING: library AltSoftSerial...

dlnraja