PartialVolume
PartialVolume
Nearly forgot, the above legacy ISO is for 64bit systems, a 32bit version will follow once I've built the combined LegacyUEFI root.
It will check for write/read I/O errors and therefore bad sectors in the process of doing a wipe and verification. What it won't do is a non destructive read/write. I.e...
Once they are all verifying you can use the up and down arrow keys on the keyboard to move up and down the list of 40 drives to see the...
On the selection screen you would normally select a drive then press 'space' to enable it for [wipe] or [vrfy] then use down arrow to select next drive etc. As...
>But the throughput is very low when I do this I get around 600MB/s total and among 8 drives I get around 90MB which is very slow it takes 5mins...
The drives (assuming a WD5000AVDS) theoretical maximum sustained throughput is about 130MB/s, likely spec'ed at the begining of the disc. It's average sustained throughput will be less than this as...
>its around 500mb Can you clarify whether you mean you have 500Mb drives or you are getting throughput of 500Mb/s when you wipe one drive? The 128GB SSD will make...
If you leave nwipe at the drive selection window, i.e not wiping then ALT F2 to bring up the second virtual terminal. Type `nwipe --sync=0` then wipe a drive with...
As an example of what you might expect for the fastest hard drive (not SSD) that you can currently buy. The Seagate Exos 2x14 dual actuator has a sustained speed...