PartialVolume

What drives have you got in this system, fibre channel, SAS or SATA?

I removed a qlogic fibre channel driver from the latest version of ShredOS. Can you try the previous version of ShredOS and see if that recognises the drives. Just so...

The firmware for the bios? I don't know. I think the most likely reason at the moment is the missing cbfw-3.2.5.1.bin firmware file which is for QLogic Infiniband, SCSI, Fibre...

@Firminator `megaraid_sas` has been installed since `v2020.05.014_x86-64_0.31`. Regarding the message that appears during boot: ``` Cant locate firmware cbfw-3.2.5.1.bin Cant locate firmware cbfw-3.2.5.1.bin ``` Seems to be for the Qlogic...

@johnyoungatwork does state the SAS are configured as RAID 1 and 10 though, so maybe not in HBA mode. @johnyoungatwork Can you switch the raid controller to HBA mode?

I've ordered a PERC H710P so I'll get back to you once I've checked it out.

Could be a hardware problem. Before you start the wipe try switching to a virtual terminal ALT F2 and run `smartctl -a /dev/sda | more` What does it say about...

Not that it matters, as it has nothing to do with the problem but you didn't switch off the blanking pass. With the settings you chose, prng + blanking +...

Although its most likely a buggy i915 driver or a hardware related problem, I just want to confirm you are not inadvertently typing CONTROL S at any point during the...

sftp support has not been implemented yet. It will be available in the upcoming release.