PaddleStroke

The thing is that there are 2 ways to look at your drawing. Either Cylinder1 is 10mm in front of cylinder2, or cylinder2 is 10 mm behind cylinder1. In other...

@maxwxyz what do you think is the best solution for the problem ? There're two options : - Reverse min and max if min is more than max when the...

> Thanks for the input @sliptonic ! I agree that it should use the core selection state instead of tracking selection events itself. I was looking at how it's done...

Side note related to UI : - Can you put the old distance tool in a command group together with your tool? It's not very useful, but as it's doing...

@shaise are you willing to bring the fastener workbench in core assembly in the form of a toolbar concentrating functionality ?

@grubertechnic There is already a general insert tool that insert links. Can you please check it out to tell me if this is what you had in mind as a...

Ok so I suggest we add a 'insert fasterner' tool similar to the one in A4 (so using the Fasterner wb database). But to make it possible to customize/replace the...

This is a good question. Perhaps it is not really helpful afterall. What really matter is the JCS I guess.

@howie-j It is not working on my side. The joint is hidden after accepting it. But selecting it does not show it nor does anything. Only toggling the visibility of...

Also for distance joints, the distance could be writen along this line in the same style as sketcher dimensions