PSLLSP

ESPDUINO-32 doesn't mine when UART is not active

4

[ESPDUINO-32](https://www.cnx-software.com/2017/09/04/espduino-32-wemos-d1-r32-esp32-boards-support-some-arduino-uno-shields/) with UART HL-340 (1a86:7523), flashed with NerdMiner firmware 1.6.3, flashed with WebFlasher. Configured to mine at vkbit.com mining pool. Device has chip ESP-WROOM-32. Board has no **BOOT** button (that...

I have new toy, ESP-WROOM-32 module; it is ESP-WROOM-32 with UART CH9102X, it has micro-USB connector and module has 30 pins, 2 buttons (BOOT, EN) and two small LED diodes...

NerdMinerV2, fw 1.6.3 MAC address is not reported to serial console when NerdMiner is started. It is reported what is name of AP that NerdMiner will connect, IP address is...

Miner version is not sent to the mining pool

2

I updated my miner with firmware v1.6.3 but hashrate is still only about 55 kHps. This is for miner TTGO TDISPLAY v1.14. So, I am not sure if the miner...

public-pool.io, hashrate is not stable

7

`NerdMiner` connected to pool [public-pool.io](https://web.public-pool.io/) is not hashing at the highest possible speed, hashrate is not stable, it oscillates between zero and maximum. I was observing this issue for some...

Configuration with CURL?

2

I connected to http://192.168.4.1 at NerdMinerAP WiFi and I see that I can use some magic API, like http://192.168.4.1/wifisave or http://192.168.4.1/param but it is not documented; some parameters has to...

Daylight saving time not supported

3

`NerdMiner` supports TimeZone in configuration, it is an integer. This is the first issue, there are timezones with offset of 30 or 45 minutes, etc. [strange timezones](https://www.timeanddate.com/time/time-zones-interesting.html) To address this...

I observed at device T-Dongle-S3 that miner was reporting hashrate 0.00. I am not sure why, maybe stratum protocol of the mining pool was not compatible with `NerdMiner` firmware. I...

T-Dongle-S3: issues

2

Issues with device `T-Dongle-S3`. --- One button on device doesn't work as described in [README](https://github.com/BitMaker-hub/NerdMiner_v2/blob/master/README.md) ### One button devices: - One click > change screen. - Double click > change...

I would like to see one more field in configuration, to define TAG/ID/LABEL, just some ID that will be displayed on miner screen. This should be an optional parameter, default...