dependency conflicts

[chz816]

Hi!

Thank you for this wonderful paper and repo. I meet several dependency conflicts when I try to build the virtual environment.

pip install -r requirements.txt

It returns the following error:

ERROR: After October 2020 you may experience errors when installing or updating packages. This is because pip will change the way that it resolves dependency conflicts.

We recommend you use --use-feature=2020-resolver to test your packages with the new resolver before it becomes the default.

tensorboard 1.14.0 requires setuptools>=41.0.0, but you'll have setuptools 39.0.1 which is incompatible.
tensorflow-gpu 1.14.0 requires numpy<2.0,>=1.14.5, but you'll have numpy 1.14.2 which is incompatible.
thinc 6.10.3 requires wrapt<1.11.0,>=1.10.0, but you'll have wrapt 1.12.1 which is incompatible.
scipy 1.5.2 requires numpy>=1.14.5, but you'll have numpy 1.14.2 which is incompatible.
allennlp 1.0.0 requires spacy<2.3,>=2.1.0, but you'll have spacy 2.0.11 which is incompatible.

If I directly tried to run:

cd src
python run.py --segment --input_files ../data/rst/TRAINING/wsj_110*.out --result_dir ../data/results/

It gives us the following error messages:

ModuleNotFoundError: No module named 'allennlp.commands.elmo'

I believe this message is caused by the version of allennlp (based on https://stackoverflow.com/questions/62884591/modulenotfounderror-no-module-named-allennlp-commands-elmo).

Could you please give me more instructions on how to set up the virtual environment successfully? Thank you!

[chz816]

If I change the setting for allennlp in requirements.txt to:

tensorflow_gpu==1.14.0
spacy==2.0.11
allennlp==0.4.2
numpy==1.14.2

It returns the following message:

    ERROR: Command errored out with exit status 1:
     command: /home/rachelzheng/NeuralEDUSeg/venv/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-pkgni0ld/psycopg2/setup.py'"'"'; __file__='"'"'/tmp/pip-install-pkgni0ld/psycopg2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-1t6utkud
         cwd: /tmp/pip-install-pkgni0ld/psycopg2/
    Complete output (23 lines):
    running egg_info
    creating /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info
    writing /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/PKG-INFO
    writing dependency_links to /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/dependency_links.txt
    writing top-level names to /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/top_level.txt
    writing manifest file '/tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/SOURCES.txt'

    Error: pg_config executable not found.

    pg_config is required to build psycopg2 from source.  Please add the directory
    containing pg_config to the $PATH or specify the full executable path with the
    option:

        python setup.py build_ext --pg-config /path/to/pg_config build ...

    or with the pg_config option in 'setup.cfg'.

    If you prefer to avoid building psycopg2 from source, please install the PyPI
    'psycopg2-binary' package instead.

    For further information please check the 'doc/src/install.rst' file (also at
    <https://www.psycopg.org/docs/install.html>).

    ----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.

[Anuradha25]

Facing the same error. To avoid this error I tried installing a higher version of allennlp==1.0.0.. but in that case I am getting an error - ModuleNotFoundError: No module named 'allennlp.commands.elmo' Any help would be appreciated.

[Anuradha25]

If I change the setting for allennlp in requirements.txt to:

tensorflow_gpu==1.14.0
spacy==2.0.11
allennlp==0.4.2
numpy==1.14.2

It returns the following message:

    ERROR: Command errored out with exit status 1:
     command: /home/rachelzheng/NeuralEDUSeg/venv/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-pkgni0ld/psycopg2/setup.py'"'"'; __file__='"'"'/tmp/pip-install-pkgni0ld/psycopg2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-1t6utkud
         cwd: /tmp/pip-install-pkgni0ld/psycopg2/
    Complete output (23 lines):
    running egg_info
    creating /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info
    writing /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/PKG-INFO
    writing dependency_links to /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/dependency_links.txt
    writing top-level names to /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/top_level.txt
    writing manifest file '/tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/SOURCES.txt'

    Error: pg_config executable not found.

    pg_config is required to build psycopg2 from source.  Please add the directory
    containing pg_config to the $PATH or specify the full executable path with the
    option:

        python setup.py build_ext --pg-config /path/to/pg_config build ...

    or with the pg_config option in 'setup.cfg'.

    If you prefer to avoid building psycopg2 from source, please install the PyPI
    'psycopg2-binary' package instead.

    For further information please check the 'doc/src/install.rst' file (also at
    <https://www.psycopg.org/docs/install.html>).

    ----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.

Hey,

I installed psycopg2-binary==2.8.6 and psycopg2==2.8.6 and I could install allennlp==0.4.2 after that. You made need to manually install torch==0.3.1 before installing allennlp. You may need to refer to https://github.com/allenai/allennlp#installing-via-pip for allennlp installation.

The python version is 3.6. Hope this solves the issue.

[Junzizaiji]

如果我将 in 的设置更改为：allennlp``requirements.txt

tensorflow_gpu==1.14.0
spacy==2.0.11
allennlp==0.4.2
numpy==1.14.2

它返回以下消息：

    ERROR: Command errored out with exit status 1:
     command: /home/rachelzheng/NeuralEDUSeg/venv/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-pkgni0ld/psycopg2/setup.py'"'"'; __file__='"'"'/tmp/pip-install-pkgni0ld/psycopg2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-1t6utkud
         cwd: /tmp/pip-install-pkgni0ld/psycopg2/
    Complete output (23 lines):
    running egg_info
    creating /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info
    writing /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/PKG-INFO
    writing dependency_links to /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/dependency_links.txt
    writing top-level names to /tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/top_level.txt
    writing manifest file '/tmp/pip-pip-egg-info-1t6utkud/psycopg2.egg-info/SOURCES.txt'

    Error: pg_config executable not found.

    pg_config is required to build psycopg2 from source.  Please add the directory
    containing pg_config to the $PATH or specify the full executable path with the
    option:

        python setup.py build_ext --pg-config /path/to/pg_config build ...

    or with the pg_config option in 'setup.cfg'.

    If you prefer to avoid building psycopg2 from source, please install the PyPI
    'psycopg2-binary' package instead.

    For further information please check the 'doc/src/install.rst' file (also at
    <https://www.psycopg.org/docs/install.html>).

    ----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.

嘿

我安装了 psycopg2-binary==2.8.6 和 psycopg2==2.8.6，之后我可以安装 allennlp==0.4.2。在安装 allennlp 之前，您需要手动安装 torch==0.3.1。您可能需要参考 allennlp 安装 https://github.com/allenai/allennlp#installing-via-pip。

python版本是3.6。希望这能解决问题。

Hello, what is your graphics card driver, my computer using torch0.3.1 will report an error。