PA3CCE

Error when compiling script from latest source code

2

When I try to compile the script made from the latest souce code, the compiling aborts with the following errormessage : File "C:\Program Fles WindowsApps\PythonSoftwareFoundation.python.3.9 3.9.3568.0 x64 qbz5n2kfra8p\lib\ast.py", line 50,...

Fontsize in version 0.4.0

1

I`m experimenting with Nanovna-saver 0.4.0, sofar all looks fine, however the fontsize in the UI is too small for my old eyes :-((. A bigger font, or better a user...

NanoVNA-Saver 0.4.0 scaling

2

Hi, When I meaure eg an attenuator of 20dB and the setting of the data-axis to "automatic", the trace is in the upper half of the display and has a...

Version 0.4.0 , version display

1

I am using NanoVNA-Saver V 0.4.0 on my Windows 11 PC. and the LiteVNA device. After pressing the "Manage" button the popped up window shows under "status" :" Nano VNA-V2"...

NanoVNA-Saver 0.3.8 pre " List index out of range"

8

After posting the previous message " division by 0 error" I restarted NanoVNA-Saver and tried again to do the same calibration, 1MHz to 2GHz, 10 Segments, 401 datapoints, 100 Hz...

NanoVNA-Saver 0.3.10-pre (0.3.9) with NanoVNA-H4 Datapoints setting

2

**Describe the bug** ============= Datapoints setting for NanoVNA-H4 Firmware V 1.0.65 problematic. **To Reproduce** Steps to reproduce the behavior: ===================== 1. Go to "Manage"en select ""Datapoints" One can select 11,...

NanoVNA-Saver 3.8 pre division by 0

1

This morning I started a fresh calibration in NanoVNA-Saver 0.3.8 pre, 1MHz to 2GHz, 10 Segm,ents, 401 datapoints, 100 Hz Bandwidth. The "short" caalibration went well, but while running the...

Default bandwidth setting

2

**Is your feature request related to a problem? Please describe.** NanoVNA-Saver starts with bandwidth default set to 1000 Hz, after "Connect to device" it resets to **2000** **Hz,** this is...

Wierd reaction of scrolling in frequency displays

1

**Describe the bug** When the Mouse pointer is **over** a frequencydisplay scrolling the mousewheel causes X **and** Y axis of the display to go up and down and X-axis going...

MJissing things in some displays

5

**Describe the bug** In some S11 and S21 displays some items are missing.. **To Reproduce** Steps to reproduce the behavior: 1. Load and start NanoVNA-Saver 3.6 2. Click on "Display...