open-zwave
open-zwave copied to clipboard
OpenZWave
Danalock zwave behavior
unlike "old" openzwave, current versions won't open my danalock zwave lock if it's already in unlock state. if the state is locked unlock working. It is bother me because i have a fixed door handle so i don't need to lock my door all the times.
I have the same problem - in oz 1.4 it works without problems - now it would not open if its in unlock state
Can also confirm same problem for Danalock in 1.6. Works with 1.4. But for me it about half of the times Open Zwave crash when starting up. Last statuses messages is from the Danalock and then it crash. When it starts up it show as completed. But not possible to lock/unlock as mentioned above. What is strange is that it update correct status when I unlock and lock manually on the lock itself.
Sorry I forgot to save the log. I had to get back to 1.4 as fast as possible to get the house up running again.
My Danalock is working fine with 1.6 After inclusion, set the gateway in "heal node"-mode and the activate inclusion mode on the lock. Try several times if its not working, also you can try the same with "refresh config params".
My Danalock is working fine with 1.6 After inclusion, set the gateway in "heal node"-mode and the activate inclusion mode on the lock. Try several times if its not working, also you can try the same with "refresh config params".
Can you unlock the door if it's already unlocked?
My Danalock is working fine with 1.6 After inclusion, set the gateway in "heal node"-mode and the activate inclusion mode on the lock. Try several times if its not working, also you can try the same with "refresh config params".
Can you unlock the door if it's already unlocked?
Yes.