Drehsensor links/rechts vs. Drehsensor B/C

[Thorlogy]

Describe the bug There should be a uniform designation of the rotary sensor within the Open Roberta lab. In the sensor view, the rotation sensor is labeled left and right. In the block category with B and C.

Its not directly a bug. But it confused the user.

To Reproduce Steps to reproduce the behavior:

1. Go to 'Open Roberta Lab'
2. Click on 'SIM' and on Sensor View.
3. Clock also on the category "Sensor"
4. See error

Expected behavior Both sensor label should have the same description.

Screenshots

Device information

• Browser: chorme

[bjost2s]

The information "left" and "right" is easy to remove, but the idea was to give the user a combined information from programming blocks and configuration. The simulation only works with the differential drive so "left" and "right" are always available. Whereas the programming block might be used with another configuration (and without simulation) where "left" and "right" is not available.

[Thorlogy]

You are totally right. I haven not seen that the notation is: C Drehsensor links B Drehsensor rechts

So all needed information are there. It might be necessary to consider writing B before C....