sbc-groundstations
sbc-groundstations copied to clipboard
OpenIPC
sbc-groundstations
Hi, I was flash the image to orangepi 5 plus and follow the guide ([Release/orangepi5plus-v1.2.0](https://github.com/OpenIPC/sbc-groundstations/releases/tag/orangepi5plus-v1.2.0)) to gen 2 keys: drone.key and gs.key. Next step I transfer your gs.key to OrangePi...
I tested `RTL8814AU` and `RTL8812BU` wifi card with the driver from [morrownr](https://github.com/morrownr) on my radxa zero 3w, They are all working fine. Is it possible add `RTL8814AU`,`RTL8812BU`,`RTL8812EU` driver to groundstations?...
Radxa 3w and 3e are composed of the same soc. Is the image of 3w compatible with 3e?
* Add radxa zero 3e to official support (it is currently supported after testing) * Add more network card chip drivers, such as RTL8812EU, RTL8814AU, RTL8812BU, RTL8812CU, RTL8731BU * Add...
A small suggestion, pins 27 and 28 on the Radxa Zero 3 can be used as USB pins to communicate with the network card. When designing buttons or other functions,...
I read on the Radxa Datasheet that the HDMI out officially only supports up to 1080p60. Do people still get reliable 1080p120 output or are there issues?
I ran into an issue setting up the image for the Radxa 3W sbc that would not recognize the internal wifi card and it was showing up as the unmanaged...
On a 2gb 16gb emmc model running script,resizefs.sh does nothing, I am unable to locate it in the scripts folder (might be worth detail commands to switch to this if...
I think it might be useful to add a double-window "VR mode" for people who want to make goggles using small HDMI displays, something that already exists in the PixelPilot...
