firmware
firmware copied to clipboard
OpenIPC
Alternative IP Camera firmware from an open community
Hey guys, I just flashed my 50H20L_S39 using the coupler file. It is now booting the OpenIPC and it is recognizing the sensor “sc2035” by default…. This sensor is not...
I've flashed an `IPG5020A-H-V1.0` board with `OpenIPC master+e4d73334, 2022-08-30` but isn't getting any video when I try the preview tab in the web interface. Majestic starts outputting this continuously when...
After update on Fulhan the system is rebooting after 10-30 seconds on start. I did try without success: - change mem=32M +/-2M - disabled all majestic services In previous version...
T31ZX成功烧录OpenIPC后想使用WIFI但WIFI加载不了WIFI驱动  z7682inf.ko是在交叉编译好的MT7682驱动并且能在T31ZX中运行的，但不知道怎么在OpenIPC加载不了，insmod不行，modprobe也不行，并且我在modules.dep添加了z7682inf.ko  ，还是不行，希望大佬能帮我解决问题
Flashed the current available release for my SoC (Hi3518EV100) - whilst it boots okay, I am unable to get network access in uboot or OpenIPC. printenv in uboot, ifconfig in...
Hi, this platform might be interesting to add support for since it is not listed It is used in cameras like dlink dcs-6100 / aoni e96kr7f (odm), some tuya cams,......
You can get 41.24 fps on gk7205v210 with sensor sc5239s (which openipc labels sc223a), not only 30 fps. Set `fps: 45` in /etc/majestic.yaml and `Isp_FrameRate=45` in /etc/sensors/sc223a_i2c_1080p.ini. majestic output: ```...
I've got camera board from here: https://aliexpress.ru/item/1005005471371172.html Added Wi-Fi support (RTL8733BU driver build, USB device setup). Allow initializing eth0 even if Wi-Fi running
Hello there! I wanted to upgrade the firmware trough Majestic on my gk7205v210 camera. Originally it was installed with the following version: ``` # cat /etc/*release NAME=Buildroot VERSION=-g570c995a-dirty ID=buildroot VERSION_ID=2021.02.12...
