firmware gk7201v300

Hello!

First of all congratulations for your very nice firmware solution.

I would like to know how, if possible at all, would be for me to write or adapt an openipc firmware to this goke cpu , which is currently listed as not supported.

I have now root access in my little camera, and I am wondering if I repack your rootfs in this default kernel it would boot at all. But, i'm aware it's probably not that easy, because they seem to have their crc verification going on, and also their hardware watchdog, so i'm afraid it would just break the device. Also i'm not quite sure your streaming would work with these drivers, but I would just try to copy the existing default drivers and use them in your rootfs.

So, what do you think? And also I would like to know why it's currently not supported, is it too obscure as hardware? I found it a very cheap, less than 10 dollars, useful little camera.

Thanks

Oct 24 '25 20:10 cyrax50000

subject too difficult, not cool enough or no real interest ?

Nov 07 '25 16:11 cyrax50000

@cyrax50000 How you get root access to GK7201 ? Can you share with me ?

Dec 13 '25 05:12 imtoanle

I have two cameras with this chip with different firmware versions. One I upgraded and ports 80 and 554 are no longer open.

But I would like to have ONVIF and RTPs (554) working 100%. My electronics are basic, but I have no problem opening the equipment.

Device version IPC_GK7201V300_G2-WR-V_S38 Firmware V5.00.R20.00949U5.10000 80/tcp open http 554/tcp open rtsp 23000/tcp open inovaport1 34567/tcp open dhanalakshmi Upgraded version Firmware V5.03.C01.000949U5.1000 34567/tcp open dhanalakshmi

Dec 16 '25 10:12 voodoopt