device-mjsxj02hl
device-mjsxj02hl copied to clipboard
OpenIPC
The process was OK but i didn' get a shutter click
Log from HiTool and ScreenShot
What wrong ?
```
USB channels were closed successfully.
##################################################### ---- 10%
################################################### ---- 20%
################################################### ---- 30%
################################################### ---- 40%
################################################### ---- 50%
################################################### ---- 60%
################################################### ---- 70%
################################################### ---- 80%
################################################### ---- 90%
################################################### ---- 100%
Boot download completed!
start download process.
Boot started successfully!
Send command: getinfo version version: U-Boot 2016.11-g72db7cf-dirty EOT
Send command: getinfo bootmode spi EOT
Send command: sf probe 0 EOT
Send command: getinfo spi Block:64KB Chip:16MB*1 ID:0x1C 0x70 0x18 Name:"EN25QH128A" EOT
Send command: sf probe 0 EOT
Send command: sf erase 0x0 0x40000
Erasing at 0x10000 -- 25% complete. Erasing at 0x20000 -- 50% complete. Erasing at 0x30000 -- 75% complete. Erasing at 0x40000 -- 100% complete. SF: 262144 bytes @ 0x0 Erased: OK EOT
Send command: sf write 0x41000000 0x0 0x40000 device 0 offset 0x0, size 0x40000
Writing at 0x10000 -- 25% complete. Writing at 0x20000 -- 50% complete. Writing at 0x30000 -- 75% complete. Writing at 0x40000 -- 100% complete. SF: 262144 bytes @ 0x0 Written: EOT
Send command: mw.b 0x41000000 0xFF 0x1f0000 EOT
Send command: Downloading File : uImage.hi3518ev300
[Download File by usb] file = C:\Users\Aviran&Dor\Downloads\openipc.hi3518ev300-nor-lite\uImage.hi3518ev300 address = 0x41000000 fileLength = 1999576 B
done
Send command: sf probe 0 EOT
Send command: sf erase 0x50000 0x200000
Erasing at 0x60000 -- 3% complete. Erasing at 0x70000 -- 6% complete. Erasing at 0x80000 -- 9% complete. Erasing at 0x90000 -- 12% complete. Erasing at 0xa0000 -- 15% complete. Erasing at 0xb0000 -- 18% complete.EOT
Send command: sf write 0x41000000 0x50000 0x1f0000 device 0 offset 0x50000, size 0x1f0000
Writing at 0x60000 -- 3% complete. Writing at 0x70000 -- 6% complete. Writing at 0x80000 -- 9% complete. Writing at 0x90000 -- 12% complete. Writing at 0xa0000 -- 16% complete.EOT Partition kernel burnt successfully!
Send command: mw.b 0x41000000 0xFF 0x500000 EOT
Send command: Downloading File : rootfs.squashfs.hi3518ev300
[Download File by usb] file = C:\Users\Aviran&Dor\Downloads\openipc.hi3518ev300-nor-lite\rootfs.squashfs.hi3518ev300 address = 0x41000000 fileLength = 5230592 B
done
Send command: sf probe 0 EOT
Send command: sf erase 0x250000 0x500000
Erasing at 0x260000 -- 1% complete. Erasing at 0x270000 -- 2% complete. Erasing at 0x280000 -- 3% complete. Erasing at 0x290000 -- 5% complete. Erasing at 0x2a0000 -- 6% complete. Erasing at 0x2b0000 -- 7% complete.EOT
Send command: sf write 0x41000000 0x250000 0x500000 device 0 offset 0x250000, size 0x500000
Writing at 0x260000 -- 1% complete. Writing at 0x270000 -- 2% complete. Writing at 0x280000 -- 3% complete. Writing at 0x290000 -- 5% complete. Writing at 0x2a0000 -- 6% complete.EOT Partition rootfs burnt successfully!
Send command: reset reset success! Partition burnt completed!
Hi, I have the same problem.
- Zadig => success message
- HiTool => success message
- SD Card => no shutter click, no conection to wifi
Is there a particular way to create partitions (i use a 8Mo SDCCard, i use windows disk manager, i create FAT32 partitions) ? to copy the contents of directory flash ?
A part of the solution is here : https://github.com/OpenIPC/firmware/issues/859
- shutter click ok
- blue light ok
- but no connection to wifi => i don't understand where i write SSID...
RTFM : https://github.com/OpenIPC/firmware/blob/master/ATTENTION.md I downloaded on Telegram the openipc.hi3518ev300-nor-lite.tgz release published on 01/05/2023. Everything is ok now.
Hello, Is the problem fixed or device owner are stuck to 01/05/2023 version with no possible upgrade ?
@lehibou30 do you still have the image around? It has been removed from telegram alas
