burn

burn copied to clipboard

unlock gk7605v100

17

Hi, original u-boot is password locked, so I run u-boot by loading it with burn: `./burn --chip gk7205v300 --file=../u-boot-gk7605v100-universal.bin --break` I get promt: `OpenIPC #` then I can do all...

prchal

Hi3518ev200 - burn is not detecting it.. or totally dead camera?

4

Hi! I replaced the firmware sucessfully with openIPC, but due to some issue with wifi (wrong wlan0 driver) networking was apparently messed up.. so I decide to burn again the...

Extreme79

I used burn to flash the full openipc firmware image using the precompiled instructions found on the website. When I enter reset it goes back to the old bootloader which...

Ocean572

unlock hi3516ev200 "failedATA"

3

This is what happens with a windows laptop FTDI or a raspberrypi3 UART ``` PS C:\work\burn> C:\Python311\python.exe burn --chip hi3516ev200 --file=u-boot-hi3516ev200-universal.bin -p COM5 --break Trying open COM5 Welcome to boot-mode...

FMode

MacOS compatibility

6

loading problem ``` % /usr/local/bin/python3 ./burn --debug --port /dev/tty.usbserial-1 --chip hi3518ev200 --file=u-boot-hi3518ev200-universal.bin --break      Trying open /dev/tty.usbserial-1 Welcome to boot-mode {'name': 'hi3516cv200', 'DDRSTEP0': [4, 224, 45, 229, 36, 0, 159, 229,...

ialexlog

Add decoding script

dimerr