DSO5202P on MacOS

[WilixLead]

I follow all steps in https://github.com/OpenHantek/openhantek/blob/master/docs/build.md#apple-macosx
But got this error:

Device connected via usb

[bikermikem]

I have a working build for a DSO6022BE but you must have the usb drivers installed on your Mac which they would appear not to be on your system. Admittedly it took me over a week to get this working but then I’m not a programer and the instructions, as usual, assume user is knowledgeable about such things. Also info for building seems to be a bit spread out over the OpenHantek website. I’m going to try to put together all the steps I did and post it somewhere useful. But for the moment the binary I built, the terminal output for it, and a screenshot & a video of screen are at

https://www.dropbox.com/sh/ide1nsg8yjmi2ra/AABkzzN9Wtwxu42td6KbxUDna?dl=0 https://www.dropbox.com/sh/ide1nsg8yjmi2ra/AABkzzN9Wtwxu42td6KbxUDna?dl=0

On 4 Jul 2018, at 11:20, Dmitry Aloyan [email protected] wrote:

I follow all steps in https://github.com/OpenHantek/openhantek/blob/master/docs/build.md#apple-macosx https://github.com/OpenHantek/openhantek/blob/master/docs/build.md#apple-macosx But got this error: https://user-images.githubusercontent.com/9950995/42271680-8ee91734-7f8c-11e8-838c-24d6e7164a32.png Device connected via usb

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/OpenHantek/openhantek/issues/237, or mute the thread https://github.com/notifications/unsubscribe-auth/ABrtkXNX8vX9_PngiH2mNdhazm9VwnySks5uDJb-gaJpZM4VCVZp.

[WilixLead]

Where get this driver? My DSO5202P listed on system like this:

Gadget Serial v2.4@14100000  <class AppleUSBDevice, id 0x1000522e9, registered, matched, active, busy 0 (1 ms), retain 12>
        {
          "sessionID" = 557095611963799
          "iManufacturer" = 1
          "bNumConfigurations" = 1
          "idProduct" = 20570
          "bcdDevice" = 9264
          "Bus Power Available" = 250
          "USB Address" = 4
          "bMaxPacketSize0" = 64
          "iProduct" = 2
          "iSerialNumber" = 0
          "bDeviceClass" = 255
          "Built-In" = No
          "locationID" = 336592896
          "bDeviceSubClass" = 0
          "bcdUSB" = 512
          "USB Product Name" = "Gadget Serial v2.4"
          "PortNum" = 1
          "non-removable" = "no"
          "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle"}
          "bDeviceProtocol" = 0
          "IOUserClientClass" = "IOUSBDeviceUserClientV2"
          "IOPowerManagement" = {"DevicePowerState"=0,"CurrentPowerState"=3,"CapabilityFlags"=65536,"MaxPowerState"=4,"DriverPowerState"=3}
          "Device Speed" = 2
          "USB Vendor Name" = "Linux 3.2.35 with s3c-hsudc"
          "idVendor" = 1183
          "IOGeneralInterest" = "IOCommand is not serializable"
          "IOClassNameOverride" = "IOUSBDevice"
        }

May be need update firmware? But for what? At this moment I use latest from hantek official website

[bikermikem]

I'm assuming you followed the build instructions re BREW. The driver is built into the OpenHantek program as far as I know. I'm not sure your model of scope is supported. See screenshots. The 5202P is not shown, just the 5200 & 5200A. You might want to be careful, see: https://www.eevblog.com/forum/testgear/dso5202p-autoset/.

[WilixLead]

In github description I see "DSO52xx Series" in supported list, but looks like it is not true :(

[bikermikem]

Well hopefully the coding gods will take note and try and fix this.

[bikermikem]

You might want to look at https://github.com/OpenHantek/openhantek/blob/master/docs/adddevice.md