openevse_esp32_firmware

openevse_esp32_firmware copied to clipboard

Monitor all temperature sensors

2

Sets `_temps[EVSE_MONITOR_TEMP_MONITOR]` and `_temps[EVSE_MONITOR_TEMP_MAX]` using the temperature sensor with the highest reading, rather than always using the first sensor with a valid reading.

kimble4

Add filter to current shaper output.

3

As I described in https://github.com/OpenEVSE/openevse_esp32_firmware/issues/901, I've been having problems with instabilities in the current shaper. From looking at the issues, it appears that others have as well. I can replicate...

lutorm

Shapper simulator

1

jeremypoulter

TFT display doesn't show correct max or actual charging current

4

The old text display would show the actual current while charging. The new TFT display does not, but it would be nice if it did. The max charging current that...

lutorm

Oscillating setpoint in Export mode when BOTH solar production and grid powers are published via MQTT

6

Hello, first and foremost thanks for this GREAT project, both the hardware and the software are fantastic! It seems that there is an issue in the divert control system, where...

jamarju

I'm not sure why this is happening, but while experimenting with the EVSE's temperature limiting, I noticed that if the EVSE reduces the pilot current due to high temperature, this...

kimble4

RTC timezone issue - Should the EVSE's clock be in UTC?

2

For clarity: I have the new TFT WiFi/Display module. This has no RTC. As I sometimes want to use my OpenEVSE for portable charging where NTP isn't necessarily available, and...

kimble4

Bump espressif32 from 6.8.1 to 6.9.0

1

Bump espressif32 from 6.8.1 to 6.9.0

openevse-bot

Bump ArduinoJson from 6.20.1 to 7.2.0

1

Bump ArduinoJson from 6.20.1 to 7.2.0

openevse-bot

Problem Updating Firmware

6

I can't install the latest firmware on the station. I open 'firmware update' window and try both options mentioned below: 1. automatic update via direct download from github - it...

Matol