OpenAstroTracker

OpenAstroTracker copied to clipboard

If Digitial Level is installed allow calibration and visualization of level

ClutchplateDude

Use common 608 bearings

1

It would be great to use the common 608 bearings instead of the 12mm ID bearings required now. The price and availability are much better. I modified the stl files...

typerat

The Part Chooser seems to be outdated from the seemingly new file structure of the download file.

1

I have been using v1.5.1 to collect all the printed parts required for my configuration and the part chooser is pointing to .rar files that dont seem to exist anymore...

jackomyers

What version of Solidworks was used ?

4

I'm looking at tweaking some of the parts to better suit my needs and I wonder what version of Solidworks was used to create the part files? Both year and...

demondev

I have found that for lower latitude version (20deg) of the OAT, the RA motor physically clashes with the [MKS bottom mounted case](https://wiki.openastrotech.com/en/OpenAstroTracker/Enclosures/Bottom_Mounted_MKS_Case). As of now I only know of...

saurav-attri

I encountered a frustrating issue when trying to print [04_rollmount left_30°_v6_2020base_TI.STL](https://github.com/OpenAstroTech/OpenAstroTracker/blob/master/STL/30deg/04_rollmount%20left_30%C2%B0_v6_2020base_TI.STL) where Klipper would crash with an SD card error message when attempting to print. I chased the issue for...

daniel-gallagher