Main Frame Assembly step 12 incorrectly lists dimension as 30 ½”

[tobymurray]

The parts list in the main frame assembly list:

Punched angle  2 x 31 ½”   4 x 30”  4 x 24”  7 x 18”  4 x 6”  2 x 1”

Step 12 in the Main Frame Assembly is as follows:

12. Use the 2 30 ½” punched angle lengths as the vertical posts on the outermost electronics  chamber side, making sure that the end of the length with the cut through a punched hole is  towards the top. 

There are no 30 ½” pieces, this should be 31 ½”.

[sp4ghet]

@tobymurray Can you submit a PR with your fix? Thanks.