3d-files

3d-files copied to clipboard

The display flex ribbon extends more than the case allows for

2

The Light Edition watch I have doesn't fit (without squeezing) into the case. I measure that the case allows for a 38.8mm total dimension from the very top of the...

MarkJeronimus

I have now been wearing the watch with my printed case for around three months. I had to make some slight tweaks to the parts, for example making the text...

xythobuz

Adding my case finally

1

Here is my case I made months ago with both STL and STEP formats

ejzeronimo

0.8mm pcb round battery 20mm watch strap design

2

Hi, it would be great to see a design for a 0.8mm pcb with a round battery and a standard 20mm watch strap. I think this particular combo isn't represented...

smb1985

The STL files have 'merged' components, as opposed to 'union-ed'. Since STL is just a 'bunch of separate triangles', all geometrical clues about this situation are lost, and this causes...

MarkJeronimus

No STL files for light edition PCB 1mm

1

I bought two light editions from Lilygo via AliExpress, and the PCB they use is 1.0mm, not 0.8 or 1.6mm. I could probably squeeze the module into the case but...

MarkJeronimus

Per case based readme

1

I think there sould be a per case based readme with: What you need (Screws, Glue, ... )? Some print tipps? Short assembly? ( For example where does the glass...

xasz

Redo models in FreeCAD?

1

I think for something like this it might be worth it to redo the 3D models in a parametric modeler like FreeCAD, as it seems like the best tool for...

Electro707

Hello all, I was thinking of using the https://github.com/Open-Smartwatch/3d-files/tree/master/case-light-1.6mm-pcb-20mm-straps STLs to produce an aluminium case but I am a bit concerned about it interfering with the BT and WIFI signals....

jessp01