rtl_433_ESP Fine Offset Electronics WS90 weather station support

Current Situation

Is it possible to create support for Fine Offset Electronics WS90 weather station?

Proposed Change

Is it possible to create support for Fine Offset Electronics WS90 weather station?

Additional Context

No response

Oct 24 '23 21:10 Oleg-Sob

@Oleg-Sob About every 6 to 12 months I do refresh of the device decoders, and this will be included then. You can close this here, and track it via this issue - https://github.com/NorthernMan54/rtl_433_ESP/issues/111

Nov 16 '23 14:11 NorthernMan54

@NorthernMan54 how s the progress？Please update😭we urgently need your update😭

May 22 '24 10:05 balaboooot

Would love to see support for WS90 too!

Sep 05 '24 18:09 ruimarinho

@Oleg-Sob can you re-open this issue? I think @NorthernMan54 intended for this issue to remain open to track progress, his comment above links to this very same issue. The issue he asked you to close was actually the one over in the upstream rtl_433 repo.

Nov 24 '24 17:11 claudobahn

I refreshed the device decoders from rtl_433 24.10, maybe this is resolved?

Nov 30 '24 02:11 NorthernMan54

There is no way to check yet.

Nov 30 '24 10:11 Oleg-Sob

I refreshed the device decoders from rtl_433 24.10, maybe this is resolved?

I still don't see the WS-90 device. Firmware OMG_lilygo_rtl_433_ESP v1.8.1

Feb 12 '25 11:02 Oleg-Sob

@Oleg-Sob and all - how are you using the latest rtl_433_ESP, and which frequency are your WS90s?

Feb 12 '25 14:02 DigiH

I use WS-90 at 433 MHz I have WT-0124 Pool and Nexus-TH sensors, they work fine.

Feb 12 '25 15:02 Oleg-Sob

You need to test with the development version, only which currently includes the new decoders rtl_433.24.10, mentioned by @NorthernMan54 above, as OpenMQTTGateway 1.8.1 does not actually have the WS90 decoder included yet.

Make sure to instal the lilygo-rtl_433-fsk binary on the development web upload page.

https://docs.openmqttgateway.com/dev/upload/web-install.html

Feb 12 '25 15:02 DigiH

Installed lilygo-rtl_433-fsk, Fineoffset-WS90 appeared, but does not see other sensors. What did I do wrong?

Feb 12 '25 16:02 Oleg-Sob

What did I do wrong?

Nothing, the WS90 is an FSK modulated sensor, that is why you had to install the lilygo-rtl_433-fsk binary, while your other sensors, WT-0124 Pool and Nexus-TH sensors, are OOK modulated sensors, which require the OOK build lilygo-rtl_433 binary.

I also have two LilyGos for my OOK and FSK sensors.

If this is even possible as programatically switchable sometime in the future I really don't know, as also mentioned here

https://github.com/NorthernMan54/rtl_433_ESP/issues/167

Feb 12 '25 16:02 DigiH

I see, thanks for the information.

Feb 12 '25 16:02 Oleg-Sob