node-red-contrib-homebridge-automation
node-red-contrib-homebridge-automation copied to clipboard
Published
20 hours ago •
NorthernMan54
NorthernMan54
Event logs are displayed as error
I'm running node-red on pm2, on my Raspberry Pi Zero. Its runs on a SD card. So I want to eliminate logs as much as possible. But I see on pm2 error logs and I see lots of events logs present there.
Here are the logs
/root/.pm2/logs/node-red-error.log last 15 lines:
1|node-red | 2021-08-20T03:52:35.230Z hapNodeRed Controlled 0E:46:A1:58:31:C9 -> { On: 1 }
1|node-red | 2021-08-20T03:52:36.462Z hapNodeJSClient Events [{"host":"192.168.68.220","port":51154,"deviceID":"0E:46:A1:58:31:C9","aid":8,"iid":10,"value":1,"status":true}]
1|node-red | 2021-08-20T03:52:36.467Z hapNodeRed hbEvent Light Trigger {
1|node-red | host: '192.168.68.220',
1|node-red | port: 51154,
1|node-red | deviceID: '0E:46:A1:58:31:C9',
1|node-red | aid: 8,
1|node-red | iid: 10,
1|node-red | value: 1,
1|node-red | status: true
1|node-red | }
1|node-red | 2021-08-20T03:52:36.499Z hapNodeRed _status request: Tube light - Lightbulb -> 0E:46:A1:58:31:C9:?id=3.10,3.11,3.12 ->
1|node-red | 2021-08-20T03:52:36.590Z hapNodeRed hbStatus received: "Tube light - Lightbulb" = {"characteristics":[{"aid":3,"iid":10,"value":1},{"aid":3,"iid":11,"value":5},{"aid":3,"iid":12,"value":232}]}
1|node-red | 2021-08-20T03:52:36.617Z hapNodeRed Control 0E:46:A1:58:31:C9 -> {"characteristics":[{"aid":3,"iid":10,"value":0}]}
1|node-red | 2021-08-20T03:52:36.999Z hapNodeRed Controlled 0E:46:A1:58:31:C9 -> { On: 0 }
1|node-red | 2021-08-20T03:53:14.319Z hapNodeJSClient Events [{"host":"192.168.68.220","port":51154,"deviceID":"0E:46:A1:58:31:C9","aid":9,"iid":10,"value":1,"status":true}]
1|node-red | 2021-08-20T03:53:14.324Z hapNodeRed hbEvent Fan Trigger {
1|node-red | host: '192.168.68.220',
1|node-red | port: 51154,
1|node-red | deviceID: '0E:46:A1:58:31:C9',
1|node-red | aid: 9,
1|node-red | iid: 10,
1|node-red | value: 1,
1|node-red | status: true
1|node-red | }
1|node-red | 2021-08-20T03:53:14.411Z hapNodeRed _status request: Fan - Switch -> 0E:46:A1:58:31:C9:?id=15.11,15.12,15.13,15.14,15.10 ->
1|node-red | 2021-08-20T03:53:14.491Z hapNodeRed hbStatus received: "Fan - Switch" = {"characteristics":[{"aid":15,"iid":11,"value":1},{"aid":15,"iid":12,"value":19},{"aid":15,"iid":13,"value":0.2},{"aid":15,"iid":14,"value":237},{"aid":15,"iid":10,"value":1}]}
1|node-red | 2021-08-20T03:53:14.526Z hapNodeRed Control 0E:46:A1:58:31:C9 -> {"characteristics":[{"aid":15,"iid":10,"value":0}]}
1|node-red | 2021-08-20T03:53:16.339Z hapNodeRed Controlled 0E:46:A1:58:31:C9 -> { On: 0 }
1|node-red | 2021-08-20T03:53:16.999Z hapNodeJSClient Events [{"host":"192.168.68.220","port":51154,"deviceID":"0E:46:A1:58:31:C9","aid":9,"iid":10,"value":0,"status":true}]
1|node-red | 2021-08-20T03:53:17.000Z hapNodeRed hbEvent Fan Trigger {
1|node-red | host: '192.168.68.220',
1|node-red | port: 51154,
1|node-red | deviceID: '0E:46:A1:58:31:C9',
1|node-red | aid: 9,
1|node-red | iid: 10,
1|node-red | value: 0,
1|node-red | status: true
1|node-red | }
1|node-red | 2021-08-20T03:53:17.077Z hapNodeRed _status request: Fan - Switch -> 0E:46:A1:58:31:C9:?id=15.11,15.12,15.13,15.14,15.10 ->
1|node-red | 2021-08-20T03:53:17.143Z hapNodeRed hbStatus received: "Fan - Switch" = {"characteristics":[{"aid":15,"iid":11,"value":1},{"aid":15,"iid":12,"value":19},{"aid":15,"iid":13,"value":0.2},{"aid":15,"iid":14,"value":237},{"aid":15,"iid":10,"value":0}]}
1|node-red | 2021-08-20T03:53:17.184Z hapNodeRed Control 0E:46:A1:58:31:C9 -> {"characteristics":[{"aid":15,"iid":10,"value":1}]}
1|node-red | 2021-08-20T03:53:17.454Z hapNodeRed Controlled 0E:46:A1:58:31:C9 -> { On: 1 }
1|node-red | 2021-08-20T03:53:28.116Z hapNodeJSClient Events [{"host":"192.168.68.220","port":51154,"deviceID":"0E:46:A1:58:31:C9","aid":8,"iid":14,"value":236,"status":true}]
1|node-red | 2021-08-20T03:53:28.134Z hapNodeRed hbEvent Light Trigger {
1|node-red | host: '192.168.68.220',
1|node-red | port: 51154,
1|node-red | deviceID: '0E:46:A1:58:31:C9',
1|node-red | aid: 8,
1|node-red | iid: 14,
1|node-red | value: 236,
1|node-red | status: true
1|node-red | }
1|node-red | 2021-08-20T03:53:28.921Z hapNodeJSClient Events [{"host":"192.168.68.220","port":51154,"deviceID":"0E:46:A1:58:31:C9","aid":14,"iid":14,"value":237,"status":true}]
1|node-red | 2021-08-20T03:53:28.932Z hapNodeRed hbEvent Light {
1|node-red | host: '192.168.68.220',
1|node-red | port: 51154,
1|node-red | deviceID: '0E:46:A1:58:31:C9',
1|node-red | aid: 14,
1|node-red | iid: 14,
1|node-red | value: 237,
1|node-red | status: true
1|node-red | }
1|node-red | 2021-08-20T03:53:30.260Z hapNodeJSClient Events [{"host":"192.168.68.220","port":51154,"deviceID":"0E:46:A1:58:31:C9","aid":9,"iid":14,"value":236,"status":true}]
1|node-red | 2021-08-20T03:53:30.275Z hapNodeRed hbEvent Fan Trigger {
1|node-red | host: '192.168.68.220',
1|node-red | port: 51154,
1|node-red | deviceID: '0E:46:A1:58:31:C9',
1|node-red | aid: 9,
1|node-red | iid: 14,
1|node-red | value: 236,
1|node-red | status: true
1|node-red | }
These are all events logs, can we not log them as errors?
Do you have the DEBUG option enabled? These message appear to be DEBUG messages from the package.
On Aug 20, 2021, at 12:55 AM, Kavin Varnan @.***> wrote:
hbEvent
No I don't run node-red on debug mode. Here is my pm2 script.
module.exports = {
apps : [{
name : "Node Red",
script : "node-red",
node_args: '--max-old-space-size=128',
out_file: "/var/log/nrout.log",
error_file: "/var/log/nrerr.log"
}]
}
I also did check your code. https://github.com/NorthernMan54/node-red-contrib-homebridge-automation/blob/master/HAP-NodeRed.js#L183. Its getting printed as debug log.
But still I'm seeing the logs as error on pm2 🤔
This is definitely something in your PM2 config and setup, did you try googling it for a fix? Somewhere in the environment that your starting node-red from DEBUG is being enabled.
Also this is the debug package, https://www.npmjs.com/package/debug, which does use console.error