nixpkgs
nixpkgs copied to clipboard
klipper: unstable-2022-09-16 -> unstable-2022-09-25
Automatic update generated by nixpkgs-update tools. This update was made based on information from passthru.updateScript.
meta.description for klipper is: "The Klipper 3D printer firmware"
meta.homepage for klipper is: "https://github.com/KevinOConnor/klipper"
meta.changelog for klipper is: ""
Updates performed
- Ran passthru.UpdateScript
To inspect upstream changes
Impact
Checks done (click to expand)
- built on NixOS
- The tests defined in
passthru.tests
, if any, passed - found unstable-2022-09-23 in filename of file in /nix/store/d0ndsg6i89mngqqgwqhd1bz6gplmikh8-klipper-unstable-2022-09-23
Rebuild report (if merged into master) (click to expand)
4 total rebuild path(s)
4 package rebuild(s)
First fifty rebuilds by attrpath
klipper
klipper-firmware
klipper-flash
klipper-genconf
Instructions to test this update (click to expand)
Either download from Cachix:
nix-store -r /nix/store/d0ndsg6i89mngqqgwqhd1bz6gplmikh8-klipper-unstable-2022-09-23 \
--option binary-caches 'https://cache.nixos.org/ https://nix-community.cachix.org/' \
--option trusted-public-keys '
nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs=
cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY=
'
(The Cachix cache is only trusted for this store-path realization.)
For the Cachix download to work, your user must be in the trusted-users
list or you can use sudo
since root is effectively trusted.
Or, build yourself:
nix-build -A klipper https://github.com/r-ryantm/nixpkgs/archive/676465ffd435024bdb10dcf150dc56830a939212.tar.gz
After you've downloaded or built it, look at the files and if there are any, run the binaries:
ls -la /nix/store/d0ndsg6i89mngqqgwqhd1bz6gplmikh8-klipper-unstable-2022-09-23
ls -la /nix/store/d0ndsg6i89mngqqgwqhd1bz6gplmikh8-klipper-unstable-2022-09-23/bin
Pre-merge build results
We have automatically built all packages that will get rebuilt due to this change.
This gives evidence on whether the upgrade will break dependent packages. Note sometimes packages show up as failed to build independent of the change, simply because they are already broken on the target branch.
Result of nixpkgs-review
run on x86_64-linux 1
4 packages built:
- klipper
- klipper-firmware
- klipper-flash
- klipper-genconf
Maintainer pings
cc @lovesegfault @zhaofengli @cab404 for testing.
Automatic update generated by nixpkgs-update tools. This update was made based on information from passthru.updateScript.
meta.description for klipper is: "The Klipper 3D printer firmware"
meta.homepage for klipper is: "https://github.com/KevinOConnor/klipper"
meta.changelog for klipper is: ""
Updates performed
- Ran passthru.UpdateScript
To inspect upstream changes
Impact
Checks done (click to expand)
- built on NixOS
- The tests defined in
passthru.tests
, if any, passed - found unstable-2022-09-25 in filename of file in /nix/store/b1an7p2ss4hnlpfrp21yrdw742h3dmgg-klipper-unstable-2022-09-25
Rebuild report (if merged into master) (click to expand)
4 total rebuild path(s)
4 package rebuild(s)
First fifty rebuilds by attrpath
klipper
klipper-firmware
klipper-flash
klipper-genconf
Instructions to test this update (click to expand)
Either download from Cachix:
nix-store -r /nix/store/b1an7p2ss4hnlpfrp21yrdw742h3dmgg-klipper-unstable-2022-09-25 \
--option binary-caches 'https://cache.nixos.org/ https://nix-community.cachix.org/' \
--option trusted-public-keys '
nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs=
cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY=
'
(The Cachix cache is only trusted for this store-path realization.)
For the Cachix download to work, your user must be in the trusted-users
list or you can use sudo
since root is effectively trusted.
Or, build yourself:
nix-build -A klipper https://github.com/r-ryantm/nixpkgs/archive/574e9a35c94e608ddeafd38bf4c1aa178aeb1d6a.tar.gz
After you've downloaded or built it, look at the files and if there are any, run the binaries:
ls -la /nix/store/b1an7p2ss4hnlpfrp21yrdw742h3dmgg-klipper-unstable-2022-09-25
ls -la /nix/store/b1an7p2ss4hnlpfrp21yrdw742h3dmgg-klipper-unstable-2022-09-25/bin
Pre-merge build results
We have automatically built all packages that will get rebuilt due to this change.
This gives evidence on whether the upgrade will break dependent packages. Note sometimes packages show up as failed to build independent of the change, simply because they are already broken on the target branch.
Result of nixpkgs-review
run on x86_64-linux 1
4 packages built:
- klipper
- klipper-firmware
- klipper-flash
- klipper-genconf
Maintainer pings
cc @lovesegfault @zhaofengli @cab404 for testing.
Automatic update generated by nixpkgs-update tools. This update was made based on information from passthru.updateScript.
meta.description for klipper is: "The Klipper 3D printer firmware"
meta.homepage for klipper is: "https://github.com/KevinOConnor/klipper"
meta.changelog for klipper is: ""
Updates performed
- Ran passthru.UpdateScript
To inspect upstream changes
Impact
Checks done (click to expand)
- built on NixOS
- The tests defined in
passthru.tests
, if any, passed - found unstable-2022-09-30 in filename of file in /nix/store/hz4km7psdkxjfdgmczzydqhqz92pgjq2-klipper-unstable-2022-09-30
Rebuild report (if merged into master) (click to expand)
4 total rebuild path(s)
4 package rebuild(s)
First fifty rebuilds by attrpath
klipper
klipper-firmware
klipper-flash
klipper-genconf
Instructions to test this update (click to expand)
Either download from Cachix:
nix-store -r /nix/store/hz4km7psdkxjfdgmczzydqhqz92pgjq2-klipper-unstable-2022-09-30 \
--option binary-caches 'https://cache.nixos.org/ https://nix-community.cachix.org/' \
--option trusted-public-keys '
nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs=
cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY=
'
(The Cachix cache is only trusted for this store-path realization.)
For the Cachix download to work, your user must be in the trusted-users
list or you can use sudo
since root is effectively trusted.
Or, build yourself:
nix-build -A klipper https://github.com/r-ryantm/nixpkgs/archive/9ea2d02ae4bb1b2a116299917f8822aa6e683d62.tar.gz
After you've downloaded or built it, look at the files and if there are any, run the binaries:
ls -la /nix/store/hz4km7psdkxjfdgmczzydqhqz92pgjq2-klipper-unstable-2022-09-30
ls -la /nix/store/hz4km7psdkxjfdgmczzydqhqz92pgjq2-klipper-unstable-2022-09-30/bin
Pre-merge build results
We have automatically built all packages that will get rebuilt due to this change.
This gives evidence on whether the upgrade will break dependent packages. Note sometimes packages show up as failed to build independent of the change, simply because they are already broken on the target branch.
Result of nixpkgs-review
run on x86_64-linux 1
4 packages built:
- klipper
- klipper-firmware
- klipper-flash
- klipper-genconf
Maintainer pings
cc @lovesegfault @zhaofengli @cab404 for testing.
Automatic update generated by nixpkgs-update tools. This update was made based on information from passthru.updateScript.
meta.description for klipper is: "The Klipper 3D printer firmware"
meta.homepage for klipper is: "https://github.com/KevinOConnor/klipper"
meta.changelog for klipper is: ""
Updates performed
- Ran passthru.UpdateScript
To inspect upstream changes
Impact
Checks done (click to expand)
- built on NixOS
- The tests defined in
passthru.tests
, if any, passed - found unstable-2022-10-06 in filename of file in /nix/store/xdvq9bh7c5sj7fp6lnzi32ssghqnv73q-klipper-unstable-2022-10-06
Rebuild report (if merged into master) (click to expand)
4 total rebuild path(s)
4 package rebuild(s)
First fifty rebuilds by attrpath
klipper
klipper-firmware
klipper-flash
klipper-genconf
Instructions to test this update (click to expand)
Either download from Cachix:
nix-store -r /nix/store/xdvq9bh7c5sj7fp6lnzi32ssghqnv73q-klipper-unstable-2022-10-06 \
--option binary-caches 'https://cache.nixos.org/ https://nix-community.cachix.org/' \
--option trusted-public-keys '
nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs=
cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY=
'
(The Cachix cache is only trusted for this store-path realization.)
For the Cachix download to work, your user must be in the trusted-users
list or you can use sudo
since root is effectively trusted.
Or, build yourself:
nix-build -A klipper https://github.com/r-ryantm/nixpkgs/archive/bc4eb490b741f10b585e413e462ce4e942b6e7ca.tar.gz
After you've downloaded or built it, look at the files and if there are any, run the binaries:
ls -la /nix/store/xdvq9bh7c5sj7fp6lnzi32ssghqnv73q-klipper-unstable-2022-10-06
ls -la /nix/store/xdvq9bh7c5sj7fp6lnzi32ssghqnv73q-klipper-unstable-2022-10-06/bin
Pre-merge build results
We have automatically built all packages that will get rebuilt due to this change.
This gives evidence on whether the upgrade will break dependent packages. Note sometimes packages show up as failed to build independent of the change, simply because they are already broken on the target branch.
Result of nixpkgs-review
run on x86_64-linux 1
4 packages built:
- klipper
- klipper-firmware
- klipper-flash
- klipper-genconf
Maintainer pings
cc @lovesegfault @zhaofengli @cab404 for testing.