Christian I. Nilsson
Christian I. Nilsson
Normally the watchdog process only checks that a process is alive by pid. In the case of screenly it is a bit more complicated because of the secondary processes, and...
@axel-b I will try to be short and then read what you wrote a few more times ;) But it really sounds like a slave mode is needed and, however...
Also verify that you are using the latest version of iPXE. (And post the version number to verify)
Thank you for your contribution, and attempts at making iPXE better. Despite the noise ;) Official stance as I remember it is "iPXE builds on Linux, BSD not supported" Adding...
try imgstat after console --picture without --keep Then try it with keep. I think you will find it does exactly what it says it does. But the issue might exist...
Could we recommend that any use of console is used with imgfetch to verify that the correct image is used. (And deprecate keep?) Of course we should avoid breaking changes,...
I fully agree that symlinks supports needs to be resolved. (causing issues for me as well, as you said there already are open issues about it) Symlinks are stored as...
@georgyo project to do arch mirroring: https://github.com/VictorBjelkholm/arch-mirror and has its own workaround for symlinks. There is relevant discussions in that project and linked documentation as well. I fully agree with...
Same way as #21 But also discussed in #10 and #14
You can also run the Pro Micro on 3.3V, lower the internal frequency, disconnect 5v from usb, and instead power it from the Pi? To be clear, I do not...