nginx-proxy-manager
nginx-proxy-manager copied to clipboard
Published
20 hours ago •
NginxProxyManager
NginxProxyManager
Dependency Build Errors for Cloudflare DNS Challenge
Checklist
- Have you pulled and found the error with
jc21/nginx-proxy-manager:latestdocker image?- Yes
- Are you sure you're not using someone else's docker image?
- Yes
- Have you searched for similar issues (both open and closed)?
- Yes
Describe the bug
The tl;dr version is that installing cloudflare and certbot-dns-cloudflare fail because Python.h is missing because python3-dev is missing from the container image. This is closely related and even possibly a duplicate of #1955 although that issue is DuckDNS related rather than CloudFlare but the dependencies and root cause at least seem the same.
Nginx Proxy Manager Version
v2.9.18
To Reproduce Steps to reproduce the behavior:
- Add new SSL certificate
- Enter domain name
- Enter email address for LetsEncrypt
- Enable Use a DNS Challenge
- Select Cloudflare as DNS Provider
- Add Cloudflare API token credentials,
dns_cloudflare_api_token=<redacted> - Enable I Agree To LetsEncrypt TOS
- Click on Save
nginx_proxy_manager | dns_cloudflare_api_token=[redacted] > '/etc/letsencrypt/credentials/credentials-1' && chmod 600 '/etc/letsencrypt/credentials/credentials-1' && pip install certbot-dns-cloudflare==$(certbot --version | grep -Eo '[0-9](\.[0-9]+)+') cloudflare && certbot certonly --config "/etc/letsencrypt.ini" --cert-name "npm-1" --agree-tos --email "[redacted]" --domains "[redacted]" --authenticator dns-cloudflare --dns-cloudflare-credentials "/etc/letsencrypt/credentials/credentials-1"
nginx_proxy_manager | [5/24/2022] [1:30:10 PM] [Nginx ] › ℹ info Reloading Nginx
nginx_proxy_manager | [5/24/2022] [1:30:10 PM] [Express ] › ⚠ warning Command failed: pip install certbot-dns-cloudflare==$(certbot --version | grep -Eo '[0-9](\.[0-9]+)+') cloudflare
nginx_proxy_manager | error: subprocess-exited-with-error
nginx_proxy_manager |
nginx_proxy_manager | × pip subprocess to install build dependencies did not run successfully.
nginx_proxy_manager | │ exit code: 1
nginx_proxy_manager | ╰─> [124 lines of output]
nginx_proxy_manager | Collecting setuptools!=60.9.0,>=40.6.0
nginx_proxy_manager | Using cached setuptools-62.3.2-py3-none-any.whl (1.2 MB)
nginx_proxy_manager | Collecting wheel
nginx_proxy_manager | Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB)
nginx_proxy_manager | Collecting cffi>=1.12
nginx_proxy_manager | Downloading cffi-1.15.0.tar.gz (484 kB)
nginx_proxy_manager | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 484.1/484.1 KB 6.8 MB/s eta 0:00:00
nginx_proxy_manager | Preparing metadata (setup.py): started
nginx_proxy_manager | Preparing metadata (setup.py): finished with status 'done'
nginx_proxy_manager | Collecting setuptools-rust>=0.11.4
nginx_proxy_manager | Downloading setuptools_rust-1.3.0-py3-none-any.whl (21 kB)
nginx_proxy_manager | Collecting pycparser
nginx_proxy_manager | Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB)
nginx_proxy_manager | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 KB 5.2 MB/s eta 0:00:00
nginx_proxy_manager | Collecting semantic-version<3,>=2.8.2
nginx_proxy_manager | Downloading semantic_version-2.9.0-py2.py3-none-any.whl (15 kB)
nginx_proxy_manager | Collecting typing-extensions>=3.7.4.3
nginx_proxy_manager | Downloading typing_extensions-4.2.0-py3-none-any.whl (24 kB)
nginx_proxy_manager | Building wheels for collected packages: cffi
nginx_proxy_manager | Building wheel for cffi (setup.py): started
nginx_proxy_manager | Building wheel for cffi (setup.py): finished with status 'error'
nginx_proxy_manager | error: subprocess-exited-with-error
nginx_proxy_manager |
nginx_proxy_manager | × python setup.py bdist_wheel did not run successfully.
nginx_proxy_manager | │ exit code: 1
nginx_proxy_manager | ╰─> [36 lines of output]
nginx_proxy_manager | running bdist_wheel
nginx_proxy_manager | running build
nginx_proxy_manager | running build_py
nginx_proxy_manager | creating build
nginx_proxy_manager | creating build/lib.linux-armv7l-3.7
nginx_proxy_manager | creating build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | running build_ext
nginx_proxy_manager | building '_cffi_backend' extension
nginx_proxy_manager | creating build/temp.linux-armv7l-3.7
nginx_proxy_manager | creating build/temp.linux-armv7l-3.7/c
nginx_proxy_manager | arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
nginx_proxy_manager | c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
nginx_proxy_manager | #include <Python.h>
nginx_proxy_manager | ^~~~~~~~~~
nginx_proxy_manager | compilation terminated.
nginx_proxy_manager | error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
nginx_proxy_manager | [end of output]
nginx_proxy_manager |
nginx_proxy_manager | note: This error originates from a subprocess, and is likely not a problem with pip.
nginx_proxy_manager | ERROR: Failed building wheel for cffi
nginx_proxy_manager | Running setup.py clean for cffi
nginx_proxy_manager | Failed to build cffi
nginx_proxy_manager | Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi
nginx_proxy_manager | Running setup.py install for cffi: started
nginx_proxy_manager | Running setup.py install for cffi: finished with status 'error'
nginx_proxy_manager | error: subprocess-exited-with-error
nginx_proxy_manager |
nginx_proxy_manager | × Running setup.py install for cffi did not run successfully.
nginx_proxy_manager | │ exit code: 1
nginx_proxy_manager | ╰─> [36 lines of output]
nginx_proxy_manager | running install
nginx_proxy_manager | running build
nginx_proxy_manager | running build_py
nginx_proxy_manager | creating build
nginx_proxy_manager | creating build/lib.linux-armv7l-3.7
nginx_proxy_manager | creating build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
nginx_proxy_manager | running build_ext
nginx_proxy_manager | building '_cffi_backend' extension
nginx_proxy_manager | creating build/temp.linux-armv7l-3.7
nginx_proxy_manager | creating build/temp.linux-armv7l-3.7/c
nginx_proxy_manager | arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
nginx_proxy_manager | c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
nginx_proxy_manager | #include <Python.h>
nginx_proxy_manager | ^~~~~~~~~~
nginx_proxy_manager | compilation terminated.
nginx_proxy_manager | error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
nginx_proxy_manager | [end of output]
nginx_proxy_manager |
nginx_proxy_manager | note: This error originates from a subprocess, and is likely not a problem with pip.
nginx_proxy_manager | error: legacy-install-failure
nginx_proxy_manager |
nginx_proxy_manager | × Encountered error while trying to install package.
nginx_proxy_manager | ╰─> cffi
nginx_proxy_manager |
nginx_proxy_manager | note: This is an issue with the package mentioned above, not pip.
nginx_proxy_manager | hint: See above for output from the failure.
nginx_proxy_manager | WARNING: You are using pip version 22.0.4; however, version 22.1.1 is available.
nginx_proxy_manager | You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
nginx_proxy_manager | [end of output]
nginx_proxy_manager |
nginx_proxy_manager | note: This error originates from a subprocess, and is likely not a problem with pip.
nginx_proxy_manager | error: subprocess-exited-with-error
nginx_proxy_manager |
nginx_proxy_manager | × pip subprocess to install build dependencies did not run successfully.
nginx_proxy_manager | │ exit code: 1
nginx_proxy_manager | ╰─> See above for output.
nginx_proxy_manager |
nginx_proxy_manager | note: This error originates from a subprocess, and is likely not a problem with pip.
nginx_proxy_manager | WARNING: You are using pip version 22.0.4; however, version 22.1.1 is available.
nginx_proxy_manager | You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
nginx_proxy_manager |
Expected behavior
An SSL certificate to be generated via Cloudflare's DNS challenge
Screenshots
Operating System
- Raspberry Pi 4 Model B Rev 1.4
- Raspbian GNU/Linux 10 (buster)
- Docker version 20.10.12, build e91ed57
- docker-compose version 1.29.2, build unknown
Additional context
Workaround ...
docker exec -it nginx_proxy_manager /bin/bash
apt update
apt-get install -y build-essential libssl-dev libffi-dev python3-dev cargo
pip install certbot-dns-cloudflare==$(/usr/bin/certbot --version | grep -Eo '[0-9](\.[0-9]+)+') cloudflare
Be prepared with much ☕ as the build of the wheel for cryptography takes a while, at least on an RPi
After completion of the dependencies install, issuing SSL certs works and all is good
I have the same issue with OVH dns-challenge (and same environment Rpi4, docker and NPM version) and same trace.
the workaround worked for me (adapted for ovh)
docker exec -it nginx_proxy_manager /bin/bash
apt update
apt-get install -y build-essential libssl-dev libffi-dev python3-dev cargo
pip install certbot-dns-ovh==$(/usr/bin/certbot --version | grep -Eo '[0-9](\.[0-9]+)+') ovh
I have the same issue. Besides, I also couldn't install cryptography without updating the pip and setuptools, as shown in the error message below.
Workaround:
pip install pip setuptools --upgrade
IMO, it will be nice to have the certbots included in the image, as it requires lots of time to build and install otherwise.
Error message:
Collecting cryptography>=2.5.0
Using cached cryptography-37.0.4.tar.gz (585 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... error
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [29 lines of output]
=============================DEBUG ASSISTANCE==========================
If you are seeing an error here please try the following to
successfully install cryptography:
Upgrade to the latest pip and try again. This will fix errors for most
users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip
=============================DEBUG ASSISTANCE==========================
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
main()
File "/usr/local/lib/python3.7/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "/usr/local/lib/python3.7/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
return hook(config_settings)
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 155, in get_requires_for_build_wheel
config_settings, requirements=['wheel'])
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 135, in _get_build_requires
self.run_setup()
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 150, in run_setup
exec(compile(code, __file__, 'exec'), locals())
File "setup.py", line 14, in <module>
from setuptools_rust import RustExtension
File "/tmp/pip-build-env-4n8eryhe/overlay/lib/python3.7/site-packages/setuptools_rust/__init__.py", line 1, in <module>
from .build import build_rust
File "/tmp/pip-build-env-4n8eryhe/overlay/lib/python3.7/site-packages/setuptools_rust/build.py", line 20, in <module>
from setuptools.command.build import build as CommandBuild # type: ignore[import]
ModuleNotFoundError: No module named 'setuptools.command.build'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
I followed all above steps to get Cloudflare DNS challange working but get another new error while installing dependencies. Whats going on and who can help me further?
Why isn't this been solved in the Docker image already? There is no new version released since months....
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 58.8/58.8 kB 2.8 MB/s eta 0:00:00
Collecting six
Downloading six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting cffi>=1.12
Using cached cffi-1.15.1-cp37-cp37m-linux_armv7l.whl
Collecting zope.event
Downloading zope.event-4.5.0-py2.py3-none-any.whl (6.8 kB)
Collecting zope.hookable>=4.2.0
Downloading zope.hookable-5.2.tar.gz (24 kB)
Preparing metadata (setup.py) ... done
Collecting pycparser
Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
Building wheels for collected packages: cloudflare, pyyaml, configobj, cryptography, zope.interface, zope.hookable
Building wheel for cloudflare (setup.py) ... done
Created wheel for cloudflare: filename=cloudflare-2.10.1-py2.py3-none-any.whl size=67149 sha256=217f9dc11eb544ab3dbe84c0d63161bc328c7685ea79db0ac38ae663805ed4f2
Stored in directory: /root/.cache/pip/wheels/6c/4a/e7/54f880c649a67173001a212818b2ebd41128688473714c4aaa
Building wheel for pyyaml (pyproject.toml) ... done
Created wheel for pyyaml: filename=PyYAML-6.0-cp37-cp37m-linux_armv7l.whl size=45335 sha256=7b97945d1b1b1631642f0b33d4e49b7a310954bb9d543e7c92f13475f80c6073
Stored in directory: /root/.cache/pip/wheels/ca/e8/5c/5bdf13545e93ea6fda886afab27e2faecc419e84bf870c2623
Building wheel for configobj (setup.py) ... done
Created wheel for configobj: filename=configobj-5.0.6-py3-none-any.whl size=34528 sha256=6209099ae765467fc76c8fcade542f0a9037caf655bc97e59162f0e062042ede
Stored in directory: /root/.cache/pip/wheels/0d/c4/19/13d74440f2a571841db6b6e0a273694327498884dafb9cf978
Building wheel for cryptography (pyproject.toml) ... error
error: subprocess-exited-with-error
× Building wheel for cryptography (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [179 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-armv7l-cpython-37
creating build/lib.linux-armv7l-cpython-37/cryptography
copying src/cryptography/fernet.py -> build/lib.linux-armv7l-cpython-37/cryptography
copying src/cryptography/utils.py -> build/lib.linux-armv7l-cpython-37/cryptography
copying src/cryptography/__about__.py -> build/lib.linux-armv7l-cpython-37/cryptography
copying src/cryptography/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography
copying src/cryptography/exceptions.py -> build/lib.linux-armv7l-cpython-37/cryptography
creating build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/name.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/certificate_transparency.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/ocsp.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/general_name.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/base.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/extensions.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/oid.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
copying src/cryptography/x509/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat
copying src/cryptography/hazmat/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat
copying src/cryptography/hazmat/_oid.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings
copying src/cryptography/hazmat/bindings/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/_serialization.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/keywrap.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/_cipheralgorithm.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/hmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/hashes.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/_asymmetric.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/poly1305.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/cmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/constant_time.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
copying src/cryptography/hazmat/primitives/padding.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends
copying src/cryptography/hazmat/backends/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl
copying src/cryptography/hazmat/bindings/openssl/binding.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl
copying src/cryptography/hazmat/bindings/openssl/_conditional.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl
copying src/cryptography/hazmat/bindings/openssl/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/pkcs12.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/pkcs7.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/base.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/ssh.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization
copying src/cryptography/hazmat/primitives/serialization/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/rsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/x448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/ed448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/utils.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/ec.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/dh.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/ed25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/types.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/padding.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/dsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
copying src/cryptography/hazmat/primitives/asymmetric/x25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/pbkdf2.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/hkdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/concatkdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/x963kdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/kbkdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
copying src/cryptography/hazmat/primitives/kdf/scrypt.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/algorithms.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/modes.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/base.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/aead.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers
copying src/cryptography/hazmat/primitives/ciphers/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor
copying src/cryptography/hazmat/primitives/twofactor/hotp.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor
copying src/cryptography/hazmat/primitives/twofactor/totp.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor
copying src/cryptography/hazmat/primitives/twofactor/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/rsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/x448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ed448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/hmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/hashes.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/utils.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ec.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/dh.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ed25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/x509.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/poly1305.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/backend.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/cmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/ciphers.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/decode_asn1.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/aead.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/dsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
copying src/cryptography/hazmat/backends/openssl/x25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl
running egg_info
writing src/cryptography.egg-info/PKG-INFO
writing dependency_links to src/cryptography.egg-info/dependency_links.txt
writing requirements to src/cryptography.egg-info/requires.txt
writing top-level names to src/cryptography.egg-info/top_level.txt
reading manifest file 'src/cryptography.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
no previously-included directories found matching 'docs/_build'
warning: no previously-included files found matching 'vectors'
warning: no previously-included files matching '*' found under directory 'vectors'
warning: no previously-included files matching '*' found under directory '.github'
warning: no previously-included files found matching 'release.py'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching 'dev-requirements.txt'
warning: no previously-included files found matching 'tox.ini'
warning: no previously-included files found matching 'mypy.ini'
warning: no previously-included files matching '*' found under directory '.circleci'
adding license file 'LICENSE'
adding license file 'LICENSE.APACHE'
adding license file 'LICENSE.BSD'
adding license file 'LICENSE.PSF'
writing manifest file 'src/cryptography.egg-info/SOURCES.txt'
copying src/cryptography/py.typed -> build/lib.linux-armv7l-cpython-37/cryptography
copying src/cryptography/hazmat/bindings/_openssl.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings
creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/__init__.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/asn1.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/ocsp.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/x509.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust
running build_ext
running build_rust
/usr/local/lib/python3.7/dist-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning: Installing 'cryptography.hazmat.bindings._rust' as data is deprecated, please list it in `packages`.
!!
############################
# Package would be ignored #
############################
Python recognizes 'cryptography.hazmat.bindings._rust' as an importable package,
but it is not listed in the `packages` configuration of setuptools.
'cryptography.hazmat.bindings._rust' has been automatically added to the distribution only
because it may contain data files, but this behavior is likely to change
in future versions of setuptools (and therefore is considered deprecated).
Please make sure that 'cryptography.hazmat.bindings._rust' is included as a package by using
the `packages` configuration field or the proper discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" and "data files" on setuptools
documentation page.
!!
check.warn(importable)
=============================DEBUG ASSISTANCE=============================
If you are seeing a compilation error please try the following steps to
successfully install cryptography:
1) Upgrade to the latest pip and try again. This will fix errors for most
users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip
2) Read https://cryptography.io/en/latest/installation/ for specific
instructions for your platform.
3) Check our frequently asked questions for more information:
https://cryptography.io/en/latest/faq/
4) Ensure you have a recent Rust toolchain installed:
https://cryptography.io/en/latest/installation/#rust
Python: 3.7.3
platform: Linux-5.15.61-v7l+-armv7l-with-debian-10.12
pip: 22.2.2
setuptools: 65.3.0
setuptools_rust: 1.5.1
rustc: 1.41.1
=============================DEBUG ASSISTANCE=============================
error: Rust 1.41.1 does not match extension requirement >=1.48.0
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for cryptography
Building wheel for zope.interface (setup.py) ... done
Created wheel for zope.interface: filename=zope.interface-5.4.0-cp37-cp37m-linux_armv7l.whl size=223442 sha256=b3d4f275141cb4d76f97b2748004c972109290286cd678d49d2bc87337e3f480
Stored in directory: /root/.cache/pip/wheels/f8/5c/3e/b5145fe8a9350e5ba1c2b70f6dfb9e9b2f9406d9d74385b671
Building wheel for zope.hookable (setup.py) ... done
Created wheel for zope.hookable: filename=zope.hookable-5.2-cp37-cp37m-linux_armv7l.whl size=25980 sha256=8e96c653a055cc71ec614de6470f8557a3b1c8782055dc5b1a5c5f4fab7ce6ea
Stored in directory: /root/.cache/pip/wheels/dc/2f/08/590e0ea8c24f526762c5349f4eb4f196bb8dd335b57fb50e0e
Successfully built cloudflare pyyaml configobj zope.interface zope.hookable
Failed to build cryptography
ERROR: Could not build wheels for cryptography, which is required to install pyproject.toml-based projects
I followed all above steps to get Cloudflare DNS challange working but get another new error while installing dependencies. Whats going on and who can help me further?
Why isn't this been solved in the Docker image already? There is no new version released since months....
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 58.8/58.8 kB 2.8 MB/s eta 0:00:00 Collecting six Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Collecting cffi>=1.12 Using cached cffi-1.15.1-cp37-cp37m-linux_armv7l.whl Collecting zope.event Downloading zope.event-4.5.0-py2.py3-none-any.whl (6.8 kB) Collecting zope.hookable>=4.2.0 Downloading zope.hookable-5.2.tar.gz (24 kB) Preparing metadata (setup.py) ... done Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Building wheels for collected packages: cloudflare, pyyaml, configobj, cryptography, zope.interface, zope.hookable Building wheel for cloudflare (setup.py) ... done Created wheel for cloudflare: filename=cloudflare-2.10.1-py2.py3-none-any.whl size=67149 sha256=217f9dc11eb544ab3dbe84c0d63161bc328c7685ea79db0ac38ae663805ed4f2 Stored in directory: /root/.cache/pip/wheels/6c/4a/e7/54f880c649a67173001a212818b2ebd41128688473714c4aaa Building wheel for pyyaml (pyproject.toml) ... done Created wheel for pyyaml: filename=PyYAML-6.0-cp37-cp37m-linux_armv7l.whl size=45335 sha256=7b97945d1b1b1631642f0b33d4e49b7a310954bb9d543e7c92f13475f80c6073 Stored in directory: /root/.cache/pip/wheels/ca/e8/5c/5bdf13545e93ea6fda886afab27e2faecc419e84bf870c2623 Building wheel for configobj (setup.py) ... done Created wheel for configobj: filename=configobj-5.0.6-py3-none-any.whl size=34528 sha256=6209099ae765467fc76c8fcade542f0a9037caf655bc97e59162f0e062042ede Stored in directory: /root/.cache/pip/wheels/0d/c4/19/13d74440f2a571841db6b6e0a273694327498884dafb9cf978 Building wheel for cryptography (pyproject.toml) ... error error: subprocess-exited-with-error × Building wheel for cryptography (pyproject.toml) did not run successfully. │ exit code: 1 ╰─> [179 lines of output] running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-cpython-37 creating build/lib.linux-armv7l-cpython-37/cryptography copying src/cryptography/fernet.py -> build/lib.linux-armv7l-cpython-37/cryptography copying src/cryptography/utils.py -> build/lib.linux-armv7l-cpython-37/cryptography copying src/cryptography/__about__.py -> build/lib.linux-armv7l-cpython-37/cryptography copying src/cryptography/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography copying src/cryptography/exceptions.py -> build/lib.linux-armv7l-cpython-37/cryptography creating build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/name.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/certificate_transparency.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/ocsp.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/general_name.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/base.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/extensions.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/oid.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 copying src/cryptography/x509/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/x509 creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat copying src/cryptography/hazmat/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat copying src/cryptography/hazmat/_oid.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings copying src/cryptography/hazmat/bindings/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/_serialization.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/keywrap.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/_cipheralgorithm.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/hmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/hashes.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/_asymmetric.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/poly1305.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/cmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/constant_time.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives copying src/cryptography/hazmat/primitives/padding.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends copying src/cryptography/hazmat/backends/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl copying src/cryptography/hazmat/bindings/openssl/binding.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl copying src/cryptography/hazmat/bindings/openssl/_conditional.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl copying src/cryptography/hazmat/bindings/openssl/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/openssl creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization copying src/cryptography/hazmat/primitives/serialization/pkcs12.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization copying src/cryptography/hazmat/primitives/serialization/pkcs7.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization copying src/cryptography/hazmat/primitives/serialization/base.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization copying src/cryptography/hazmat/primitives/serialization/ssh.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization copying src/cryptography/hazmat/primitives/serialization/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/serialization creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/rsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/x448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/ed448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/utils.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/ec.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/dh.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/ed25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/types.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/padding.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/dsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric copying src/cryptography/hazmat/primitives/asymmetric/x25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/asymmetric creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/pbkdf2.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/hkdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/concatkdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/x963kdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/kbkdf.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf copying src/cryptography/hazmat/primitives/kdf/scrypt.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/kdf creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers copying src/cryptography/hazmat/primitives/ciphers/algorithms.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers copying src/cryptography/hazmat/primitives/ciphers/modes.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers copying src/cryptography/hazmat/primitives/ciphers/base.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers copying src/cryptography/hazmat/primitives/ciphers/aead.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers copying src/cryptography/hazmat/primitives/ciphers/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/ciphers creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor copying src/cryptography/hazmat/primitives/twofactor/hotp.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor copying src/cryptography/hazmat/primitives/twofactor/totp.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor copying src/cryptography/hazmat/primitives/twofactor/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/primitives/twofactor creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/rsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/x448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/ed448.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/hmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/hashes.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/utils.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/ec.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/dh.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/ed25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/x509.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/poly1305.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/backend.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/cmac.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/ciphers.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/decode_asn1.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/aead.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/__init__.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/dsa.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl copying src/cryptography/hazmat/backends/openssl/x25519.py -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/backends/openssl running egg_info writing src/cryptography.egg-info/PKG-INFO writing dependency_links to src/cryptography.egg-info/dependency_links.txt writing requirements to src/cryptography.egg-info/requires.txt writing top-level names to src/cryptography.egg-info/top_level.txt reading manifest file 'src/cryptography.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' no previously-included directories found matching 'docs/_build' warning: no previously-included files found matching 'vectors' warning: no previously-included files matching '*' found under directory 'vectors' warning: no previously-included files matching '*' found under directory '.github' warning: no previously-included files found matching 'release.py' warning: no previously-included files found matching '.readthedocs.yml' warning: no previously-included files found matching 'dev-requirements.txt' warning: no previously-included files found matching 'tox.ini' warning: no previously-included files found matching 'mypy.ini' warning: no previously-included files matching '*' found under directory '.circleci' adding license file 'LICENSE' adding license file 'LICENSE.APACHE' adding license file 'LICENSE.BSD' adding license file 'LICENSE.PSF' writing manifest file 'src/cryptography.egg-info/SOURCES.txt' copying src/cryptography/py.typed -> build/lib.linux-armv7l-cpython-37/cryptography copying src/cryptography/hazmat/bindings/_openssl.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings creating build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/__init__.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/asn1.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/ocsp.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/x509.pyi -> build/lib.linux-armv7l-cpython-37/cryptography/hazmat/bindings/_rust running build_ext running build_rust /usr/local/lib/python3.7/dist-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning: Installing 'cryptography.hazmat.bindings._rust' as data is deprecated, please list it in `packages`. !! ############################ # Package would be ignored # ############################ Python recognizes 'cryptography.hazmat.bindings._rust' as an importable package, but it is not listed in the `packages` configuration of setuptools. 'cryptography.hazmat.bindings._rust' has been automatically added to the distribution only because it may contain data files, but this behavior is likely to change in future versions of setuptools (and therefore is considered deprecated). Please make sure that 'cryptography.hazmat.bindings._rust' is included as a package by using the `packages` configuration field or the proper discovery methods (for example by using `find_namespace_packages(...)`/`find_namespace:` instead of `find_packages(...)`/`find:`). You can read more about "package discovery" and "data files" on setuptools documentation page. !! check.warn(importable) =============================DEBUG ASSISTANCE============================= If you are seeing a compilation error please try the following steps to successfully install cryptography: 1) Upgrade to the latest pip and try again. This will fix errors for most users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip 2) Read https://cryptography.io/en/latest/installation/ for specific instructions for your platform. 3) Check our frequently asked questions for more information: https://cryptography.io/en/latest/faq/ 4) Ensure you have a recent Rust toolchain installed: https://cryptography.io/en/latest/installation/#rust Python: 3.7.3 platform: Linux-5.15.61-v7l+-armv7l-with-debian-10.12 pip: 22.2.2 setuptools: 65.3.0 setuptools_rust: 1.5.1 rustc: 1.41.1 =============================DEBUG ASSISTANCE============================= error: Rust 1.41.1 does not match extension requirement >=1.48.0 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cryptography Building wheel for zope.interface (setup.py) ... done Created wheel for zope.interface: filename=zope.interface-5.4.0-cp37-cp37m-linux_armv7l.whl size=223442 sha256=b3d4f275141cb4d76f97b2748004c972109290286cd678d49d2bc87337e3f480 Stored in directory: /root/.cache/pip/wheels/f8/5c/3e/b5145fe8a9350e5ba1c2b70f6dfb9e9b2f9406d9d74385b671 Building wheel for zope.hookable (setup.py) ... done Created wheel for zope.hookable: filename=zope.hookable-5.2-cp37-cp37m-linux_armv7l.whl size=25980 sha256=8e96c653a055cc71ec614de6470f8557a3b1c8782055dc5b1a5c5f4fab7ce6ea Stored in directory: /root/.cache/pip/wheels/dc/2f/08/590e0ea8c24f526762c5349f4eb4f196bb8dd335b57fb50e0e Successfully built cloudflare pyyaml configobj zope.interface zope.hookable Failed to build cryptography ERROR: Could not build wheels for cryptography, which is required to install pyproject.toml-based projects
Same problem here. did you find a solution?
tried
pip install rust --upgrade
but got this error
`[root@docker-5e9444045b64:/app]# pip install rust --upgrade Collecting rust Using cached RUST-0.1.1.tar.gz (13 kB) Preparing metadata (setup.py) ... done Collecting matplotlib Using cached matplotlib-3.5.3.tar.gz (35.2 MB) Preparing metadata (setup.py) ... error error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully. │ exit code: 1 ╰─> [132 lines of output] error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [75 lines of output]
running egg_info
running build_src
build_src
creating numpy.egg-info
writing numpy.egg-info/PKG-INFO
writing dependency_links to numpy.egg-info/dependency_links.txt
writing entry points to numpy.egg-info/entry_points.txt
writing top-level names to numpy.egg-info/top_level.txt
writing manifest file 'numpy.egg-info/SOURCES.txt'
unifing config_cc, config, build_clib, build_ext, build commands --compiler options
unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options
Running from numpy source directory.
/usr/local/lib/python3.7/dist-packages/setuptools/command/egg_info.py:647: SetuptoolsDeprecationWarning: Custom 'build_py' does not implement 'get_data_files_without_manifest'.
Please extend command classes from setuptools instead of distutils.
SetuptoolsDeprecationWarning
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
main()
File "/usr/local/lib/python3.7/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "/usr/local/lib/python3.7/dist-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
return hook(config_settings)
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 338, in get_requires_for_build_wheel
return self._get_build_requires(config_settings, requirements=['wheel'])
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 320, in _get_build_requires
self.run_setup()
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 483, in run_setup
self).run_setup(setup_script=setup_script)
File "/usr/local/lib/python3.7/dist-packages/setuptools/build_meta.py", line 335, in run_setup
exec(code, locals())
File "<string>", line 448, in <module>
File "<string>", line 440, in setup_package
File "/usr/local/lib/python3.7/dist-packages/setuptools/__init__.py", line 87, in setup
return distutils.core.setup(**attrs)
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/core.py", line 185, in setup
return run_commands(dist)
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/core.py", line 201, in run_commands
dist.run_commands()
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 973, in run_commands
self.run_command(cmd)
File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/tmp/pip-wheel-cikkqhv5/numpy_ad4e7b217f0a4e569e47c7219931c29f/numpy/distutils/command/egg_info.py", line 25, in run
_egg_info.run(self)
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/egg_info.py", line 308, in run
self.find_sources()
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/egg_info.py", line 316, in find_sources
mm.run()
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/egg_info.py", line 560, in run
self.add_defaults()
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/egg_info.py", line 597, in add_defaults
sdist.add_defaults(self)
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/sdist.py", line 107, in add_defaults
self._add_defaults_build_sub_commands()
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/sdist.py", line 127, in _add_defaults_build_sub_commands
self.filelist.extend(chain.from_iterable(files))
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/egg_info.py", line 503, in extend
self.files.extend(filter(self._safe_path, paths))
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/sdist.py", line 126, in <genexpr>
files = (c.get_source_files() for c in cmds if hasattr(c, "get_source_files"))
File "/usr/local/lib/python3.7/dist-packages/setuptools/command/sdist.py", line 125, in <genexpr>
cmds = (self.get_finalized_command(c) for c in missing_cmds)
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 306, in get_finalized_command
cmd_obj.ensure_finalized()
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 109, in ensure_finalized
self.finalize_options()
File "/tmp/pip-wheel-cikkqhv5/numpy_ad4e7b217f0a4e569e47c7219931c29f/numpy/distutils/command/config_compiler.py", line 69, in finalize_options
v = getattr(c, a)
File "/tmp/pip-build-env-y3ndedop/overlay/lib/python3.7/site-packages/Cython/Distutils/old_build_ext.py", line 157, in __getattr__
return _build_ext.build_ext.__getattr__(self, name)
File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 105, in __getattr__
raise AttributeError(attr)
AttributeError: fcompiler
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Edit mplsetup.cfg to change the build options; suppress output with --quiet.
BUILDING MATPLOTLIB
python: yes [3.7.3 (default, Jan 22 2021, 20:04:44) [GCC 8.3.0]]
platform: yes [linux]
tests: no [skipping due to configuration]
macosx: no [Mac OS-X only]
/usr/local/lib/python3.7/dist-packages/setuptools/installer.py:30: SetuptoolsDeprecationWarning: setuptools.installer is deprecated. Requirements should be satisfied by a PEP 517 installer.
SetuptoolsDeprecationWarning,
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/setuptools/installer.py", line 82, in fetch_build_egg
subprocess.check_call(cmd)
File "/usr/lib/python3.7/subprocess.py", line 347, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmprck6y8yt', '--quiet', 'numpy>=1.17']' returned non-zero exit status 1.
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "<string>", line 36, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-yacy738t/matplotlib_00e6793e86b346a595c58f813154a06a/setup.py", line 349, in <module>
"sdist": Sdist,
File "/usr/local/lib/python3.7/dist-packages/setuptools/__init__.py", line 86, in setup
_install_setup_requires(attrs)
File "/usr/local/lib/python3.7/dist-packages/setuptools/__init__.py", line 80, in _install_setup_requires
dist.fetch_build_eggs(dist.setup_requires)
File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 878, in fetch_build_eggs
replace_conflicting=True,
File "/usr/local/lib/python3.7/dist-packages/pkg_resources/__init__.py", line 791, in resolve
replace_conflicting=replace_conflicting
File "/usr/local/lib/python3.7/dist-packages/pkg_resources/__init__.py", line 1075, in best_match
return self.obtain(req, installer)
File "/usr/local/lib/python3.7/dist-packages/pkg_resources/__init__.py", line 1087, in obtain
return installer(requirement)
File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 945, in fetch_build_egg
return fetch_build_egg(self, req)
File "/usr/local/lib/python3.7/dist-packages/setuptools/installer.py", line 84, in fetch_build_egg
raise DistutilsError(str(e)) from e
distutils.errors.DistutilsError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmprck6y8yt', '--quiet', 'numpy>=1.17']' returned non-zero exit status 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: metadata-generation-failed
× Encountered error while generating package metadata. ╰─> See above for output.
note: This is an issue with the package mentioned above, not pip. hint: See above for details.`
@vascozorrinho
I used this command and that works for me.
pip install certbot-dns-cloudflare --index-url https://www.piwheels.org/simple --prefer-binary
Please keep in mind that you have to use this command again after restarting your Docker image otherwise you will get a Bad Gateway error.
Hope for a decent fix soon...
had similiar problems with netcup i opened the npm container shell and installed latest certbot-dns-netcup which is 1.2.0 With this, i can get a wildcard certificate using shell commands.
Successfully received certificate. Certificate is saved at: /etc/letsencrypt/live/npm-4/fullchain.pem Key is saved at: /etc/letsencrypt/live/npm-4/privkey.pem This certificate expires on 2023-03-05. These files will be updated when the certificate renews.
Unfortuately, this certificate will not be shown in the gui. When i run the gui wizard again for netcup dns challenge, it will downgrade certbot-dns-netcup to 1.0.1 which will fail again.
I suggest you set TTL to a very low value during testing, like 60s, but don't forget to increase later.
Please update certbot-dns-netcup install routine for this container.
@renslinden you just saved me again.. i'm surprised this is still a problem
Actually, this ist solved in the amd64 docker Container, which already has certbot 2.1.0
It's just the armv7 i guess.
I run this inside an amd64 lxc Container and it works great.
Damn! I'm running this on a 32 bits RP 3 and that device is not powerful enough to run a 64bit os. I actually tried that.. Maybe in the future I'll upgrade but since this doesn't happen that often, for now, this will work
@vascozorrinho
I used this command and that works for me.
pip install certbot-dns-cloudflare --index-url https://www.piwheels.org/simple --prefer-binaryPlease keep in mind that you have to use this command again after restarting your Docker image otherwise you will get a Bad Gateway error.
Hope for a decent fix soon...
Update for you, this worked for me on an RPi 4 under Portainer on the latest docker tag.
Appears to be related to arm7, worked fine on amd64.
