nginx-proxy-manager Cannot Log into Admin After Upgrade to 2.9.15

Updated via docker-compose to 2.9.15 from 2.9.14 and can no longer access the admin console. Login page loads but cannot log in.

Docker logs -

[1/17/2022] [7:56:36 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables
[1/17/2022] [7:56:39 AM] [Migrate  ] › ℹ  info      Current database version: none

I don't see anything further than this. Normally can take ~ 30s-1min before other bits are logged but nothing further showing up with 2.9.15. Decided to roll back to 2.9.14 - pulled the 2.9.14 image and loaded - works fine!.

I've tried twice with 2.9.15 and no luck. Changes didn't show any big ones so any pointers as to what could cause this?

Thanks

Jan 17 '22 08:01 jiriteach

Can confirm, update from 2.9.9 to 2.9.15 can't login. Downgraded to 2.9.14 and could login again.

Jan 17 '22 08:01 kjw1985

I can't confirm. I went from 2.9.14 to 2.9.15 in my production environments just fine.

The current database version should not be none. What database are you using, mysql/maria or sqlite?

Jan 17 '22 08:01 jc21

Using SQLLite

Jan 17 '22 08:01 jiriteach

Just tested on a sqlite setup, also don't have a problem logging in.

[1/17/2022] [8:23:24 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables
[1/17/2022] [8:23:26 AM] [Migrate  ] › ℹ  info      Current database version: none
[1/17/2022] [8:23:26 AM] [Setup    ] › ℹ  info      Logrotate Timer initialized
[1/17/2022] [8:23:26 AM] [Setup    ] › ℹ  info      Logrotate completed.
[1/17/2022] [8:23:26 AM] [IP Ranges] › ℹ  info      Fetching IP Ranges from online services...
[1/17/2022] [8:23:26 AM] [IP Ranges] › ℹ  info      Fetching https://ip-ranges.amazonaws.com/ip-ranges.json
[1/17/2022] [8:23:26 AM] [IP Ranges] › ℹ  info      Fetching https://www.cloudflare.com/ips-v4
[1/17/2022] [8:23:26 AM] [IP Ranges] › ℹ  info      Fetching https://www.cloudflare.com/ips-v6
[1/17/2022] [8:23:27 AM] [SSL      ] › ℹ  info      Let's Encrypt Renewal Timer initialized
[1/17/2022] [8:23:27 AM] [SSL      ] › ℹ  info      Renewing SSL certs close to expiry...
[1/17/2022] [8:23:27 AM] [IP Ranges] › ℹ  info      IP Ranges Renewal Timer initialized
[1/17/2022] [8:23:27 AM] [Global   ] › ℹ  info      Backend PID 243 listening on port 3000 ...
[1/17/2022] [8:23:29 AM] [Nginx    ] › ℹ  info      Reloading Nginx
[1/17/2022] [8:23:29 AM] [SSL      ] › ℹ  info      Renew Complete

Jan 17 '22 08:01 jc21

and yes I realise the database version is also none there...

Jan 17 '22 08:01 jc21

I'm using jc21/mariadb-aria:10.4.15 as my database.

Hereby part of my logging:

[cont-finish.d] executing container finish scripts...,
[cont-finish.d] done.,
[s6-finish] waiting for services.,
[s6-finish] sending all processes the TERM signal.,
[s6-finish] sending all processes the KILL signal and exiting.,
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.,
[s6-init] ensuring user provided files have correct perms...exited 0.,
[fix-attrs.d] applying ownership & permissions fixes...,
[fix-attrs.d] done.,
[cont-init.d] executing container initialization scripts...,
[cont-init.d] 01_perms.sh: executing... ,
Changing ownership of /data/logs to 0:0,
[cont-init.d] 01_perms.sh: exited 0.,
[cont-init.d] 01_s6-secret-init.sh: executing... ,
[cont-init.d] 01_s6-secret-init.sh: exited 0.,
[cont-init.d] done.,
[services.d] starting services,
[services.d] done.,
❯ Enabling IPV6 in hosts: /etc/nginx/conf.d,
  ❯ /etc/nginx/conf.d/include/letsencrypt-acme-challenge.conf,
  ❯ /etc/nginx/conf.d/include/ssl-ciphers.conf,
  ❯ /etc/nginx/conf.d/include/assets.conf,
  ❯ /etc/nginx/conf.d/include/force-ssl.conf,
  ❯ /etc/nginx/conf.d/include/ip_ranges.conf,
  ❯ /etc/nginx/conf.d/include/block-exploits.conf,
  ❯ /etc/nginx/conf.d/include/proxy.conf,
  ❯ /etc/nginx/conf.d/include/resolvers.conf,
  ❯ /etc/nginx/conf.d/production.conf,
  ❯ /etc/nginx/conf.d/default.conf,
❯ Enabling IPV6 in hosts: /data/nginx,
  ❯ /data/nginx/proxy_host/35.conf,
  ❯ /data/nginx/proxy_host/33.conf,
  ❯ /data/nginx/proxy_host/14.conf,
  ❯ /data/nginx/proxy_host/38.conf,
  ❯ /data/nginx/proxy_host/26.conf,
  ❯ /data/nginx/proxy_host/17.conf,
  ❯ /data/nginx/proxy_host/20.conf,
  ❯ /data/nginx/proxy_host/5.conf,
  ❯ /data/nginx/proxy_host/13.conf,
  ❯ /data/nginx/proxy_host/37.conf,
  ❯ /data/nginx/proxy_host/6.conf,
  ❯ /data/nginx/proxy_host/21.conf,
  ❯ /data/nginx/proxy_host/10.conf,
  ❯ /data/nginx/proxy_host/9.conf,
  ❯ /data/nginx/proxy_host/34.conf,
  ❯ /data/nginx/proxy_host/39.conf,
  ❯ /data/nginx/proxy_host/11.conf,
  ❯ /data/nginx/proxy_host/40.conf,
  ❯ /data/nginx/proxy_host/32.conf,
  ❯ /data/nginx/proxy_host/30.conf,
  ❯ /data/nginx/proxy_host/36.conf,
  ❯ /data/nginx/proxy_host/7.conf,
  ❯ /data/nginx/proxy_host/43.conf,
  ❯ /data/nginx/proxy_host/44.conf,
  ❯ /data/nginx/proxy_host/18.conf,
[1/17/2022] [9:29:14 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables,
  ❯ /data/nginx/proxy_host/41.conf,
  ❯ /data/nginx/default_host/site.conf,
[1/17/2022] [9:29:15 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,
[1/17/2022] [9:29:18 AM] [Global   ] › ✖  error     Command failed: pip install certbot-dns-transip~=0.3.3 ,
  ERROR: Command errored out with exit status 1:,
   command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/setup.py'"'"'; __file__='"'"'/tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-umczna8j,
       cwd: /tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/,
  Complete output (1 lines):,
  error in suds-jurko setup command: use_2to3 is invalid.,
  ----------------------------------------,
WARNING: Discarding https://files.pythonhosted.org/packages/d0/88/f3bed9b494e0dae26bd55e5f3d527b8244208125024727267e8109956a11/suds-jurko-0.6.zip#sha256=1cb7252cb13018fc32887c3a834ed7c6648a5b5c4c159be5806da2e1785399e8 (from https://pypi.org/simple/suds-jurko/). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.,
  ERROR: Command errored out with exit status 1:,
   command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/setup.py'"'"'; __file__='"'"'/tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-7o0fov4n,
       cwd: /tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/,
  Complete output (1 lines):,
  error in suds-jurko setup command: use_2to3 is invalid.,
  ----------------------------------------,
WARNING: Discarding https://files.pythonhosted.org/packages/bd/6f/54fbf0999a606680d27c69b1ad12dfff62768ecb9fe48524cebda6eb4423/suds-jurko-0.6.tar.bz2#sha256=29edb72fd21e3044093d86f33c66cf847c5aaab26d64cb90e69e528ef014e57f (from https://pypi.org/simple/suds-jurko/). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.,
ERROR: Could not find a version that satisfies the requirement suds-jurko~=0.6 (from certbot-dns-transip) (from versions: 0.4.1.jurko.1, 0.4.1.jurko.2, 0.4.1.jurko.3, 0.4.1.jurko.4, 0.4.1.jurko.5, 0.5, 0.6),
ERROR: No matching distribution found for suds-jurko~=0.6,
,
[1/17/2022] [9:29:19 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables,
[1/17/2022] [9:29:19 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,

Jan 17 '22 09:01 kjw1985

Will try again now and see what happens ...

Jan 17 '22 09:01 jiriteach

No go again -

docker-compose down
docker-compose pull
docker-compose up -d

Standard way i've been upgrading for a long while now.

Docker log -

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 01_perms.sh: executing... 
Changing ownership of /data/logs to 0:0
[cont-init.d] 01_perms.sh: exited 0.
[cont-init.d] 01_s6-secret-init.sh: executing... 
[cont-init.d] 01_s6-secret-init.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
❯ Enabling IPV6 in hosts: /etc/nginx/conf.d
  ❯ /etc/nginx/conf.d/default.conf
  ❯ /etc/nginx/conf.d/production.conf
  ❯ /etc/nginx/conf.d/include/block-exploits.conf
  ❯ /etc/nginx/conf.d/include/ip_ranges.conf
  ❯ /etc/nginx/conf.d/include/letsencrypt-acme-challenge.conf
  ❯ /etc/nginx/conf.d/include/force-ssl.conf
  ❯ /etc/nginx/conf.d/include/assets.conf
  ❯ /etc/nginx/conf.d/include/ssl-ciphers.conf
  ❯ /etc/nginx/conf.d/include/proxy.conf
  ❯ /etc/nginx/conf.d/include/resolvers.conf
❯ Enabling IPV6 in hosts: /data/nginx
  ❯ /data/nginx/default_host/site.conf
  ❯ /data/nginx/redirection_host/1.conf
  ❯ /data/nginx/redirection_host/5.conf
  ❯ /data/nginx/redirection_host/4.conf
  ❯ /data/nginx/dead_host/2.conf
  ❯ /data/nginx/dead_host/3.conf
  ❯ /data/nginx/dead_host/6.conf
  ❯ /data/nginx/proxy_host/2.conf
  ❯ /data/nginx/proxy_host/3.conf
  ❯ /data/nginx/proxy_host/19.conf
  ❯ /data/nginx/proxy_host/1.conf
  ❯ /data/nginx/proxy_host/14.conf
  ❯ /data/nginx/proxy_host/5.conf
  ❯ /data/nginx/proxy_host/6.conf
  ❯ /data/nginx/proxy_host/16.conf
  ❯ /data/nginx/proxy_host/9.conf
  ❯ /data/nginx/proxy_host/17.conf
  ❯ /data/nginx/proxy_host/7.conf
  ❯ /data/nginx/proxy_host/4.conf
  ❯ /data/nginx/proxy_host/10.conf
  ❯ /data/nginx/proxy_host/8.conf
  ❯ /data/nginx/proxy_host/15.conf
  ❯ /data/nginx/stream/2.conf
  ❯ /data/nginx/stream/1.conf
[1/17/2022] [9:38:59 AM] [Global   ] › ℹ  info.   Manual db configuration already exists, skipping config creation from environment variables
[1/17/2022] [9:39:01 AM] [Migrate  ] › ℹ  info.   Current database version: none

Trying to log into admin - i'm seeing 502's in Chromes console. Existing rules are process OK through as all my checks are running.

My docker-compose.yml

version: '3'
services:
  app:
    image: 'jc21/nginx-proxy-manager:latest'
    #image: 'jc21/nginx-proxy-manager:2.9.14'    
    restart: always
    network_mode: host
    #ports:
    #  - '80:80'
    #  - '81:81'
    #  - '443:443'
    environment:
      DB_SQLITE_FILE: "/data/npm_database.sqlite"
    volumes:
      - /home/pi/Docker/npm/data:/data
      - /home/pi/Docker/npm/letsencrypt:/etc/letsencrypt
      - /home/pi/Docker/npm/config/db_configuration.json:/app/config/production.json

Reverting back to 2.9.14 and all working fine again.

Jan 17 '22 09:01 jiriteach

Found updated logs with errors -

    Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
    Building wheels for collected packages: cffi
    Building wheel for cffi (setup.py): started
    Building wheel for cffi (setup.py): finished with status 'error'
    ERROR: Command errored out with exit status 1:
     command: /usr/bin/python3 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/setup.py'"'"'; __file__='"'"'/tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-7gdh7ak6
         cwd: /tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/
    Complete output (35 lines):
    running bdist_wheel
    running build
    running build_py
    creating build
    creating build/lib.linux-armv7l-3.7
    creating build/lib.linux-armv7l-3.7/cffi
    copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
    copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
    running build_ext
    creating build/temp.linux-armv7l-3.7
    creating build/temp.linux-armv7l-3.7/c
    arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -flto -fuse-linker-plugin -ffat-lto-objects -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
    c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
     #include <Python.h>
              ^~~~~~~~~~
    compilation terminated.
    error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
    ----------------------------------------
    ERROR: Failed building wheel for cffi
    Running setup.py clean for cffi
    Failed to build cffi
    Installing collected packages: pycparser, wheel, setuptools, cffi
      Running setup.py install for cffi: started
      Running setup.py install for cffi: finished with status 'error'
      ERROR: Command errored out with exit status 1:
       command: /usr/bin/python3 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/setup.py'"'"'; __file__='"'"'/tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-mt9n2ci2/install-record.txt --single-version-externally-managed --prefix /tmp/pip-build-env-wzdqzjma/overlay --compile --install-headers /tmp/pip-build-env-wzdqzjma/overlay/include/python3.7m/cffi
           cwd: /tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/
      Complete output (37 lines):
      running install
      /usr/local/lib/python3.7/dist-packages/setuptools/command/install.py:37: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
        setuptools.SetuptoolsDeprecationWarning,
      running build
      running build_py
      creating build
      creating build/lib.linux-armv7l-3.7
      creating build/lib.linux-armv7l-3.7/cffi
      copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
      running build_ext
      creating build/temp.linux-armv7l-3.7
      creating build/temp.linux-armv7l-3.7/c
      arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -flto -fuse-linker-plugin -ffat-lto-objects -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
      c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
       #include <Python.h>
                ^~~~~~~~~~
      compilation terminated.
      error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
      ----------------------------------------
      ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/setup.py'"'"'; __file__='"'"'/tmp/pip-install-s9qk0060/cffi_37bc9a636f714c0490954d9e204ef3ed/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-mt9n2ci2/install-record.txt --single-version-externally-managed --prefix /tmp/pip-build-env-wzdqzjma/overlay --compile --install-headers /tmp/pip-build-env-wzdqzjma/overlay/include/python3.7m/cffi Check the logs for full command output.
      ----------------------------------------
WARNING: Discarding https://files.pythonhosted.org/packages/69/ed/5e97b7f54237a9e4e6291b6e52173372b7fa45ca730d36ea90b790c0059a/cryptography-2.5.tar.gz#sha256=4946b67235b9d2ea7d31307be9d5ad5959d6c4a8f98f900157b47abddf698401 (from https://pypi.org/simple/cryptography/) (requires-python:>=2.7,!=3.0.*,!=3.1.*,!=3.2.*,!=3.3.*). Command errored out with exit status 1: /usr/bin/python3 /tmp/pip-standalone-pip-hr7si0sj/__env_pip__.zip/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-wzdqzjma/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'setuptools>=18.5' wheel 'cffi>=1.8,!=1.11.3; python_implementation != '"'"'PyPy'"'"'' Check the logs for full command output.
ERROR: Could not find a version that satisfies the requirement cryptography>=2.5.0 (from acme) (from versions: 0.1, 0.2, 0.2.1, 0.2.2, 0.3, 0.4, 0.5, 0.5.1, 0.5.2, 0.5.3, 0.5.4, 0.6, 0.6.1, 0.7, 0.7.1, 0.7.2, 0.8, 0.8.1, 0.8.2, 0.9, 0.9.1, 0.9.2, 0.9.3, 1.0, 1.0.1, 1.0.2, 1.1, 1.1.1, 1.1.2, 1.2, 1.2.1, 1.2.2, 1.2.3, 1.3, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.4, 1.5, 1.5.1, 1.5.2, 1.5.3, 1.6, 1.7, 1.7.1, 1.7.2, 1.8, 1.8.1, 1.8.2, 1.9, 2.0, 2.0.1, 2.0.2, 2.0.3, 2.1, 2.1.1, 2.1.2, 2.1.3, 2.1.4, 2.2, 2.2.1, 2.2.2, 2.3, 2.3.1, 2.4, 2.4.1, 2.4.2, 2.5, 2.6, 2.6.1, 2.7, 2.8, 2.9, 2.9.1, 2.9.2, 3.0, 3.1, 3.1.1, 3.2, 3.2.1, 3.3, 3.3.1, 3.3.2, 3.4, 3.4.1, 3.4.2, 3.4.3, 3.4.4, 3.4.5, 3.4.6, 3.4.7, 3.4.8, 35.0.0, 36.0.0, 36.0.1)
ERROR: No matching distribution found for cryptography>=2.5.0

[1/17/2022] [9:49:53 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables
[1/17/2022] [9:49:53 AM] [Migrate  ] › ℹ  info      Current database version: none

Jan 17 '22 09:01 jiriteach

I'm using jc21/mariadb-aria:10.4.15 as my database.

Hereby part of my logging:

[cont-finish.d] executing container finish scripts...,
[cont-finish.d] done.,
[s6-finish] waiting for services.,
[s6-finish] sending all processes the TERM signal.,
[s6-finish] sending all processes the KILL signal and exiting.,
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.,
[s6-init] ensuring user provided files have correct perms...exited 0.,
[fix-attrs.d] applying ownership & permissions fixes...,
[fix-attrs.d] done.,
[cont-init.d] executing container initialization scripts...,
[cont-init.d] 01_perms.sh: executing... ,
Changing ownership of /data/logs to 0:0,
[cont-init.d] 01_perms.sh: exited 0.,
[cont-init.d] 01_s6-secret-init.sh: executing... ,
[cont-init.d] 01_s6-secret-init.sh: exited 0.,
[cont-init.d] done.,
[services.d] starting services,
[services.d] done.,
❯ Enabling IPV6 in hosts: /etc/nginx/conf.d,
  ❯ /etc/nginx/conf.d/include/letsencrypt-acme-challenge.conf,
  ❯ /etc/nginx/conf.d/include/ssl-ciphers.conf,
  ❯ /etc/nginx/conf.d/include/assets.conf,
  ❯ /etc/nginx/conf.d/include/force-ssl.conf,
  ❯ /etc/nginx/conf.d/include/ip_ranges.conf,
  ❯ /etc/nginx/conf.d/include/block-exploits.conf,
  ❯ /etc/nginx/conf.d/include/proxy.conf,
  ❯ /etc/nginx/conf.d/include/resolvers.conf,
  ❯ /etc/nginx/conf.d/production.conf,
  ❯ /etc/nginx/conf.d/default.conf,
❯ Enabling IPV6 in hosts: /data/nginx,
  ❯ /data/nginx/proxy_host/35.conf,
  ❯ /data/nginx/proxy_host/33.conf,
  ❯ /data/nginx/proxy_host/14.conf,
  ❯ /data/nginx/proxy_host/38.conf,
  ❯ /data/nginx/proxy_host/26.conf,
  ❯ /data/nginx/proxy_host/17.conf,
  ❯ /data/nginx/proxy_host/20.conf,
  ❯ /data/nginx/proxy_host/5.conf,
  ❯ /data/nginx/proxy_host/13.conf,
  ❯ /data/nginx/proxy_host/37.conf,
  ❯ /data/nginx/proxy_host/6.conf,
  ❯ /data/nginx/proxy_host/21.conf,
  ❯ /data/nginx/proxy_host/10.conf,
  ❯ /data/nginx/proxy_host/9.conf,
  ❯ /data/nginx/proxy_host/34.conf,
  ❯ /data/nginx/proxy_host/39.conf,
  ❯ /data/nginx/proxy_host/11.conf,
  ❯ /data/nginx/proxy_host/40.conf,
  ❯ /data/nginx/proxy_host/32.conf,
  ❯ /data/nginx/proxy_host/30.conf,
  ❯ /data/nginx/proxy_host/36.conf,
  ❯ /data/nginx/proxy_host/7.conf,
  ❯ /data/nginx/proxy_host/43.conf,
  ❯ /data/nginx/proxy_host/44.conf,
  ❯ /data/nginx/proxy_host/18.conf,
[1/17/2022] [9:29:14 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables,
  ❯ /data/nginx/proxy_host/41.conf,
  ❯ /data/nginx/default_host/site.conf,
[1/17/2022] [9:29:15 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,
[1/17/2022] [9:29:18 AM] [Global   ] › ✖  error     Command failed: pip install certbot-dns-transip~=0.3.3 ,
  ERROR: Command errored out with exit status 1:,
   command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/setup.py'"'"'; __file__='"'"'/tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-umczna8j,
       cwd: /tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/,
  Complete output (1 lines):,
  error in suds-jurko setup command: use_2to3 is invalid.,
  ----------------------------------------,
WARNING: Discarding https://files.pythonhosted.org/packages/d0/88/f3bed9b494e0dae26bd55e5f3d527b8244208125024727267e8109956a11/suds-jurko-0.6.zip#sha256=1cb7252cb13018fc32887c3a834ed7c6648a5b5c4c159be5806da2e1785399e8 (from https://pypi.org/simple/suds-jurko/). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.,
  ERROR: Command errored out with exit status 1:,
   command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/setup.py'"'"'; __file__='"'"'/tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-7o0fov4n,
       cwd: /tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/,
  Complete output (1 lines):,
  error in suds-jurko setup command: use_2to3 is invalid.,
  ----------------------------------------,
WARNING: Discarding https://files.pythonhosted.org/packages/bd/6f/54fbf0999a606680d27c69b1ad12dfff62768ecb9fe48524cebda6eb4423/suds-jurko-0.6.tar.bz2#sha256=29edb72fd21e3044093d86f33c66cf847c5aaab26d64cb90e69e528ef014e57f (from https://pypi.org/simple/suds-jurko/). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.,
ERROR: Could not find a version that satisfies the requirement suds-jurko~=0.6 (from certbot-dns-transip) (from versions: 0.4.1.jurko.1, 0.4.1.jurko.2, 0.4.1.jurko.3, 0.4.1.jurko.4, 0.4.1.jurko.5, 0.5, 0.6),
ERROR: No matching distribution found for suds-jurko~=0.6,
,
[1/17/2022] [9:29:19 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables,
[1/17/2022] [9:29:19 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,

Same issue here. I'm using Mariadb as my database with the latest version from jc21's docker container. The upgrade seems to have created a loop that is generating high load on my server.

Jan 17 '22 11:01 Manuel5cc

So the issue is setuptools, version 60 is causing problems whereas version 58 is fine with the certbot plugins you're using. I'll get a new version out soon

Jan 17 '22 11:01 jc21

I'm using jc21/mariadb-aria:10.4.15 as my database. Hereby part of my logging:

[cont-finish.d] executing container finish scripts...,
[cont-finish.d] done.,
[s6-finish] waiting for services.,
[s6-finish] sending all processes the TERM signal.,
[s6-finish] sending all processes the KILL signal and exiting.,
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.,
[s6-init] ensuring user provided files have correct perms...exited 0.,
[fix-attrs.d] applying ownership & permissions fixes...,
[fix-attrs.d] done.,
[cont-init.d] executing container initialization scripts...,
[cont-init.d] 01_perms.sh: executing... ,
Changing ownership of /data/logs to 0:0,
[cont-init.d] 01_perms.sh: exited 0.,
[cont-init.d] 01_s6-secret-init.sh: executing... ,
[cont-init.d] 01_s6-secret-init.sh: exited 0.,
[cont-init.d] done.,
[services.d] starting services,
[services.d] done.,
❯ Enabling IPV6 in hosts: /etc/nginx/conf.d,
  ❯ /etc/nginx/conf.d/include/letsencrypt-acme-challenge.conf,
  ❯ /etc/nginx/conf.d/include/ssl-ciphers.conf,
  ❯ /etc/nginx/conf.d/include/assets.conf,
  ❯ /etc/nginx/conf.d/include/force-ssl.conf,
  ❯ /etc/nginx/conf.d/include/ip_ranges.conf,
  ❯ /etc/nginx/conf.d/include/block-exploits.conf,
  ❯ /etc/nginx/conf.d/include/proxy.conf,
  ❯ /etc/nginx/conf.d/include/resolvers.conf,
  ❯ /etc/nginx/conf.d/production.conf,
  ❯ /etc/nginx/conf.d/default.conf,
❯ Enabling IPV6 in hosts: /data/nginx,
  ❯ /data/nginx/proxy_host/35.conf,
  ❯ /data/nginx/proxy_host/33.conf,
  ❯ /data/nginx/proxy_host/14.conf,
  ❯ /data/nginx/proxy_host/38.conf,
  ❯ /data/nginx/proxy_host/26.conf,
  ❯ /data/nginx/proxy_host/17.conf,
  ❯ /data/nginx/proxy_host/20.conf,
  ❯ /data/nginx/proxy_host/5.conf,
  ❯ /data/nginx/proxy_host/13.conf,
  ❯ /data/nginx/proxy_host/37.conf,
  ❯ /data/nginx/proxy_host/6.conf,
  ❯ /data/nginx/proxy_host/21.conf,
  ❯ /data/nginx/proxy_host/10.conf,
  ❯ /data/nginx/proxy_host/9.conf,
  ❯ /data/nginx/proxy_host/34.conf,
  ❯ /data/nginx/proxy_host/39.conf,
  ❯ /data/nginx/proxy_host/11.conf,
  ❯ /data/nginx/proxy_host/40.conf,
  ❯ /data/nginx/proxy_host/32.conf,
  ❯ /data/nginx/proxy_host/30.conf,
  ❯ /data/nginx/proxy_host/36.conf,
  ❯ /data/nginx/proxy_host/7.conf,
  ❯ /data/nginx/proxy_host/43.conf,
  ❯ /data/nginx/proxy_host/44.conf,
  ❯ /data/nginx/proxy_host/18.conf,
[1/17/2022] [9:29:14 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables,
  ❯ /data/nginx/proxy_host/41.conf,
  ❯ /data/nginx/default_host/site.conf,
[1/17/2022] [9:29:15 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,
[1/17/2022] [9:29:18 AM] [Global   ] › ✖  error     Command failed: pip install certbot-dns-transip~=0.3.3 ,
  ERROR: Command errored out with exit status 1:,
   command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/setup.py'"'"'; __file__='"'"'/tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-umczna8j,
       cwd: /tmp/pip-install-uk4gd6as/suds-jurko_287474b5f40d41ad95e9d7b108335533/,
  Complete output (1 lines):,
  error in suds-jurko setup command: use_2to3 is invalid.,
  ----------------------------------------,
WARNING: Discarding https://files.pythonhosted.org/packages/d0/88/f3bed9b494e0dae26bd55e5f3d527b8244208125024727267e8109956a11/suds-jurko-0.6.zip#sha256=1cb7252cb13018fc32887c3a834ed7c6648a5b5c4c159be5806da2e1785399e8 (from https://pypi.org/simple/suds-jurko/). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.,
  ERROR: Command errored out with exit status 1:,
   command: /usr/bin/python3 -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/setup.py'"'"'; __file__='"'"'/tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-7o0fov4n,
       cwd: /tmp/pip-install-uk4gd6as/suds-jurko_685079b4ab0a4855a6fd6ac60e69a589/,
  Complete output (1 lines):,
  error in suds-jurko setup command: use_2to3 is invalid.,
  ----------------------------------------,
WARNING: Discarding https://files.pythonhosted.org/packages/bd/6f/54fbf0999a606680d27c69b1ad12dfff62768ecb9fe48524cebda6eb4423/suds-jurko-0.6.tar.bz2#sha256=29edb72fd21e3044093d86f33c66cf847c5aaab26d64cb90e69e528ef014e57f (from https://pypi.org/simple/suds-jurko/). Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.,
ERROR: Could not find a version that satisfies the requirement suds-jurko~=0.6 (from certbot-dns-transip) (from versions: 0.4.1.jurko.1, 0.4.1.jurko.2, 0.4.1.jurko.3, 0.4.1.jurko.4, 0.4.1.jurko.5, 0.5, 0.6),
ERROR: No matching distribution found for suds-jurko~=0.6,
,
[1/17/2022] [9:29:19 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables,
[1/17/2022] [9:29:19 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,

Same issue here. I'm using Mariadb as my database with the latest version from jc21's docker container. The upgrade seems to have created a loop that is generating high load on my server.

In my case, downgrading (tried 2 or 3 releases behind) didn't fix the issue, as now it's stuck at this step: [1/17/2022] [11:44:48 AM] [Setup ] › ℹ info Wrote JWT key pair to config file: /app/config/production.json and still cannot login.

Jan 17 '22 11:01 Manuel5cc

Please try with the github-develop docker tag and let me know how you go

Jan 17 '22 12:01 jc21

Please try with the github-develop docker tag and let me know how you go

Using the develop branch gives me a migration error in the database. [1/17/2022] [12:29:57 PM] [Global ] › ✖ error The migration directory is corrupt, the following files are missing: 20211010141200_ssl_passthrough_host.js [1/17/2022] [12:29:57 PM] [Migrate ] › ℹ info Current database version: 20211108145214

I think going back and forward messed up something.

Jan 17 '22 12:01 Manuel5cc

I was facing this logging in issue last night too but rebuilding both MariaDB and Nginx Proxy Manager containers solved it. Can't speak for anyone else using other types of DBs though. I will update here if things so south again.

NPM Version: v2.9.15 MariaDB Version: Version: '10.4.15-MariaDB'

Jan 17 '22 21:01 ACodingGenie

@Manuel5cc it looks like you've used a docker image tag from a PR that has not been merged, and that included a database migration. You will have to revert that migration.

this is MySQL specific:

drop table ssl_passthrough_host;
alter table user_permission drop column ssl_passthrough_hosts;
alter table user_permission add unique (user_id); 
delete from migrations where name = "20211010141200_ssl_passthrough_host.js";

but make sure you backup your MySQL data first, and next time you use a PR image backup everything beforehand and revert immediately after testing it.

Jan 17 '22 22:01 jc21

Please try with the github-develop docker tag and let me know how you go

@jc21 - Wasn't sure if this was to everyone, but I tried this and no difference. Same as before - cannot log in and same errors. Reverted back to 2.9.14.

Jan 17 '22 23:01 jiriteach

Tested the github-develop version. I'm able to login. But I'm not really sure if the error in the log below should be expected.

''' [1/18/2022] [6:29:50 AM] [Global ] › ℹ info Manual db configuration already exists, skipping config creation from environment variables, [1/18/2022] [6:30:04 AM] [IP Ranges] › ℹ info Fetching https://www.cloudflare.com/ips-v4, [1/18/2022] [6:30:04 AM] [Setup ] › ℹ info Added Certbot plugins certbot-dns-transip~=0.3.3 , [1/18/2022] [6:29:51 AM] [Migrate ] › ℹ info Current database version: 20211108145214, [1/18/2022] [6:30:04 AM] [Setup ] › ℹ info Logrotate Timer initialized, [1/18/2022] [6:30:04 AM] [IP Ranges] › ℹ info Fetching IP Ranges from online services..., [1/18/2022] [6:30:04 AM] [Setup ] › ℹ info Logrotate completed., [1/18/2022] [6:30:04 AM] [IP Ranges] › ℹ info Fetching https://ip-ranges.amazonaws.com/ip-ranges.json, [1/18/2022] [6:30:04 AM] [IP Ranges] › ℹ info Fetching https://www.cloudflare.com/ips-v6, [1/18/2022] [6:30:05 AM] [SSL ] › ℹ info Let's Encrypt Renewal Timer initialized, [1/18/2022] [6:30:05 AM] [SSL ] › ℹ info Renewing SSL certs close to expiry..., [1/18/2022] [6:30:05 AM] [IP Ranges] › ℹ info IP Ranges Renewal Timer initialized, [1/18/2022] [6:30:05 AM] [SSL ] › ✖ error Error: Command failed: certbot renew --non-interactive --quiet --config "/etc/letsencrypt.ini" --preferred-challenges "dns,http" --disable-hook-validation , [1/18/2022] [6:30:05 AM] [Global ] › ℹ info Backend PID 244 listening on port 3000 ..., An unexpected error occurred:, ModuleNotFoundError: No module named 'version', at ChildProcess.exithandler (node:child_process:397:12), at ChildProcess.emit (node:events:390:28), at maybeClose (node:internal/child_process:1064:16), at Process.ChildProcess._handle.onexit (node:internal/child_process:301:5), QueryBuilder#allowEager method is deprecated. You should use allowGraph instead. allowEager method will be removed in 3.0, QueryBuilder#eager method is deprecated. You should use the withGraphFetched method instead. eager method will be removed in 3.0, QueryBuilder#omit is deprecated. This method will be removed in version 3.0, Model#$omit is deprected and will be removed in 3.0., '''

Jan 18 '22 06:01 kjw1985

I finally decided to rebuild the container from zero using SQLITE instead of Mariadb and it seems to be working, however I haven't been able to generate wildcard certificates due to timeouts (no errors are shown in logs).

Jan 18 '22 09:01 Manuel5cc

Can confirm that the tag github-develop solved the issue

Jan 18 '22 14:01 jgunsing

It appears that the certbot-dns-transip plugin is installing v0.3.3 and the No module named 'version' error seems to indicate that it's only written for python 2, not 3 as we've been using. The latest version is 0.4.3, hopefully that works.

I've created #1773 to bump the version, but I am entirely unable to test it. Keep an eye on that PR for instructions to use the built docker image once it passes CI, and let me know how you go.

Jan 18 '22 21:01 jc21

@jc21 - Doesn't look to have fixed the issue with 2.9.15. Tried this PR and same as before. Not much in the logs -

[1/19/2022] [12:02:28 AM] [Global   ] › ℹ  info      Manual db configuration already exists, skipping config creation from environment variables
[1/19/2022] [12:02:30 AM] [Migrate  ] › ℹ  info      Current database version: none

Jan 19 '22 00:01 jiriteach

@jc21 Tested jc21/nginx-proxy-manager:github-pr-1773, no errors anymore and able to login. Haven't tested if the certbot-dns-transip is working correctly within this image, as I'm not using it (yet) in the container. I know that certbot-dns-transip 0.4.3 should be able to get wildcard certificate as I've used this in another container recently.

See output logs:


[1/20/2022] [11:31:48 AM] [Migrate  ] › ℹ  info      Current database version: 20211108145214,
[1/20/2022] [11:31:56 AM] [Setup    ] › ℹ  info      Added Certbot plugins certbot-dns-transip~=0.4.3 ,
[1/20/2022] [11:31:56 AM] [Setup    ] › ℹ  info      Logrotate Timer initialized,
[1/20/2022] [11:31:56 AM] [Setup    ] › ℹ  info      Logrotate completed.,
[1/20/2022] [11:31:56 AM] [IP Ranges] › ℹ  info      Fetching IP Ranges from online services...,
[1/20/2022] [11:31:56 AM] [IP Ranges] › ℹ  info      Fetching https://ip-ranges.amazonaws.com/ip-ranges.json,
[1/20/2022] [11:31:57 AM] [SSL      ] › ℹ  info      Let's Encrypt Renewal Timer initialized,
[1/20/2022] [11:31:56 AM] [IP Ranges] › ℹ  info      Fetching https://www.cloudflare.com/ips-v6,
[1/20/2022] [11:31:56 AM] [IP Ranges] › ℹ  info      Fetching https://www.cloudflare.com/ips-v4,
[1/20/2022] [11:31:57 AM] [SSL      ] › ℹ  info      Renewing SSL certs close to expiry...,
[1/20/2022] [11:31:57 AM] [IP Ranges] › ℹ  info      IP Ranges Renewal Timer initialized,
[1/20/2022] [11:31:57 AM] [Global   ] › ℹ  info      Backend PID 238 listening on port 3000 ...

Jan 20 '22 11:01 kjw1985

@jc21 - Any further ideas on what I can do to upgrade? Rolled back so using 2.9.14 ok. Thanks

Jan 20 '22 16:01 jiriteach

I'm also having the login issue with the version 2.9.15. Working fine on 2.9.14. In my case I have a database version in my logs but later there are multiple errors. I don't know what it the root cause so I added a link to my logs in case it could help. There is also a certbot issue (Command failed: pip install certbot-dns-ovh==$(certbot --version | grep -Eo '[0-9](\.[0-9]+)+') ) and a python error linked to cryptography-36.0.1.tar.gz. And also, thank you very much for the great work !

Jan 23 '22 00:01 X4V1

For all the noobs like me who basically catched the wrong timing on trying portainer, docker-compose and nginx-proxy-manager — here a docker compose file that works.

Because the bad gateway issue can come up

due to the bug here in the latest version
and/or blocking the database port accidentally by not explicitly saying DB_MYSQL_HOST: 'db'
and/or for europeans like me who are used to " doublequotes instead of american ' quotes

😵‍💫

So this uses the previous version that works 2.9.14 and routes the port correctly within docker compose by connecting to the db-container.

version: "3"
services:
  app:
    image: 'jc21/nginx-proxy-manager:2.9.14'
    restart: unless-stopped
    ports:
      # These ports are in format <host-port>:<container-port>
      - '80:80' # Public HTTP Port
      - '443:443' # Public HTTPS Port
      - '81:81' # Admin Web Port
      # Add any other Stream port you want to expose
      # - '21:21' # FTP
    environment:
      DB_MYSQL_HOST: 'db'
      DB_MYSQL_PORT: 3306
      DB_MYSQL_USER: 'npm'
      DB_MYSQL_PASSWORD: 'npm'
      DB_MYSQL_NAME: 'npm'
      # Uncomment this if IPv6 is not enabled on your host
      # DISABLE_IPV6: 'true'
    volumes:
      - ./data:/data
      - ./letsencrypt:/etc/letsencrypt
    depends_on:
      - db

  db:
    image: 'jc21/mariadb-aria:latest'
    restart: unless-stopped
    environment:
      MYSQL_ROOT_PASSWORD: 'npm'
      MYSQL_DATABASE: 'npm'
      MYSQL_USER: 'npm'
      MYSQL_PASSWORD: 'npm'
    volumes:
      - ./data/mysql:/var/lib/mysql

In Portainer: Go to Stack -> Add Stack -> Copy paste above and hit deploy.

Jan 28 '22 20:01 D1no

The transip plugin need to be upgraded to use rest api instead off soap

Jan 29 '22 18:01 CharlPels

For me it worked to have this db-image instead of the latest:

jc21/mariadb-aria:10.4.15-innodb

Feb 10 '22 12:02 kt-solutions

I'm using a SQLLite db so still no solution.

Feb 10 '22 15:02 jiriteach

I too am getting this error now. From upgrading from 2.9.5 to latest, running on a pi3 it seems to no longer allow me to log into admin. I get the same looking logs as @Jiriteach throwing errors looking for Python.h. These are my logs:

Installing collected packages: pycparser, wheel, setuptools, cffi
      Running setup.py install for cffi: started
      Running setup.py install for cffi: finished with status 'error'
      ERROR: Command errored out with exit status 1:
       command: /usr/bin/python3 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-htnwgplk/cffi_13957fe007254a8f9649c7db4d51ed37/setup.py'"'"'; __file__='"'"'/tmp/pip-install-htnwgplk/cffi_13957fe007254a8f9649c7db4d51ed37/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-w1n1_zlz/install-record.txt --single-version-externally-managed --prefix /tmp/pip-build-env-14ckdhvg/overlay --compile --install-headers /tmp/pip-build-env-14ckdhvg/overlay/include/python3.7m/cffi
           cwd: /tmp/pip-install-htnwgplk/cffi_13957fe007254a8f9649c7db4d51ed37/
      Complete output (37 lines):
      running install
      /usr/local/lib/python3.7/dist-packages/setuptools/command/install.py:37: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
        setuptools.SetuptoolsDeprecationWarning,
      running build
      running build_py
      creating build
      creating build/lib.linux-armv7l-3.7
      creating build/lib.linux-armv7l-3.7/cffi
      copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
      copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
      running build_ext
      creating build/temp.linux-armv7l-3.7
      creating build/temp.linux-armv7l-3.7/c
      arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -flto -fuse-linker-plugin -ffat-lto-objects -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
      c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
       #include <Python.h>
                ^~~~~~~~~~
      compilation terminated.
      error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
      ----------------------------------------
  ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-htnwgplk/cffi_13957fe007254a8f9649c7db4d51ed37/setup.py'"'"'; __file__='"'"'/tmp/pip-install-htnwgplk/cffi_13957fe007254a8f9649c7db4d51ed37/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(__file__) if os.path.exists(__file__) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-w1n1_zlz/install-record.txt --single-version-externally-managed --prefix /tmp/pip-build-env-14ckdhvg/overlay --compile --install-headers /tmp/pip-build-env-14ckdhvg/overlay/include/python3.7m/cffi Check the logs for full command output.
  WARNING: You are using pip version 21.3.1; however, version 22.0.3 is available.
  You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
  ----------------------------------------
WARNING: Discarding https://files.pythonhosted.org/packages/69/ed/5e97b7f54237a9e4e6291b6e52173372b7fa45ca730d36ea90b790c0059a/cryptography-2.5.tar.gz#sha256=4946b67235b9d2ea7d31307be9d5ad5959d6c4a8f98f900157b47abddf698401 (from https://pypi.org/simple/cryptography/) (requires-python:>=2.7,!=3.0.*,!=3.1.*,!=3.2.*,!=3.3.*). Command errored out with exit status 1: /usr/bin/python3 /tmp/pip-standalone-pip-swoc40_o/__env_pip__.zip/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-14ckdhvg/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'setuptools>=18.5' wheel 'cffi>=1.8,!=1.11.3; python_implementation != '"'"'PyPy'"'"'' Check the logs for full command output.
ERROR: Cannot install certbot-dns-cloudflare because these package versions have conflicting dependencies.
ERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/user_guide/#fixing-conflicting-dependencies
WARNING: You are using pip version 21.3.1; however, version 22.0.3 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.

[2/16/2022] [8:38:43 PM] [Migrate  ] › ℹ  info      Current database version: 20211108145214
[2/16/2022] [8:38:43 PM] [Setup    ] › ℹ  info      Creating a new JWT key pair...
[2/16/2022] [8:39:12 PM] [Setup    ] › ℹ  info      Wrote JWT key pair to config file: /app/config/production.json
s6-svscanctl: fatal: unable to control /var/run/s6/services: supervisor not listening
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 01_perms.sh: executing... 
Changing ownership of /data/logs to 0:0
[cont-init.d] 01_perms.sh: exited 0.
[cont-init.d] 01_s6-secret-init.sh: executing... 
[cont-init.d] 01_s6-secret-init.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
❯ Enabling IPV6 in hosts: /etc/nginx/conf.d
  ❯ /etc/nginx/conf.d/production.conf
  ❯ /etc/nginx/conf.d/default.conf
  ❯ /etc/nginx/conf.d/include/assets.conf
  ❯ /etc/nginx/conf.d/include/ip_ranges.conf
  ❯ /etc/nginx/conf.d/include/ssl-ciphers.conf
  ❯ /etc/nginx/conf.d/include/letsencrypt-acme-challenge.conf
  ❯ /etc/nginx/conf.d/include/proxy.conf
  ❯ /etc/nginx/conf.d/include/block-exploits.conf
  ❯ /etc/nginx/conf.d/include/force-ssl.conf
  ❯ /etc/nginx/conf.d/include/resolvers.conf
❯ Enabling IPV6 in hosts: /data/nginx
  ❯ /data/nginx/default_host/site.conf
  ❯ /data/nginx/proxy_host/6.conf
  ❯ /data/nginx/proxy_host/3.conf
  ❯ /data/nginx/proxy_host/7.conf
  ❯ /data/nginx/proxy_host/14.conf
  ❯ /data/nginx/proxy_host/5.conf
  ❯ /data/nginx/proxy_host/8.conf
  ❯ /data/nginx/proxy_host/1.conf
  ❯ /data/nginx/proxy_host/11.conf
  ❯ /data/nginx/redirection_host/1.conf
[2/16/2022] [8:46:29 PM] [Migrate  ] › ℹ  info      Current database version: 20211108145214

I've tried downgrading to 2.9.14, 2.9.11, 2.9.5, 2.9.4. No luck moving forward with any of these versions now. I'm also using mariadb with mine, I've tried using 10.4.15-innodb version there, latest, etc. Nothing helping so far. NPM is still running smoothly behind the scenes, all my existing proxies and redirects are working as expected. Just unable to log in.

Feb 16 '22 23:02 kevin-wynn

nginx-proxy-manager nginx-proxy-manager copied to clipboard

Cannot Log into Admin After Upgrade to 2.9.15

nginx-proxy-manager
nginx-proxy-manager copied to clipboard