EthernetENC

EthernetENC copied to clipboard

Hello, Can this library be used with [earlephilhower/arduino-pico](https://github.com/earlephilhower/arduino-pico) platform in PlatformIO? The compiling works, but the Pico freezes at the first packet the Ethernet receives. With the raspberry platform, the...

mionut22

Add support for sending multicast IP packets.

1

This commit extends the library to enable the transmission of multicast IP packets. Multicast packets differ from unicast packets only in their destination IP address. The only missing part in...

mlesniew

Port Reuse on TCP Connections

2

In my development Process with frequent restarting, I experienced issues with working code breaking after resetting or flashing. After some Packet inspection with Wireshark, I figured out, that upon reset,...

N0W0RK

Ping command with ENC28J60 + D1 mini Wemos ESP8266

3

I am using EthernetENC.h library ver. 2.0.4 with hardware ENC28J60 + D1 mini Wemos ESP8266 boards. I program the ESP8266 with Arduino IDE 2.1.0; I tested the example sketch “WebClient”...

Bruno1466

Problem by traffic through switches

4

the following structure: ENC-----Managed Switch------ENC ->No Connection between devices ENC-----Unmanged Switch------ENC ->Connection between devices i use the libs with an ESP32 devkit I have TP-Link and Netgear as Gigabit switches...

kobraevents

trying to send broadcast SSDP message

2

Hi, I am trying to send broadcast SSDP, based on this example https://github.com/arduino-libraries/Ethernet/blob/master/examples/UDPSendReceiveString/UDPSendReceiveString.ino by changing the IP to 239:255:255:250 and the port to 1900. But I don't receive any message...

fatmehosseini

Hello guys, im trying to understand what happen here, i have module connected SPI in STM32duino, i recive a code in IR and send it with UDP Using OSC Message....

ricardorector

Request setting custom hostName

1

Hi there, currently the hostname is hardcoded to ENC28J + the last three hex digits of the MAC address: https://github.com/JAndrassy/EthernetENC/blame/master/src/Dhcp.cpp#L195-L201 I was wondering if it could be possible to set...

DRSDavidSoft

Use pico-w with EthernetENC and WiFi problem

1

Hello, I have the two problem: 1. If I use bool before or after the Ethernet.begin(mac) ,will make Ethernet.begin(mac) stuck.but if bool's name first word is lowercase w~z Ethernet.begin(mac) will...

kestrel0907

can esp32-s2 use this library ?

1

can esp32-s2 use this library ?

gellary