Network Traditions LLC

> So right now I have "Enable SQM autorotate" enabled but "Enable this SQM instance is not checked, so does this mean the SQM is off but SQM autorotate is...

We experienced this with v0.58.5 r0+16336-b36068d35d on x86 per #2359: > Subsequently, I will continue testing v0.59 as it evolves and provide feedback where it will be helpful to the...

We did ultimately install a recent version of OpenWrt when first dealing with this issue to evaluated the I225 version B3 issue. It worked flawlessly with OpenWrt. When were were...

Because there are times where it seems to be necessary, I'm leaving it on permanently. The 5G USB 3.0 ModemManager wwan0 interface behaves quite similarly and can benefit from the...

Yes, I've updated our production HUNSN device because of the good results we observed on our Lenovo test system. That hardward however, does not have the Intel i225 NICs so...

@Ysurac @ioogithub as a result of realizing StarLink has an unusual DHCP configuration I stumbled across this issue with OpenWRT users that may be a more significant factor contributing to...

+1 Oracle Ampere instances can also easily be built with a Debian 11 ARM64 images as well. Been attempting to compile 5.4.65 on a Debian 11 instance per [compile instructions](https://github.com/Ysurac/openmptcprouter-vps/wiki/Compile-kernel),...

@hle5128 do you have the "Force link" option checked in the Network-Interfaces-Advanced Settings tab for the interface you have configured as DHCP? 

Interesting, that setting usual resolveds the DHCP loop. When we started working with OMR v0.58.5, this setting didn't always work. At that time, the Intel I225 drivers were not stable....

@adutchak degraded speed aside, as far as Starlink DHCP you may find this link helpful: [https://nelsonslog.wordpress.com/2021/04/07/openwrt-vs-starlink-dhcp-leases](https://nelsonslog.wordpress.com/2021/04/07/openwrt-vs-starlink-dhcp-leases). Combined with the details revealed #2584, you should have better success with Starlink DHCP...