Network Traditions LLC
Network Traditions LLC
@Kalimeiro if I'm understanding you correctly, your saying even though I've configured a port forward for the Asterisk UDP port range with the "vpn" source zone to the Asterisk local...
@Ysurac thanks for the feedback. I did switch the OpenMPTCProuter wizard "Default Proxy" to Shadowsocks. For the SIP TCP/UDP protocol a port forward to our FreePBX server IP with a...
@Ysurac thanks! With the default proxy set as ShadowSocks and multiple system log entries back to back as follows: > Tue Oct 4 23:26:15 2022 daemon.err /usr/bin/ss-redir[18807]: remote recv: Operation...
@Ysurac while testing the impact of the "Master interface selection", which during the aforementioned accumulation of: > daemon.err /usr/bin/ss-redir[18807]: remote recv: Operation timed out Starlink was set as the master...
@Ysurac we achieved reasonably stable performance with 75% of maximum throughput at an acceptable quality and latency from our high visibility StarLink and low grade signal T-Mobile WAN connections using...
Yes, StarLink v2 with Ethernet adapter in bridged mode so it provides the WAN2 IP address directly to OMR through it's DHCP service. FYI: To clarify the change of configuration...
Is DNS potentially an issue? Have you tried pinging something like google.com when it slows down to evaluate DNS performance as compared to pinging 8.8.8.8 from OMR and a connected...
I'm guessing you've already rebooted your VPS, but we have also noticed times when our speedtests drop to the 5Gbps down 1Gbps up a reboot of the VPS will restore...
For our Starlink v2 with the Ethernet adapter, we are using "bypass mode" so Starlink supplies a bridged DHCP IP address to the connected OMR Ethernet interface. We've had a...
Our OMR WAN interface is directly connected to the Starlink v2 Ethernet adapter, no switching equipment in between. We are back to using our HUNSN device with the i225 NICs...