Nerivec

Try this: - wake up the device by pushing its button once - keep the device awake by pushing its button at regular 1-2sec intervals until it's done configuring (below...

@kosmonot some devices have more specific quirks, did you check the [zigbee2mqtt docs](https://www.zigbee2mqtt.io/supported-devices/) for the device in question? You can also try to bring the device closer to the coordinator,...

Quick note, this also affects [Buffer](https://github.com/Nerivec/node-ts-testing/pull/17/files) and other related types that use the same mechanism. It makes a mess with narrowing, and node built-ins (& external deps...). Some of the...

@tabula-raza looks like the added detection for the ZBT-2 also ends up conflicting with the ZWA-2. Be sure to provide an explicit path in your configuration, so it does not...

@tabula-raza yes https://github.com/Koenkk/zigbee-herdsman/pull/1578 should fix it. I used your sample logs to add a reference test for it 😉

@TMV-NL this is unlikely to be the same issue. From what I can see, that error in deconz would point to the adapter not responding at all on start. Did...

> Is it possible that the adapter is broken? It's always possible, but more likely that it's a config issue / bug somewhere.

What deconz add-on are you talking about? Z2M works alone, if something else is using the adapter, then Z2M can't use it.

@Krzysztonek can you confirm 2.7.1 fixed the original issue?

@rascarvalho79 have you checked: https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html#error-srsp-sys-ping-after-6000ms-for-zstack-or-host-fatal-error-for-emberznet