NBMiner
NBMiner copied to clipboard
NebuTech
v41.0
Hi Team NB I have updated the version from 40.1 to 41.0 and I got some issues First, I cannot start the program normally. When I start it with common settings it hangs up. Program keeps hanging and restarting automatically, but at many times doing this, it starts my 3 video cards: 2 AMD radeon 6700 XT and a Nvidia 3070 LHR
Once It keeps mining for some time, suddenly one of my AMD cards reports 732Gh/s but really is not the speed. Settings for each card are the followind: AMD 6700 XT:
- CC = 2300
- voltage = 915
- VRAM = 2150
Nvidia 3070:
- CC = -250
- VRAM = 1500
- Powe = 51%
Attached image shows what I am saying.
As a notice, if I start same settings on same cards on the version 40.1 all of the video cards works normally (Nvidia with LHR 73.5)
Please let me know what else you want to review this case. Thanks in advance.
This discussion was created from the release v41.0.
Try running miner on nvidia gpus only (just use parameter -d 2)
Will this cause my amd gpu to stop working?
it looks there is problem with dual mining Nvidia + AMD. Disabled AMD in NBMiner, configured other miner for AMD and everything wokrs.
Try running miner on nvidia gpus only (just use parameter -d 2)
Will this cause my amd gpu to stop working?
Just try to narrow a scope of the problem. It could be helpful for developer.
Try running miner on nvidia gpus only (just use parameter -d 2)
Thanks for the advice. It works only for the Nvidia 3070, but still gets cyclic error at start.
As a possible solution, i disabled power limit in both AMD 6700xt from 915 to 1200 mW and despite some time in cyclic errors, once it starts it goes stable.
It seems for this version that the optimization in power consumption is not good as in the 40.1 release.
I hope one of the developers read this comment and if they want more info (maybe logs) I will help.
Thanks.
