NBMiner
NBMiner copied to clipboard
NebuTech
NBminer 41.0 Crashes PC after 1 or 2 min operation
Hello all,
My setup do have to GPU one 3060ti LHR and other is CMP70HX
NV drivers are 472.12
Normally I use nicehash however I tried NBminer manual update in nicehash folders. Miner keep restarting so I changed to use it as stratum however after 1 or 2 minute miner is crashing the pc.
Temps are around 60-70 c (3060ti watercooled) seems all normal with 40.1.
So should I need to something or wait so it can be more stable ?
Same here. 3060ti non LHR 3070ti x 2 3060 v2 Rig just turn off (without reboot) after 5-10 minutes after miner start. 512.15 drivers. Windows.
I've experienced the same problem. I've removed locked core clock / voltage. Now I'm using power limit and core clock to lower consumption and left the curve without modifications in MSI AB. RTX 3080 LHR 10GB - lhr unlocked and working stable now. Nvidia driver - 512.15
I've experienced the same problem. I've removed locked core clock / voltage. Now I'm using power limit and core clock to lower consumption and left the curve without modifications in MSI AB. RTX 3080 LHR 10GB - lhr unlocked and working stable now. Nvidia driver - 512.15
is it still working fine ? do you confirm removing lock clock was the solution for you ?
Having the same issue here. PC is running fine for a few hours, then at one point (despite conservative OC settings), the miner will simply stop responding, issue an error (or failed to connect to host error) and then shutdown the PC. One time, I had the "ERROR - Logger lock failed" error come up a few times.
too much overclock?
Nope, all OC setting zero and Afterburner app closed.
I will try to use driver 512.15 today let's how will it go.
3060ti ve 3070ti windows afterburner ayarını verecek olan bir arkadaş varmi. Sistemim çöküyor ayarlari yapamadım. Lütfen yardımcı olun
Aynı şekilde. 3060ti LHR olmayan 3070ti x 2 3060 v2 Rig, madenci başladıktan 5-10 dakika sonra kapanır (yeniden başlatma olmadan). 512.15 sürücüleri. Pencereler.
Afterburner ayarını atarmısın benim sistemim çöküyor 3060 3060ti ve 3070ti
Hi, I using 512.15 driver on Windows 10, removing afterburner, using oc settings from nbminer, working well!
Windows 512.15 yüklememe rağmen sistemimdeki tüm kartlar çöküyor. Mem1400 core 400 sistem iflas ediyor. Kartlarım 3060ti msi gaming z trio. Youtu.be videolarına baktım ona göre ayar verdim ama yemedi sistem çöktü
Nope 512.15 didn't work either still locking up. Also 512.15 didn't recognise CMP70HX card, so stupid....
Also same with nicehash still restarting 4 times and then gives unstable error.
Hello, same issues here. I just tried updating drivers to 512 and no luck. I run NBminer 41.0 as an administrator goes through the building dag process. Then boom
“mining program unexpected exit. Code: 1073741819, reason: process crashed restart miner after 10 sec …”
not sure how to fix this
Having the same issue here. PC is running fine for a few hours, then at one point (despite conservative OC settings), the miner will simply stop responding, issue an error (or failed to connect to host error) and then shutdown the PC. One time, I had the "ERROR - Logger lock failed" error come up a few times.
I've had some issues during the last 24 hours. Now I don't use MSI Afterbuner and the PC is much more stable with v.41.
Update: 21 hours without any issue. Stable hashrate and no interruptions. OC settings are set via nbminer.
I went with T-Rex miner, and I have the exact same issue. It's probably a "card" issue more than anything. I reduced OC even further (850 memory clock on a 3060 Ti) and it seems to crash less often. It's kinda sad, but I guess this is a crappy card that cannot be overclocked well (Hynix memory too).
So, the solution might be to dial back on memory clock even further than you think you should, and increase power limit by a percent or two. If it still crashes, dial it back again.
i have the same issue. Keeps crashing after 5 min. 512.15 driver, NB 41.3. Even without any oc.
Same issues with my asus 3060ti, in short download the latest driver but the latest "DCH" driver (not standard) current is 512.77 problems went away. My old driver that failed was 472.84 (standard)
