mfgtools
mfgtools copied to clipboard
NXPmicro
Freescale/NXP I.MX Chip image deploy tools.
Does mx6ull support uuu script FBK? I made a comparison between FB and FBK and found that FB could get feedback while FBK could not. I also found on NXP's...
raw2sparse is useless. Something is wrong with sparse area detection. With every data transfer to u-boot's fastboot (`m_sparse_limit` default 16M or modified 67M - doesn't matter) it sends raw data...
Using `uuu` version 1.5.21, but the issue exists on 1.4.139 as well. Haven't tried any other versions. Copying a file and then copying again with a truncated version of the...
Hi, I'm currently trying to flash multiple i.MX6 boards at the same time using release 1.5.21 on a Win10 PC. To this end I'm using multiple cmd instances calling uuu...
Based on some other issues reported here #334 , I did a simple test to reproduce a LIBUSB_ERROR_TIMEOUT problem that I have on a board: > SDP: boot -f imx-boot-sd.bin-flash_evk...
Hello, We are using a custom board based on imx6ull with uboot installed, we use FB mode of uboot to flash the rootfs image using `uuu` ``` sudo uuu -v...
Hello, I have been working on IMX-28EVK and installed the uuu and when I connected the IMx28 controller I can see it using uuu -lsusb  When I try to...
Any reason why the released files from the [1.5.21](https://github.com/nxp-imx/mfgtools/releases/tag/uuu_1.5.21) release were updated yesterday? This broke some of our yocto recipes as they all have a new checksum.
From a Linux host, I'm performing a flashing stress test on an iMX8 based board. I'm only flashing the bootloader (U-Boot). I'm using `libuuu_1.5.21-0-g1f42172`. The flashing script is dead simple...
Hei Guys, i am working on a raspiberry pi 3 model b+ :- Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux(new setup) Installed the UUU-Tool...
