Hackintosh-HP-Z420-MacOS-High-Sierra-10.13-10.14 icon indicating copy to clipboard operation
Hackintosh-HP-Z420-MacOS-High-Sierra-10.13-10.14 copied to clipboard

Published 20 hours ago • verified publisher icon NTT123

Issues with installation

Open brettjson opened this issue 7 years ago • 7 comments

Thanks for the resources. I was having a few issues and was wondering if you could help.

I have a Z420 with E5-1650 cpu and a gtx 1060. I am trying to put macos Sierra and having issues. I used unibeast 7.0.1 (I found an older version so it would be the same as your first guide). I then copy your clover folder (not the 10.13 one, the original one). I boot from the drive on the Z420 and select the macos option. I then get the following screen (attached). It thinks for a few seconds and then immediately reboots. I cannot get it to the apple screen.

I haven't tried High Sierra because on my current other hackintosh when I try downloading it, I only get a 20mb patch installer and not the full OS. I for the life of me cannot get my app store to download the whole macos high sierra.

Any help you can offer would be much appreciated. error

brettjson avatar Dec 19 '17 03:12 brettjson

Hi @brettjson, I never met this situation before. Some advice: (1) make sure using AHCI for hard drive, (2) try my CLOVER for 10.13 but rename /EFI/CLOVER/kexts/10.13 to /EFI/CLOVER/kexts/10.12 (3) make sure CLOVER directory in the right EFI partition.

NTT123 avatar Dec 19 '17 03:12 NTT123

Thank you for the quick reply.

  1. the bios is set to AHCI and not AHCI+RAID
  2. I tried the 10.13 clover with the change in the kexts dir and got the attached error
  3. I used EFI Mounter v3 and mounted the EFI of the flash drive (not my own hackintosh), I then moved the existing CLOVER dir to the trash and drag and dropped the one from the repo here into the EFI

With the 10.13 Clover: img_2481

I just cannot figure out why it isn't working. I looked at your closed issue and that person had a very similar issue as I did. When I used your 10.12 clover and booted into safe mode I got the same screen as he did: 27736164-97c2e65c-5dd5-11e7-978a-d1f360ef1dc5

He said his was fixed when he put the new CLOVER dir in, but I did the same with no luck.

Anyway, if you have any additional tips, I would be grateful.

brettjson avatar Dec 19 '17 04:12 brettjson

@brettjson, try NOT to use my CLOVER, use a new clover, only copy my kexts directories to the 10.12 kexts directory. Then, boot with flags npci=0x2000.

NTT123 avatar Dec 19 '17 04:12 NTT123

So, I tried to keep the original CLOVER folder and add your kexts. Interestingly there was not a EFI/CLOVER/10.12 folder on the EFI that Unibeast 7.0.1 made. So, I made a 10.12 folder and added your kexts. I did add the boot flag npci=0x2000 in the boot options once I booted into clover. I also booted -v and -x. Unfortunately, I had the exact same result.

img_2482

brettjson avatar Dec 19 '17 13:12 brettjson

@brettjson Take a look at https://www.hackintosh.zone/forums/topic/9709-solved-error-allocating/ and https://www.tonymacx86.com/threads/solved-error-allocating-0x-pages-at-0x-alloc-type-2.182907/ or https://nickwoodhams.com/x99-hackintosh-solving-osxaptiofixdrv-allocaterelocblock-can-not-allocate-relocation-block/

NTT123 avatar Dec 19 '17 14:12 NTT123

Interesting. Thank you. I will try that when I get home today. Hopefully it is as easy as changing the OsxAptioFIx file in the EFI.

brettjson avatar Dec 19 '17 23:12 brettjson

hi ! I am stuck at End RandomSeed. I copied the zip file and replaced the EFI folder. My GPU though, is a K2200 Quadro and my cpu is a 2690

ghost avatar Apr 10 '20 22:04 ghost