Incorrect RPM v0.3.3 (use v0.3.1 for now)

Open Mudgie0205 opened this issue 3 years ago • 2 comments

After setting a custom curve then restarting Deck or Client, the fan profile appears to use the speed of the highest curve point whichever corresponds to current device temperature.

Uninstalling or reloading does not help

Putting Deck into sleep mode then waking or adding/removing curve points solves the issue temporarily until a Deck or Steam Client restart.

This behaviour is NOT exhibited on v.0.3.1 and it works as intended.

Hope this helps

[After creating curve]

[After device restart] After restart

Sep 10 '22 15:09 Mudgie0205

Sounds like it could be an issue with something deadlocking, I'll look into it. Could you give me a log (/tmp/fantastic.log) from when it happens? That might be useful.

Sep 10 '22 16:09 NGnius

Sure. They only have 2 lines so I don't know how much use they can be though

fantastic.py.log fantastic.log

Sep 10 '22 18:09 Mudgie0205