Murmele
Indexer Crashed - AppImage 1.4.0
I use Gittyup as AppImage in the current version 1.4.0
Whenever I open a project in Gittyup, the following message appears in the log:
08:09 - Indexer Crashed - The indexer worker process crashed. If this problem persists please contact us at .
08:09 - Indexer Crashed - The indexer worker process crashed. If this problem persists please contact us at .
The following appears in the kernel messages:
[Wed Jun 5 08:09:04 2024] indexer[7887]: segfault at 0 ip 0000000000000000 sp 00007fffd4fb6518 error 14 in indexer[5f67b0499000+1b000] likely on CPU 5 (core 2, socket 0)
[Wed Jun 5 08:09:04 2024] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[Wed Jun 5 08:09:04 2024] indexer[7892]: segfault at 0 ip 0000000000000000 sp 00007ffc93998578 error 14 in indexer[625f6e756000+1b000] likely on CPU 1 (core 0, socket 0)
[Wed Jun 5 08:09:04 2024] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Best regards munin2k
I was using the flatpak version of gittyup, when it suddenly stopped showing the gui, as per https://github.com/Murmele/Gittyup/issues/783
I've found that the AppImage version of gittyup does work, but when I open any project, even if it is one that I haven't touched in a long time, I'm getting an index error:
" 8:36 PM - Indexer Crashed - The indexer worker process crashed. If this problem persists please contact us at ."
This problem happens even if I shut down Gittyup, delete .git/gittyup from my project folder, then run Gitttyup and point it at my project folder again.
This problem happens even if I open a project I haven't touched in weeks, so I don't think it is in any way something to do with corruption in my current project.
I am getting general protection fault kernel messages, different from issue 776:
[ 1407.924787] traps: indexer[5038] general protection fault ip:7ffc51f1fcd0 sp:7ffc51eb5fb8 error:0 [ 1408.070674] traps: indexer[5040] general protection fault ip:7fff3adc3cd0 sp:7fff3ad8f8b8 error:0
NOTE: this error only happened today, so I don't think it was happening with the flatpak version of gittyup.
Notice, too, that the poster of issue 776 is using the AppImage version of Gittyup.
When I ran a "strace ./Gittyup-1.4.0-x86_64.AppImage |& tee gittyup.appimage.strace.log" and did a "grep indexer gittyup.appimage.strace.log", I find the following:
stat("/tmp/.mount_GittyuJgFfOi/usr/bin/indexer", {st_mode=S_IFREG|0755, st_size=2505704, ...}) = 0 stat("/tmp/.mount_GittyuJgFfOi/usr/bin/indexer", {st_mode=S_IFREG|0755, st_size=2505704, ...}) = 0
I DO see /tmp/.mount_..../usr/bin/indexer while Gittyup is running.
I see there is a "src/index/indexer.cpp" in the Gittyup source tree.
Can someone toss me a clue? What is this indexer?
I considered some odd problem with AppImage having permission issues when mounting /tmp/mount_...., so I extracted the contents of the Gittyup AppImage, which created a squashfs-root directory tree with Gittyup in it. When I did a cd to squashfs-root and ran ./AppRun, the files were run in place. No /tmp/mount_... was created.
The same problem occurs:
12:41 PM - Indexer Crashed - The indexer worker process crashed. If this problem persists please contact us at . 12:41 PM - Indexer Crashed - The indexer worker process crashed. If this problem persists please contact us at .
FIXED...?
I was beat and ready to give up, then I thought I would give Gittyup one last shot.
I cloned the repository and compiled from source, AND IT WORKED.
I get a GUI, and I don't get "Indexer Crashed". Gittyup works perfectly. I can create a new repository. I can open my existing project.
I compiled from master, not from the most recent development branch. I've tweaked the build script for my purposes. WARNING - this will delete the Gittyup directory WARNING - I don't know what I'm doing NOTE - I am not using "git checkout deps", but the result works fine WARNING - did I mention that I don't know what I'm doing?
With that said, the following is a script that "works for me" on my up-to-date Debian system. I figure it should work for Ubuntu and similar, based on apt.
===============================================
sudo apt install build-essential libgl1-mesa-dev sudo apt install cmake sudo apt install libgit2-dev sudo apt install cmark sudo apt install git sudo apt install libssh2-1-dev sudo apt install openssl sudo apt install qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools sudo apt install qttools5-dev sudo apt install ninja-build
rm -rf Gittyup git clone https://github.com/Murmele/Gittyup.git cd Gittyup
git checkout master git pull origin master
git submodule init git submodule update
cd dep/openssl/openssl/ ./config -fPIC make
cd ../../.. mkdir -vp build/release cd build/release cmake -G Ninja -DCMAKE_BUILD_TYPE=Release ../.. ninja
===============================================
This was after I tried the following (which failed):
flatpak uninstall com.github.Murmele.Gittyup rm -rf ~/.var/app/com.github.Murmele.Gittyup rm -rf ~/.local/share/flatpak/Gittyup rm -rf ~/.local/share/Gittyup rm -rf ~/.config/gittyup.github.com rm -rf ~/python/step4
Then, I start the AppImage version of Gittyup and create a new project at ~/python/step4, and I get the same "Indexer Crashed" error.
Then I "flatpak install com.github.Murmele.Gittyup" and run the flatpak version, and still, no gui.
I really didn't want to reinstall my system from scratch, only for something unknown to change, and have Gittyup stop working again.
I've figured out why indexer is segfaulting, and other stuff. I am looking for feedback. Please see: https://github.com/Murmele/Gittyup/discussions/789