MrDrem

I've been adding in additional logging in my personal fork - https://github.com/MrDrem/enviro.git Generally I've tried to add it where there is an action happening, so for example on the wind...

I'll try to take a clone of the `patch` branch tonight, and see if I think there is anywhere else where logging might be good. I suspect that I'll find...

It may be that this is a battery issue, I'm recharging the battery, and we'll see how it goes.

So, I'm not sure what upset things, but the clock didn't want to reset or connect to the time server to get a new time. Reflashing with the 0.0.8 image...

So there is certainly something odd going on with the Real Time Clock on my enviro weather. I've had it sat indoors charging via the [Amigo Pro](https://shop.pimoroni.com/products/lipo-amigo?variant=39779302539347) today, and it...

OK, so here's another, and this is getting really really odd, sorry! Log file below. 20:55:02 - wake, connected to wind sensors, all looks good, wake set to 21:00 21:00:01...

~~OK, so its not the wind sensors, as I've just put it outside without them connected either, and it's still falling over after a couple of readings in exactly the...

I guess shortly is relative, but it's now reconnected, and seems to be working, although I think that I am updating the RTC every reading. I still don't understand the...

Spoke too soon, it stopped again, log files to follow later. :( I'm going to break the below into a set of records so that the errors can be seen...

I've gone back to the 0.0.7 firmware by flashing with the flash_nuke.uf2 file, then the pimoroni-picow_enviro-1.19.7-micropython-enviro-v0.0.7-test.uf2 file and finally the enviro-v0.0.7-filesystem-only.uf2 file, and although it got stuck, I'm not sure...