MrChromebox
Incorrect reference link for Drawper board in supported devices list
The Drawper board link should direct to the correct reference photo for the Drawper board instead of the Drawman board https://docs.mrchromebox.tech/images/wp/Drawman_wp.jpg
you have a board picture for DRAWPER? AFAIK they are the same
when i looked for something matching the reference image in my chromebook, i couldn't find it - also i'm not sure where the jumpers are (there are 2 jumper pairs on the bottom left, but i dont know if either are for write protect)
additionally, theres what looks like a screw on the bottom right, labeled HWWP
can you provide a clearer picture of the jumper block in the upper left? It's likely one of those two. The HWWP marking does not appear to be a label for a screw.
can you provide a clearer picture of the jumper block in the upper left? It's likely one of those two. The HWWP marking does not appear to be a label for a screw.
assuming you mean these, is it the rightmost pair?
assuming you mean these
correct
is it the rightmost pair?
there's no way to determine that without the schematics other than trial and error
assuming you mean these
correct
is it the rightmost pair?
there's no way to determine that without the schematics other than trial and error
whats the worst case if its not, also would suzyq work in shimmer? i cant enable devmode without it reenrolling me
whats the worst case if its not,
most likely that the device will still have WP enabled
also would suzyq work in shimmer? i cant enable devmode without it reenrolling me
I don't have any idea about shimmer. If the device is managed then the CCD interface will be locked and you can't disable WP that way.
whats the worst case if its not,
most likely that the device will still have WP enabled
also would suzyq work in shimmer? i cant enable devmode without it reenrolling me
I don't have any idea about shimmer. If the device is managed then the CCD interface will be locked and you can't disable WP that way.
i'm unenrolled but without devmode atm
again, no idea because you've used shimmer and your device is in a state I'm not familiar with