Leviathan icon indicating copy to clipboard operation
Leviathan copied to clipboard

Published 20 hours ago • verified publisher icon MotorDynamicsLab

other users

Open Magneticrob1 opened this issue 1 year ago • 4 comments

are there any other users of this board on here, i have put bootloader and firmware on but cant connect to any external can modules. is there a original bootloader file available anywhere

Magneticrob1 avatar Jan 14 '24 20:01 Magneticrob1

I am trying to connect to the EBB36 V1.2 and I think I have the same problem, it only has one can bus ID when it's connected. I also don't know how to setup the MCU for the can bridge.

~/klippy-env/bin/python ./klippy/console.py -c can0 gives me an error file not found

midicdj1000 avatar Jan 16 '24 20:01 midicdj1000

I flashed my EBB board with the stm programmer and I have it working.

midicdj1000 avatar Jan 17 '24 10:01 midicdj1000

I was able to get mine flashed/connected up using the CB1 eMMC with the Pi4B board as my Pi.

Mattang-Tim avatar Feb 05 '24 02:02 Mattang-Tim

are there any other users of this board on here, i have put bootloader and firmware on but cant connect to any external can modules. is there a original bootloader file available anywhere

Have you also activated the CAN interface under Linux?

JNP-1 avatar Feb 07 '24 16:02 JNP-1