V0.2 Toolhead Spacer

[will-janz]

The V0.2 toolhead spacer has a few problems around it:

• The Build Notes for V0-S1 + V0.2 Upgrade kit point to a different strain relief model (see note about page 180).
• The Printed Parts Guide (V0.2-S1 Kit Rev. A) links to the V0.1 version of the model.
• toolhead_spacer_v02.stl has the mount and a floating spacer in the same model.
• The new toolhead spacer/mount leaves a gap since the stock spacers don't fit, see attached image.
• It's unclear what the top hole is for.

[chilipeppr]

I too am wondering what the top hole is for. I'm trying to wrap up my build and I keep thinking there needs to be more strain relief on the umbilical cord and that's what the top hole is for, but no part seems to match it. Anybody know?

[chilipeppr]

Just following up, it seems to me the ideal part to screw into that M3 hole on the top of the LDO voron 0.2 picobilical toolhead_spacer_v02.stl is this top strain relief piece as its own part you can screw in.

[nebulorum]

I saw this post and was wondering the same thing. Did you find a fix?