Midea-heat-pump-ESPHome

Midea-heat-pump-ESPHome copied to clipboard

Error modbus

7

I dont get the data good to homeassistant and get the following errors, dont knownwhere i have to look to resolve it ` 10:06:12][E][modbus_controller:091]: Modbus error function code: 0x3 exception:...

alexswart

Switch with bitmask option

13

Hi Mosibi great job, I have a question for the switch with the bitmask option. When I turn on the switch the bitmask goes on. When I turn off the...

matteo80

publish to mqtt

1

Hello, is it also possible to publish the sensor data to mqtt? i would like to use the dashboard from the panasonic heisamon not al the functions should work but...

alexswart

Update heatpump controller

4

Added full support read/write Registers 0, 5, 210, 211 Added COP calculation Added human readable uptime counter of controller Added Some default icons for homeassistant and web interface Change check...

rysiulg

Status unknown

10

Hello, At the moment I get "Heatpump status" "Unknown". I checked the code for the sensor and this is like this: ``` lambda: |- if (id(${devicename}_load_output_run).state) { // The heat...

bkbartk

Midea Wired Remote Controller KJR-120

2

Hello, I’m planning to buy a Ferroli Heat Pump that uses a remote wired controller based on the Midea KJR-120 Modbus mapping. After comparing the mapping from the file provided...

wizardmelon