Cristiano Monteiro

Hello, Same here. Can never get past the last line:  `platformio.ini` [env:genericSTM32F103CB] platform = ststm32 board = bluepill_f103c8_128k framework = arduino upload_flags = -c set CPUTAPID 0x2ba01477 debug_server =...

Hi, Thank you for the prompt reply. Yes, tried the full path in the past and tried again just now. Does nothing. The entire outcome of my debug console is...

Hi Max, Replaced debug_server with the newline-separated you supplied and it indeed works! No further changes needed. Many thanks!

Got the same issue with a different brand of reader. In my case, I even tried proxmark3 cloning to a blank key (besides flipper emulation) and the reader didn't detect....

Mine also came with this tiny tube, counts were like 1/3 of what you would get with a larger one. So, I replaced mine with an M4011 and, out of...

> The smaller tube has both electrodes on the same side so what that jumper seems to do is bring the negative pole next to the positive one. Removing the...

Took notes of BS (no real source here, unfortunately) before and after the conversion (CPM and uSv/h). Also, compared with other units I have (a GC01- running RadPro - and...

> @Montecri > > > Can anybody, who got one with the larger tube already installed, confirm if this jumper is opened or closed? > > Can confirm, R102 is...

Just to add data to the topic When I received the Bosean FS-5000, my first impulse was NOT to crack it open, since I was already having fun with GC-01....