Minlor
Lumisync doesnt find any device
I am using CachyOS and it cannot find my Govee G1. When i try to connect it with bluetooth it sees the lights but also doesnt connect.
Hello, Thanks for the issue but currently this project is only meant to work with the models which are able to connect with WiFi to your network, in case they are connected to the Network but the Program can't find them I'd recommend checking in the settings of your LED Device within the Govee mobile app there should be a settings called "Lan Control" make sure it's on and in some scenarios you may have to wait up to a hour or two for the device to finally start showing up.
For Bluetooth connectivity It might be a thing in the future
@Minlor Is there any way to just specify the IP of the device? I can happily control the device when using the IP with a Stream Deck Plugin (Govee Light Controller), but lumisync doesn't find the device. If I were to hardcode the IP, I could happily control the device I believe.
@Minlor Is there any way to just specify the IP of the device? I can happily control the device when using the IP with a Stream Deck Plugin (Govee Light Controller), but lumisync doesn't find the device. If I were to hardcode the IP, I could happily control the device I believe.
@DennisGaida currently the only way to possibly do it would be to manually edit the .json file which would contain the detected devices and then just adjusting the timestamp to something really high I believe should do the trick.
But in the future it would be useful to allow to manually add devices.
Hope this helps and if it doesn't please let me know and I'll see what else could be done as a workaround in the meantime
@Minlor manually edit the .json file which would contain the detected devices
And where might I find "the .json"? Also it may be empty since I don't have any devices, so a default / example json would be beneficial.
@Minlor manually edit the .json file which would contain the detected devices
And where might I find "the .json"? Also it may be empty since I don't have any devices, so a default / example json would be beneficial.
I have just updated the project to allow you to add the device manually using the GUI. 😄 Update it to the latest version now (0.3.0)