MilesTEG1
MilesTEG1
> If that ZLinky_TIC is the cause of the errors, unfortunately, it may not be fixable without a firmware fix on that device (if that device keeps reporting with address...
> It's a little strange this behavior. Not sure what's going on behind the scene there... 👀 > > --- > > You can use USB or TCP (just point...
> To get an address conflict on zero, technically you'd need a device that reported as "coordinator" (the only device supposed to have address zero in a ZigBee network). _Granted,...
Bonjour, Pour faire une whitelist, c'est bien ici que ça se passe ? ``` Tic command whitelist List of TIC commands to be exposed (separated by comma). Reconfigure device after...
> Bonjour, Oui, c'est exactement ça @MilesTEG1 Bonjour, Nickel, j'ai mis ceci : `EAST,EASF01,EASF02,EASF03,EASF04,EASF05,EASF06,LTARF,URMS1,UMOY1,SINSTS,IRMS1,Linkquality` Et j'ai reconfiguré le ZLinky. Depuis, je n'ai plus les erreurs occasionnelles de récupération de valeurs...
> Hmm... that sounds pretty weird. > > Disclaimer: I did not try the following myself - try it with caution (i.e. backup your firefox profile). > > You can...
Following- similar issue
> @robotsmarthomes and @MilesTEG1 can you confirm your adapter type/model, and setup for z2m and if it's exactly the same, or just similar? Hello 👋🏻 I posted [this issue](https://github.com/Koenkk/zigbee2mqtt/issues/23198) some...
Same issue here since I set the default location for backup on a remote smb share (on my NAS).