MiddlemanTM

> Enabled DisableRTCChecksum and disabled SSDT-TB3HP.aml but still no progress on the apple logo boot (froze). > > USB is working yes (im using a usb stick to boot into...

> 升级到了11.6之后就变成这样了 You have to do the following: 1) Physically remove HDD/SSD from computer system. If you cannot, run macOS Recovery from boot menu 2) On the Mac or another...

Just thought to share this. I recently did a bit of an experiment. With my unsupported RX6600 I managed to boot into the Catalina installer with my card on a...

> You can debug by installing the debug version of Opencore and relevant kexts across your build which is covered here. > https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/debug.html In general to get Rocket Lake graphics...

> Rocket lake iGPU (UHD630?) is different from Ice Lake iGPU (G7)... What's your iGPU model? I noticed that with the IceLake ig-platform-id 0100518A spoof (and emulate cpu, device-id) the...

Okay I've just done some interesting research. Looks like the system Leon0410898 used was an i7-1065G7 and looking at his EFI, his IGPU device properties were these: ![Screenshot 2022-04-08 at...

> Thanks, tried the above. > > Now it's booting to a black screen. Log mentions "link training failed", googling turns up no results. Also a lot of "FB1: is...

> Do you know if I can (and where) get said connector bus and index information from Linux? Under macOS you could try Hackintools. As for Linux, lspci, gfxutil and...

> Damn. Just bought a Tiger Lake thinking that it would be a piece of cake to install Hackintosh. And now I'm searching like crazy for a IGPU fix. It...

If Alder Lake is going to be added, I presume a similar guide for Rocket Lake should also be in order since that is missing too?